No, an extension cord should not be used for a dolphin. Extension cords are designed for use with electrical items that have a relatively low power consumption, such as lamps or computer equipment. Items like a dolphin have a higher power consumption and require more power than is available from an extension cord.
Additionally, an extension cord is not water-resistant, and since you will likely be using your dolphin in water, the cord would be at risk of damage from the water. For safety reasons, it is important to only use marine-grade power cords for any items that you plan to use in the water.
How long is the power cord on a dolphin pool cleaner?
The cord length of a dolphin pool cleaner can vary depending on the model. The bulk of Dolphin pool cleaner models come with a 60 ft power cord. However, some models, such as the Dolphin Nautilus CC Plus, come with a 50 ft power cord.
The Dolphin Triton PS Plus comes with a 90 ft power cord, and the Dolphin Supreme M3 and M4 Robotic pool cleaners come with an 80 ft power cord. To find the exact length of your specific model, you should check the product specifications or contact the manufacturer for more information.
Can I leave my dolphin pool cleaner in the pool?
Yes, you can leave your dolphin pool cleaner in the pool as long as it is not being used for a long period of time. It is recommended that you remove the cleaner from the pool and store it in a dry place when it is not in use.
This will help protect and extend the life of the cleaner, as well as help reduce maintenance and cleaning costs.
Does the Dolphin E10 shut off automatically?
No, the Dolphin E10 does not shut off automatically. The Dolphin E10 is powered by a rechargeable lithium battery and requires manual shutoff. The device will switch to standby mode when not in use, but it must be manually shut off in order to completely power down the pool cleaner.
To turn the pool cleaner off, press and hold the power button for approximately 3 seconds until the remaining battery life is displayed on the LCD display.
How do you keep dolphin pool cleaner cord from tangling?
One of the best ways to keep your dolphin pool cleaner cord from tangling is to secure the cord using a cable tie or rope. To do this, start by securing the cable tie or rope to a stationary object near the edge of the pool.
Next, tie one end of the cord around the cable tie or rope, leaving a few feet of slack on either side. Finally, coil up the cord and secure it to the rope or cable tie with a few extra twists if needed.
This will ensure that the cord is kept properly stored and organized so it can’t get tangled. Additionally, when you’re done cleaning and need to store the cord away, you can promptly uncoil the cord, secure it to the object, and store the cord away for next time.
How do you use the e10 pool cleaner on dolphin?
To use the e10 pool cleaner on Dolphin, start by ensuring that the pool cleaner and Dolphin pool cleaner head and debris bag are properly connected. Once connected, submerge the head and bag into the bottom of the pool taking care to ensure both are positioned firmly in the pool and not on the side of the pool.
Connect the power supply cord to the body of the e10 pool cleaner and plug the cord into a nearby electrical outlet. Set the speed control to the desired setting and turn on the motor. The Dolphin e10 pool cleaner will then begin to navigate around the pool, cleaning up any debris that is on the bottom of the pool floor.
When the pool is completely cleaned, turn off the motor, unplug the power cord, and remove the debris bag from the cleaner head.
Why does my dolphin pool cleaner stopped working?
There could be several reasons why your dolphin pool cleaner stopped working. The most likely cause is an issue with its power supply, as the machine requires electricity to function properly. If the electrical cord is damaged or not connected correctly, this could be the reason the device is not working.
Other possible causes of your dolphin pool cleaner’s malfunction include a clogged filter, debris blocking the suction inlet, or a blockage in the hose. Inspect each of these components and carefully unclog or remove any obstructions you find.
Additionally, inadequate water flow could be a factor, as the device needs an adequate supply of water to maintain proper operation. Check for any kinks, tight bends, or blockages in the hose that could impede water flow.
If these are all clear and the unit is still not working, contact the manufacturer for troubleshooting advice or to arrange for a repair or replacement.
Who manufactures dolphin pool cleaner?
Dolphin Pool Cleaners are manufactured and distributed by Maytronics, a global leader in the pool cleaning robotic industry. Maytronics has been innovating pool cleaning robotic solutions since 1983.
Dolphin Robotic Pool Cleaners provide industry leading performance while allowing pool owners to reclaim time spent maintaining their pool. All Dolphin Pool Cleaners are equipped with superior cleaning technologies, including patented dual-level brushes, wall-climbing ability, and advanced navigation programs.
With a complete range of robotic pool cleaners designed to offer advanced pool cleaning technology to any pool size at an affordable price, Dolphin Pool Cleaners provide a reliable, energy-efficient solution.
Where are Maytronics made?
