No, we do not recommend using bleach on your SILGRANIT sink. The strong chemicals in bleach can damage the surface of the sink, causing dull spots and discoloration. It can also damage the protective coating and leave your sink vulnerable to cracking and chipping.
Instead, we recommend using a mild detergent with warm water to clean your SILGRANIT sink. For a deeper clean and to remove soap, limescale, and mineral deposits, you can use a non-abrasive, liquid cleanser specifically formulated for granite and composite surfaces.
When using this cleaner, use a non-abrasive sponge or cloth and rinse with water after. Additionally, you can use a soft sponge with a thin layer of Bar Keepers Friend or vinegar to give your sink a brilliant shine.
Are SILGRANIT sinks easy to clean?
Yes, SILGRANIT sinks are very easy to clean. The patented material of these sinks consists of up to 80% natural quartz and acrylic, which makes them extremely hard and resistant to scratches and stains.
They are also non-porous, so there is no risk of bacteria or dirt building up inside. The non-porous surface also helps to repel water and any spills dry quickly and easily, making them much simpler to clean compared to other materials.
To help maintain the original beauty of your SILGRANIT sink, it’s recommended to regularly clean the surface with a soft cloth, warm soapy water, and non-abrasive cleaners.
Do SILGRANIT sinks scratch?
No, SILGRANIT sinks are highly resistant to scratching and other abrasions. SILGRANIT is an 80 percent granite material composed of natural quartz, acrylic resins and pigment, that gives it its exceptional strength and long-term durability.
With regular cleaning and minimal maintenance, SILGRANIT sinks look new for many years. The smooth surface means dirt and grime naturally slide off instead of getting stuck, and the glossy finish resists visible scratches.
Can you use Bar Keepers Friend on granite composite sinks?
Yes, Bar Keepers Friend is safe to use on granite composite sinks. This product has a unique formulation that enables it to gently and effectively clean most surfaces, including granite composite sinks, without causing any damage to the finish.
To use it, wet the sink and sprinkle a small amount of Bar Keepers Friend onto the damp surface. Apply light pressure and scrub the surface in a circular motion. Rinse thoroughly with warm water and wipe the surface dry with a soft cloth.
Depending on the condition of the sink, you may need to repeat the process, but keep in mind that Bar Keepers Friend is a mild abrasive. Therefore, it’s best to avoid overusing it in order to keep the sink looking like new.
Is BLANCO granite sink good?
BLANCO granite sinks are very good because they are durable, easy to clean, and come in a variety of colors and styles. Made from 80% granite, these sinks are extremely hard-wearing and scratch-resistant, making them an excellent choice for kitchens.
The non-porous surface does not allow germs or bacteria to breed, so it’s suitable for use in professional kitchens or for those who need tough, hygienic surfaces. You can customize your sink with a variety of colors and shapes to match the aesthetic of your kitchen, from granite composite to solid colors, or choose from single and double sinks.
The easy-to-clean features make it an excellent sink for busy households and kitchens. Finally, these sinks also come with a lifetime guarantee so you can be sure of their durability and quality.
How do you clean a BLANCO composite granite sink?
Cleaning a BLANCO composite granite sink is very important in order to maintain its function and beauty. To clean your sink, start by cleaning any debris from the sink, then scrubbing it with a soft dishcloth using a mixture of warm water and mild dish soap.
Once soap residue has been removed, rinse your sink thoroughly with clean water and dry it using a soft cloth.
If your sink has tough stains, try using a cleaning solution specifically designed for composite granite sinks, such as Blanco Composite Cleaner. Before starting, read the instructions and safety information on the label carefully.
Apply the cleaner with a soft cloth, back-and-forth in the same direction, working from the center out to the rim. Follow the instructions on the cleaner packaging, allowing the cleaner to soak in and lightly scrubbing it with a soft brush or non-metallic scrubbing pad.
Once all of the residue has been removed, rinse your sink thoroughly and dry with a soft cloth.
Be sure to avoid using any harsh or abrasive cleaners or scrubbing pads, as they can damage the surface of the sink. Also, carefully avoid metal scouring pads, steel wool, and abrasive sponges, as they can scratch the sink’s finish.
In addition, make sure to avoid bleaches, solvents, and any other abrasive cleaners not specifically designed for composite granite sinks. Finally, be sure to check for any instructions for additional cleaning and care from the manufacturer of the sink.
How do you remove stains from SILGRANIT?
Removing stains from SILGRANIT is fairly simple and straightforward. First, mix a solution of mild detergent and lukewarm water, and apply it on the area needing to be cleaned with a soft cloth or sponge.
For particularly stubborn stains, combine the soap solution with baking soda to make a paste and spread it over the surface, making sure to rub in a circular motion. Once you have applied the paste, wait for a few minutes before scrubbing it off with a soft brush or cloth.
Finally, rinse the area with warm water, and dry it with a clean cloth.
For tougher stains, such as wine, rust, or grease, a special cleaner made to remove tough stains from SILGRANIT should be used. Before using the cleaner, make sure to test it on an inconspicuous area to make sure that it does not damage the surface of your sink, and then apply the product to the stained area.
Use a plastic brush to rub the cleaner gently into the surface in circles, and then rinse well with warm water.
