It depends. If you are installing inside mount blinds, then the bottom of the blind should fit snugly against the window sill. This will give the blind the best fit and allows it to block out the most light.
The headrail should be even with the top of the window frame. Outside mount blinds should hang approximately 2-3 inches above the window sill. This will allow the blind to properly clear any window handles or cranks.
In addition, hanging the blind above the window sill also provides increased light control and added privacy.
How far off the window sill should vertical blinds be?
It is important not to install vertical blinds too close to the window sill or frame as it can prevent the vanes from closing properly or fully. The ideal measurement for blinds installed on a window sill is to extend 5-6 inches from the window sill.
This will ensure a complete closure of the blinds and ensure you don’t have any gaps in between the wall and fabric when the blinds are closed. In addition to providing more effective light control and privacy to your home, this distance also prevents minor damage to the vanes since they will not be in contact with either the window sill or frame.
How much of a gap should I leave for blinds?
When installing blinds, the general rule suggested by professionals is to leave a gap of about 10-15mm (1/4 inch – 1/2 inch) between the window sill and the bottom of the blind. This gap is important for several reasons.
Firstly, it allows some airflow, ventilation and prevent condensation from forming on the windowsill and window blinds. Secondly, it prevents the blind from rubbing against the sill, which can cause damage to the blinds over time.
Thirdly, it keeps the blinds away from any protruding edges or handles which could be at risk of damage when the blinds are lowered. Finally, the gap will allow more light to filter through, creating a more completed, finished look.
Where should blinds sit on a window?
The best place for your window blinds depends largely on the window itself and the surrounding area. Generally speaking, blinds should be positioned just above the windowsill. This offers maximum coverage of the window, while also giving you some flexibility to open and close your blinds as desired.
Be sure to measure the height of your window before purchasing blinds, as standard sizes may not be suitable depending on the dimensions of your space.
When installing blinds, it’s important to consider the flow and purposes of the area. In living room spaces, you may prefer to have the blinds out of the way, so they don’t disrupt the line of sight.
If you’re installing blinds in a bedroom, you may want to install them on the inside of the window frame. This can provide the best privacy, and may block out more sun. When positioning your blinds near a door or walkway, be sure to leave enough space between the blinds and frame so the door can be opened and closed without obstructing them.
Be sure to take your time when selecting blinds and installing them properly. The results should be beautiful window treatments that fit well with the style and ambiance of your space.
Should blinds be flush with trim?
It is generally recommended that blinds be flush with trim for a finished, professional look. When installed correctly, this provides a clean, minimalist look that goes perfectly with most interior decor.
The ideal installation is to have the blinds slightly sunken into the window trim, allowing for the trim to help hold them firmly in place during opening and closing. Additionally, installing the blinds flush with the trim helps draw the eye to the trim and create more of a focal point, which is more desirable than seeing the blinds sticking out.
However, if you want to emphasize the windows in your decor it can be beneficial to recess the blinds farther into the window frame and allow them to partially cover the trim, creating a stronger contrast.
When in doubt, consulting a professional is recommended as they can help ensure the perfect fit and look for your windows.
Is it better to put blinds inside or outside of the window?
Whether it’s better to install blinds inside or outside of the window depends on several factors. First, you should consider the size of the window in relation to the size of the blinds. If the blinds are larger than the window, or if you want the window to be fully blocked from light or be less visible from the outside, then it makes sense to put the blinds on the outside of the window.
If the blinds are smaller than the window, then mounting them inside the window frame provides more even coverage.
Secondly, you should keep in mind the function of the blinds. If you have light colored blinds that tend to show more dust and fingerprints, then you may want to install them on the outside of the window to protect them from fingers and other surfaces.
On the other hand, if you have privacy concerns, then blinds placed on the inside of the window can provide more coverage while still allowing some light in.
Finally, it is important to consider your personal preference and the overall look you are trying to achieve when deciding whether to put blinds inside or outside of the window. Both options have advantages and disadvantages, so think about your individual needs and the size and features of the window before making a final decision.
Where should blinds be placed in recess?