Maytronics is a global leader in the robotic pool cleaner industry, designing, engineering and manufacturing its products at its headquarters in Caesarea, Israel. Maytronics’ state-of-the-art facility spans 20,000 sq meters and houses all the technical design functions, engineering, research and development, and the resulting mass production.
All Maytronics robotic pool cleaners are made in Israel, and maintained to the highest quality standards. Every Maytronics product comes with the superior service the company has become known for. Special production lines have been created over the years according to customer demand and on average, more than 5,000 robotic pool cleaners are shipped from Maytronics each month.
Is Maytronics an Israeli company?
Yes, Maytronics is an Israeli company. Founded in 1983, the company is headquartered in Hod Hasharon, Israel, and focuses on the fields of robotics and automation. Maytronics designs and manufactures robotic pool cleaners, as well as algorithms and systems for commercial and domestic robotic cleaning and automation.
Maytronics is best known for Dolphin – its line of robotic pool cleaners, which are sold in over 60 countries worldwide. The company also develops other robot-based automation products, such as robotic vacuums, smart home systems, and product tracking solutions.
Additionally, Maytronics runs two divisions: the Innovation Division, which focuses on research and development of new products, and the Professional Division, which works with industrial customers to provide automation solutions.
Is it OK to leave Dolphin in pool?
Whether or not it is “OK” to leave a dolphin in a pool depends on the specifics of the situation. Dolphins are highly intelligent marine mammals that need a lot of social interaction, space to explore, and entertaining enrichment activities in order to thrive.
The pool would need to be large enough for the dolphin to be able to swim around freely, and it should be adequately maintained with the correct chemical balance and temperature of water. If a pool is small and lacking in interesting activities, the dolphin could become stressed or lethargic.
Additionally, the pool should have an area that is easily accessible for the dolphin to rest and interact with people if desired. If these conditions are met, then leaving a dolphin in a pool could potentially be suitable and safe.
How does a robotic pool cleaner know where to go?
Robotic pool cleaners are designed to navigate the pool floor, walls, and water line without human assistance. They are equipped with advanced onboard computers, digital sensors, and motors that help them stratify the pool and detect where to clean effectively.
The onboard computer will scan the pool and create a map of the pool, including features such as steps, ladders, and corners, as well as any obstacles. By using this information and data from the sensors, the robotic pool cleaner is able to determine the best cleaning patterns which allows the cleaner to drive itself around the pool surfaces covering all areas for cleaning.
The sensors on the robotic pool cleaner are able to detect changes in the environment and adjust the cleaning pattern to ensure complete coverage of the pool.
Does Dolphin pool cleaner disable automatically?
Dolphin pool cleaners are designed with self-navigating, energy-efficient cleaning cycles that allow them to operate without manual operation. The pool cleaner’s advanced software helps it to detect obstacles and navigate around them, as well as navigate the entire pool in an efficient, automated path.
This advanced software has the ability to control and adjust the settings, including the run time and turn off cycle, which when enabled, will cause the cleaner to complete the pool cleaning cycle and then turn off automatically.
This advanced technology allows pool owners to have peace of mind that their pool is being cleaned efficiently and consistently while they are away.
How do I pair my dolphin Bluetooth?
Pairing your Dolphin Bluetooth Device with a Bluetooth-enabled device is a fairly straightforward process. The steps below will help you get it up and running quickly.
1. Check that the Bluetooth-enabled device you want to pair with is in range (usually about 30 feet) and turned on.
2. Turn your Dolphin Bluetooth Device on.
3. Activate pairing mode on the Dolphin Bluetooth Device. You can do this by pressing and holding the power button for at least five seconds until the device turns on and starts to blink or flash.
4. Go to the Bluetooth Settings page on the device you want to pair with and ensure that it is set to scan for new devices.
5. Once the Dolphin Bluetooth Device shows up on the list of available devices, select it to start the pairing process.
6. If a PIN code or other authentication is required, enter the code or authentication details on both the Dolphin Bluetooth Device and your other device.
7. Once the pairing process is complete, the Dolphin Bluetooth Device should be connected and ready to use.
It’s important to note that the exact steps for pairing your Dolphin Bluetooth Device will vary depending on the device you are connecting to, so be sure to consult your device manual for specific instructions.
What setting should my pool filter be on to vacuum?
Your pool filter should be set on the “Recirculate” setting when vacuuming. When the filter is set to recirculate, the pool pump will be running while you are vacuuming, allowing the debris to be circulated through the filter and out of the pool.
It is important to keep your pool clean and free of debris, which is the primary purpose of vacuuming. Therefore, having your filter on the recirculate setting will ensure that the debris can be filtered out and not just remain swirling in the pool.
Additionally, running a filter while vacuuming allows for better suction as the pressure from the pump helps to draw the debris into the hose and ultimately out of the pool.