Yes, you can hand sew pillows. Depending on the type of pillows you are wanting to make, there are various methods you can use to hand sew them. You can start by cutting two pieces of fabric for the pillow, with each one being ¾ of an inch larger than the pillow form size.
Then you will need to pin the two fabrics together, ensuring that the prints or designs on each fabric face each other. Next, you will thread a hand sewing needle with the thread of your choice and tie a knot on the end to secure it.
Then you will start to sew the pillow together, starting from the outside and sewing in a small running stitch around the pillow. Once you come back to where you started, tie the two ends with a knot and remove the pins.
Finally, stuff the form into the pillow, and you’re all done.
What stitch do you use to sew a pillowcase?
When sewing a pillowcase, a straight stitch is typically used for the entire project. The straight stitch is the most basic of all the stitching options and can be done on a conventional sewing machine.
Depending on the fabric you are using and the look you are going for, you may want to use an overlock stitch, which will give the seams of your pillowcase a nice and finished look. However, if you are making a standard pillowcase, the straight stitch will suffice.
Before you start stitching, it is important that you prepare your fabric first. Make sure to press your fabric flat and straight before you begin sewing. You may also need to cut off any frayed edges and separate the pieces so they are ready to be stitched together properly.
Once your pieces are set and ready to go, start by stitching the two large rectangular pieces of fabric together, right sides facing one another. After the pieces are connected, sew the side seams. Sew the cuff of the pillowcase border and turn the pillowcase right-side-out.
Press the edges and finish the project with a top stitch along the edge.
How do you make a pillowcase without sewing?
Making a pillowcase without sewing can be a fun and cost-efficient DIY project if you’re short on time and supplies. First, you’ll need to find some materials that can be used to create your pillowcase.
This could include fabric glue, tight rubber bands, double-sided tape, scissors, fabric, and a ruler.
To begin, measure the length and width of your pillow and double the length and add 1-2 inches to the width. Cut your fabric to these measurements. Then, fold each side of the fabric inwards so that the right sides of the fabric are facing each other.
Secure the edges with tape, glue, or rubber bands.
Once your fabric is completely secured, carefully trim away any excess fabric. Finally, use a ruler and scissors to turn the raw edges of the fabric inwards and press them in place. You can use fabric glue or double-sided tape to secure the edges of the fabric, creating a clean, finished look.
Once everything is dry, you can insert your pillow into the pillowcase and enjoy your completed project.
Is it cheaper to make your own pillow cases?
The answer depends on the materials and supplies used to make the pillow cases. If you already have the necessary sewing material and basic sewing skills, then making your own pillow cases can be a relatively inexpensive option.
It may require some trial and error to find the perfect pattern and measurements, however, depending on the material used, a few hours of effort can yield several pillowcases that will last for years.
On the other hand, if you don’t have the supplies or the skill level to sew pillow cases from scratch, it will likely be cheaper to purchase them pre-made. Many stores, both in-person and online, sell inexpensive pillowcases in various sizes, textures, and colors, which may be the most cost-effective solution.
Which seam is used for pillow cases?
The Flat Fell Seam is the most commonly used seam for pillowcases. It is a strong, durable seam that eliminates bulk, and gives the pillowcase a professional, finished look. The Flat Fell Seam is created by overlapping one seam allowance on top of the other, and then stitching both layers together.
After this, the seam is then trimmed and the raw edges are then finished off with an over-lock stitch or a zig-zag stitch. This method gives the pillowcase a neat, finished look that is sure to last.
What is the size of a standard pillowcase?
A standard pillowcase typically measures 20 inches by 30 inches. The measurements are taken from the outer seam of the pillowcase and can vary slightly depending on the type of fabric and the manufacturer.
Pillowcases come in many shapes, sizes, and fabrics, so if you’re looking for something specific, it’s best to measure the size of your pillow and shop around for the right size pillowcase. For example, European-sized pillows (often referred to as Queen, King, or Super King) are larger than standard pillows and require a larger pillowcase.
How much fabric do I need for a standard pillowcase?
The amount of fabric needed for a standard pillowcase will largely depend on the size of your pillow and the size of your fabric. Generally, a standard pillowcase will require one yard or less of fabric, although it is possible to use more or less depending on the size of the fabric and the size of the pillow.
If the fabric is 44 to 45 inches in width, a yard of fabric should be enough for a standard size pillowcase. If the fabric is wider than 45 inches, or if you are using a decorative trim or lace that adds to the length of the case, then you may need more than a yard.
The finished pillowcase should measure about 20 inches wide and 40 inches long, so it is a good idea to add a few extra inches to the length of the fabric to allow for some extra coverage over the pillow.
How many yards does it take to make a queen size pillow case?
Depending on the size of the pillow, the amount of fabric required to make a queen size pillow case varies. Generally, a standard size pillow is approximately 20 inches wide and 28 inches long, which means you would need approximately 2 and 1/4 yards of 45-inch wide fabric to make a queen size pillow case.
This would be enough fabric to incorporate a 2-inch margin for the seam allowance and hems. If you decide to look for a larger pillow size, you would need a bit more fabric. For example, for a queen size pillow measuring up to 26 inches wide and 30 inches long, you would need approximately 2 and 3/4 yards of 45-inch wide fabric.