Blinds should be placed inside of a recess to maximize light control and improve privacy. When placed directly inside the recess, the blinds will be hidden from view when opened, which improves the overall aesthetics of the room.
If the blinds are placed so that there is an overlap of the sides of the recess, this will give an extra layer of insulation for added energy efficiency. The exact placement of the blinds will depend on the type of blinds chosen, and how much control over privacy and light is desired.
For example, Venetian blinds offer good control over privacy and light but they also reduce the amount of natural light that can enter the room, while roller blinds can be placed higher up to allow more sunlight in.
Generally speaking, it is always advisable to have a professional measure and fit the blinds to ensure the best possible result.
Should blinds face up or down second floor?
The answer to this question will depend on several factors, such as the size and function of the windows, the level of privacy needed and desired, and the amount of sunlight desired or needed in the space.
Generally speaking, if windows are larger and provide a space with more privacy, then having the blinds facing down may be more appropriate. This also provides a space with more control over the amount of light and air flow entering the space.
If the windows are smaller and need more natural light and air flow, then having the blinds facing up may be more appropriate. Ultimately, this decision should be based on the use, privacy and light needs of the room.
Which way are blinds supposed to face for privacy?
Blinds should generally be facing outward so they are parallel to the window in order to provide the maximum amount of privacy. This means that the slats of the blinds should be facing away from the window and so anyone on the outside of the window looking in won’t be able to see through them.
For further privacy, try tilting the bottom of the blinds slightly downwards towards the outside of the window so that it blocks any vision from below. Another option is to hang curtains on either side of the blinds so that there is a double layer of fabric blocking the window from the outside.
Is it OK to get blinds longer than the window?
Yes, it is ok to get blinds longer than the window. This will give you more control over light, privacy, and insulation as well as improve the overall aesthetic of your space. By extending the blinds beyond the window, you are shielding more of the window itself, thereby resisting more of the heat, glare, and light that come in from outside.
You can also improve the privacy of your space by extending the blinds wider and by tilting the blinds to a closed angle. Additionally, long blinds create a more cohesive look with the rest of your décor and can protect flooring or other furniture near the window in the case of high winds or strong sunlight.
How much smaller should blinds be than the window for inside mount?
The amount by which a blind should be smaller than the window for an inside mount depends on the type of blinds being used. Generally, for most common blind types, such as horizontal or vertical blinds, a 1/2 inch overlap is recommended on the sides and top, and a 1-inch overlap is recommended on the bottom.
This allows the blinds to hang properly, as well as creating a closure to block out light. If the blinds are being mounted on the exterior of the window frame, a thicker overlap may be needed in order to ensure the blinds hang properly.
Additionally, other factors to consider include the width of the tilt rod, availability of mounting space (to make sure your blinds don’t interfere with your window treatments) and the size of the window.
Does it matter if blinds are too long?
Yes, it does matter if blinds are too long. Longer blinds may cause them to cover too much of a room or window, preventing the light from entering or allowing too much light to enter. This can cause disruption to natural sunlight and light dispersion, creating a glare.
Additionally, too-long blinds can be difficult to reach when one wants to adjust them and can be visually unappealing. Furthermore, they can be hazardous if they drag along the floor and become a tripping hazard.
It is important to measure the window or area where the blinds will be installed in order to get the correct size. If the blinds are too long, they can be trimmed or adjusted to the correct size.
How much wider than the window should a roller blind be?
When choosing the size of the roller blind, it should be wider than the window by at least 4-6 inches on each side for a standard size window. For a larger window, it may require several more inches on each side.
This will ensure the fabric is fully covered and can be pulled up to either side of the window frame. It also helps create a more aesthetically pleasing appearance, as the edges of the pull down the blind far can give a more finished look.
Additionally, a wider blind may also block more light from coming in, depending on the material and fabric used.
How do you determine the width of blinds?
To determine the width of blinds, you first need to measure the exact width of the window or opening of the area that you want to cover with the blinds. There are a few different methods of measuring the width of your window:
1. Measure the width of the inside of your window frame. To do this, measure from one inside corner of the window to the other and make sure to note the measurements in both inches and centimeters.