To prevent future stains from forming, be sure to wipe the surface of your SILGRANIT sink with a soft cloth and warm water after each use. If tougher staining occurs, the above methods should quickly and easily remove the grimy buildup.
Can you bleach Blanco sinks?
Yes, you can bleach Blanco sinks. The best approach is to use a non-abrasive cleaner and a soft cloth or sponge. Be sure to dilute the bleach before use according to the manufacturer’s instructions. Avoid using too much or the bleach may damage the sink.
Rinse thoroughly with cold water and dry the sink completely. Regular cleaning with bleach will help prevent the build-up of lime scale and maintain the original brightness of the sink. Also, avoid using scouring powder as it can scratch the surface and impact the appearance of the sink.
Can you use bleach on composite granite?
No, you should not use bleach when cleaning composite granite. Granite is a somewhat porous material that is sensitive to certain cleaners, and bleaching agents will damage a composite granite surface.
As an alternative, use a mild dish soap diluted in warm water, a vinegar-water mixture or a commercial cleaner specifically made for granite, marble and other similar surfaces. If using a commercial cleaner, make sure to read the instructions, as some require the use of a damp cloth for cleaning and drying.
Additionally, be sure to rinse the surface thoroughly after application, as products like ammonia and vinegar can cause discoloration, especially when the granite is exposed to direct sunlight.
Does Blanco SILGRANIT stain?
Yes, Blanco SILGRANIT can stain, but the level of staining depends on the type of material and the manner of care. Since Blanco SILGRANIT is a composite material, it is important to note that it is extremely resistant to staining, but not completely impervious.
For example, acidic foods, such as coffee and lemon juice, can etch and discolor the surface if left on for an extended period of time. To extend the life and beauty of the sink, periodic cleaning and sealing is recommended.
Blanco recommends that a high quality sealer be used to seal the sink every six to twelve months. This will greatly reduce staining and discoloration. When using the sink, substances such as bleach, paint, solvents and bath oils should not be left on the sink surface.
These can penetrate the material and cause staining and discoloration. With proper use and regular maintenance, your Blanco SILGRANIT sink will maintain its beautiful finish and color for a lifetime.
Is SILGRANIT the same as granite?
No, SILGRANIT is not the same as granite. SILGRANIT is a proprietary granite composite material made by BLANCO, a leading sink and faucet manufacturer. It is made from a blend of 80% solid granite and 20% acrylic polymer.
SILGRANIT is available in a variety of colors, provides resistance to scratches and heat, and is highly durable and non-porous, which makes it an ideal material for kitchen sinks, countertops, and other household appliances.
Granite, on the other hand, is a natural stone that is mined from quarries and then cut and installed. Granite is available in a variety of colors, is heat and scratch resistant, and is highly durable and non-porous.
However, since it is a natural stone, the color and pattern of each slab can vary if it is not properly sourced. Both granite and SILGRANIT are excellent materials to consider for any home renovation project.
Do BLANCO sinks stain easily?
No, BLANCO sinks are designed with a special SILGRANIT material which is made to resist staining. SILGRANIT material is a high-performance composite material with superior advantages in terms of strength, stain resistance, impact resistance and durability.
The composite material also has a low-porosity surface that won’t absorb liquids or food particles, making it much easier to keep clean. The material is also resistant to scratches, abrasion and chips, so you can be sure that your BLANCO sink will stay looking brand new for years to come.
What is the way to clean a SILGRANIT sink?
SILGRANIT sinks are incredibly durable, but like any sink, it is important to maintain your SILGRANIT sink properly in order to ensure its longevity. Fortunately, cleaning a SILGRANIT sink is very easy.
Here are some tips to help keep your SILGRANIT sink looking its best:
1. Start by wiping down the surface of the sink with a soft cloth and warm soapy water.
2. Stains or marks that don’t come off easily with warm soapy water can be further removed by using a non-abrasive cleaner such as baking soda or a mild detergent made specifically for granite and stone.
3. Use a soft cloth to gently scrub the area in a circular motion.
4. Rinse away the cleaner using clean, lukewarm water.
5. Dry the sink with a soft cloth to prevent water spots.
6. If the SILGRANIT sink has an additional coating, such as a polish, sealer or wax, use a non-abrasive cleaner specifically for this type of coating. This should be done about once every month.
7. Use lemon juice, vinegar, or a salt/baking soda combination to tackle stubborn spots.
8. After using the above steps and if your SILGRANIT sink is still not looking its best, then you can use a mild bleach solution to help restore the look of the sink.
Following the above steps will ensure your SILGRANIT sink looks good as new. For best results, it is recommended to clean your SILGRANIT sink on a regular basis to maintain its look.
Are white granite sinks easy to clean?
Yes, white granite sinks are generally easy to clean. Granite is a great choice for a sink because it is a naturally non-porous material that does not easily absorb bacteria or dirt. It is also resistant to most chemical cleaners and very durable.
The smooth surface is also easy to simply wipe down with a damp cloth. However, it is important to use mild soap and some serious scrubbing for tough stains, and it should never be scoured with any harsh abrasives that can scratch the surface.
Furthermore, white granite sinks require regular maintenance with a sealer to prevent staining and discoloration.