2. Measure the window including the trim. If you want to cover the window trim and have the blinds extend all the way to the outside corners of the frame, measure from one outside corner to the other and make sure to note the measurements in both inches and centimeters.
3. Measure the outside of your window frame. This method is best for windows that do not have trim. Measure from one outside corner of your window frame to the other and make sure to note the measurements in both inches and centimeters.
Once you have measured the exact width of the window or opening, you will then know what size blinds to buy. Most blinds allow for an overlap of about 1/2 to 3/4 inch, so make sure to add the desired overlap to your measurements when selecting the size of blinds.
How do I choose blind width?
When choosing blind width, there are a few factors to consider. First, consider the size of the window. If the window is too small, it may be difficult to find the right size blind, whereas if the window is too large, a large blind will be necessary.
You should also measure the opening in which the blind will be placed to make sure that the blinds are not too small or too large. It is important to select blinds that are appropriate for the size of the window, as well as the decor of the room.
In addition, you should take into account the amount of privacy and light control you are looking for. If you want greater darkness in the room, then you should look for wider blinds that provide more coverage.
If you are looking for a more open feel with more natural light, then you should select blinds that are slimmer and not too wide. Taking into consideration the size and purpose of the blinds will help you to decide on the appropriate width for your window.
How wide should curtains be for 72 inch window?
When selecting curtains for a 72-inch window, it is recommended to opt for curtains that are at least double the width of the window. So for a 72-inch window, curtains that measure 144 inches in width or more would be ideal.
Additionally, to get a full and dramatic look when the curtains are open, choose curtains that are at least three to four times wider than the window. For example, if your window is 72 inches wide, select curtains that are at least 216-288 inches in width.
The extra fabric allows for beautiful draping, especially when the curtains are open. Additionally, you can layer different curtain materials to create a more dramatic effect. Choose the main curtains to be three to four times the width of the window and the valance to be two times the width of the window.
What size blinds for 35 inch window inside Mount?
The size of the blinds for a 35 inch window inside mount will depend on whether you plan to have the blinds overlap the window frame or not. To ensure a proper fit, it is best to measure the window opening as well as the frame.
If you plan to have the blinds overlap the window frame, you should select a blind size that is 1/4-1/2 inch wider and taller than the window opening. For example, the blinds for a 35 inch wide window would be 35 1/4-35 1/2 inches wide.
If you plan to have the blinds fit within the window opening without overlapping the window frame, you should select a blind size that is 1/2-3/4 inches less wide than the window opening. For example, the blinds for a 35 inch wide window would be 34 1/2-33 3/4 inches wide.
Regardless of which option you choose, you should always double check the measurements and remember to factor in the depth of the mounting brackets.
How do I measure for inside mount blinds?
Measuring for an inside mount blind begins with measuring the inside of the window frame from one side to the other. When measuring, you must use a metal tape measure for greater accuracy. To ensure a perfect fit, it is important to round down the width measurement of your blind to the nearest 1/8th of an inch.
The same process should be followed for the length of the window, again rounding down to the nearest 1/8th of an inch. Before making your final measurement, add a minimum of 2” to the width and 3” to the length to allow space around the mounting brackets and to ensure the blind hangs properly.
This will help ensure a smooth blind operation and keep the blind from sticking to the frame or window sill. Once you’ve measured, take your final inside measurements to pick out the right size and style of blind.
Do blinds have to fit inside the window?
No, blinds do not necessarily have to fit inside the window. Most standard and custom-made window blinds can be mounted both inside the window frame, called an “inside mount”, or outside the window frame, called an “outside mount”.
An inside mount usually requires less installation work, requires less room for the blind to operate and can give a more modern finished look. An outside mount requires more installation work, requires more room for the blind to operate, and generally costs more due to more materials being needed to accommodate the installation.
If there is any obstruction, such as window handles or cranks sticking out, an outside mount is the preferred and preferred safer option. For example, in places such as a bathroom, or a room with high humidity, an outside mount is recommended.
Ultimately, it really depends on the type of window and the specific measurements as well as any architectural features of the window itself.