Yes, you can hang curtains inside the frame. For example, if you have a wooden window frame, you can attach rods to the inside of the frame which will create an area for the curtains to hang. This will allow you to hang the curtains between the top of the window frame and the top of the window to give the room a more complete look.
It will also make the window appear wider and add more dimension to the room. If you choose to hang the curtains this way, make sure you measure the inside of the window frame to ensure the curtains are the right size and avoid any potential overlapping.
If your window frame is too narrow to hang curtains, you can also hang a light-filtering fabric to help diffuse the light and soften the edges of the window frame.
Do curtains need to cover entire window?
No, curtains do not need to cover the entire window. Depending on the look you are trying to achieve, curtains can be hung so that they only partially cover the window or leave a gap between the window and the top of the curtains.
or they can be hung so that they pool on the floor, extending past the window. Depending on how much natural light you would like to let in, you can adjust how much of the window is covered. If you’d like more privacy, it’s best to cover the entire window, or entire wall for that matter, to get the most out of the curtains.
How far below a window should curtains hang?
The ideal length for curtains depends on the size and style of window you have, as well as the look you’re hoping to achieve. For the most decorative and flattering look, curtains should hang at least 6 to 8 inches below the window frame, allowing for a pool of fabric at the bottom to gather for a beautiful draping effect.
To create a sleek, modern look, hang the curtains at least 1/2 inch below the window frame or, if that is too short, they can be hung almost to the floor. For a traditional, polished look, hang them 1 to 2 inches below the bottom of the frame.
How far should curtains extend past window?
The length of curtains varies depending on personal preference and the look you’re trying to achieve. Generally speaking, curtains should extend at least 6 inches past each side of a window – 12 inches total.
However, if the window is particularly wide, it’s a good idea to add additional length to the curtains to make the window look balanced and proportionate. The additional length can be up to 20 inches on each side of the window.
It’s also recommended to extend the curtains a couple of inches below the window sill for a more complete and finished look. When it comes to curtains, achieving the right balance and proportion is key, so adjusting the length of your curtains accordingly may be necessary.
Do curtain rods go on trim or wall?
That depends on what kind of curtain rod you are installing. For interior window treatments, typically, curtain rods install either on the wall or on the trim. If you’re installing a lightweight rod, a tension rod, or a spring-loaded rod, it is best to install them on the trim in order to prevent the rod from bowing and to provide support for the weight of the curtains.
If you have heavier curtains, or double curtains, then you will need to install the rod on the wall to evenly distribute the weight. In addition, if you are hanging curtains in a doorway, then it is better to install the rods on the wall.
When installing the rod, make sure to use the appropriate hardware for either wall or trim installation.
Where should a curtain rod be placed?
Where to place a curtain rod depends on a few things, such as the size of the window, the length of the curtains, and the desired look. Generally, it is recommended to mount the rod 4 to 6 inches above the window frame.
As an example, if the curtains are to pool on the floor, the rod should be high enough that the panels are slightly high on the wall and have a good amount of extra material towards the floor.
If the curtains are meant to hang between the window and sill, the rod should be mounted at the same height as the window sill or slightly above. This will ensure easy access to the window when opening and closing.
If only one panel is being used or the fabric is sheer, the rod should be placed 2 to 4 inches below the top of the window.
If there is no window frame, an alternative mounting technique is to install the rod several inches above the desired resting point for the top of the curtains. The rod should then extend several inches on either side of the window space, ensuring a symmetrical look.
In this case, the brackets should be mounted in a stud rather than drywall to ensure that the rod is securely mounted.
How do you hang curtains when the window is at the top of the wall?
Hanging curtains when the window is at the top of the wall can be tricky. Generally, the best way to do this is to first check if the window has integral brackets or openings that the curtain rod can fit into.
If the window has these, then the rod or pole can simply be fixed into place. If not, then the installation of a suitable wall bracket or mount that is capable of supporting the weight of the curtains is recommended.
When choosing a mount, check the manufacturer’s installation instructions to ensure that it is suitable for the wall surface you wish to mount it on. Before installing the mount, measure the width of the window and the length of the curtain you wish to hang so that you install the mount in the correct place.
Once the mount has been securely fixed in place, you can then add a curtain rod or pole, taking care to ensure that it is securely in place. Finally, you can hang your curtains ensuring that they are hung correctly and levelly.
How wide should you mount curtains?
The width you should mount your curtains on depends on the size and style of window you want to cover. Start by measuring the length and width of your window to determine how much fabric you’ll need.
Usually, curtains should be at least 2-3 times the width of the window they cover, depending on how full and dramatic you want them to be. This will give the curtains a nice, full look and make sure they cover the whole window.
For a standard two-over-two window, you will want to measure each panel in the pair separately. Measure the full width of the window and add the double the desired fullness. This will give the curtain panel a lush and full appearance once mounted.
It’s important to also measure for the length. You don’t want to have curtains that hang too far past the window frame, so ensure you measure to the desired length. For maximum coverage, you can mount the curtains one to two inches higher than the window frame.
This will give you slightly more coverage, helping the curtains look a bit fuller.
How much wider should curtains be than the rod?
The exact amount of width needed for your curtains will depend on the style of curtains you select. For a gathered or full pleat look, your curtains should be at least double the width of the rod in order to create fullness and drape.
For a rod pocket top, you will need the curtains to be at least 1.5 times the width of the rod, so that when you pull the rod pocket over the rod the curtains will drape nicely. For a tab-top or grommet style, you will need the curtains to be at least 1.
25 times the width of the rod, to ensure that the tabs or grommets will make contact with the rod when hung. In all cases, make sure the curtains are wide enough to completely cover the window or the area you are trying to cover, as well as properly frame the window or space.
How do you measure for interior mount curtains?
Measuring for interior mount curtains requires accurate measurements to ensure that the curtains properly fit the window. First, use a steel measuring tape to measure the exact width and length of the window opening.
If the window has a sill or border trim, add 1/2-inch to each measurement to allow for the trim. To measure for length, begin at the top of the window and measure from the top edge down to within 2 inches above the floor.
Keep in mind that curtains usually hang from the ceiling or just below the crown molding, not above the window frame. To measure width, measure starting from one side molding and extending to the other side molding.
Once you have the measurements, choose a curtain size slightly larger than the window opening. This will ensure the curtains properly cover the window.
What size curtains do I need for a 240cm window?
The size of curtains you need for a 240cm window will depend on the amount of fabric gathering you prefer. Generally, you should add 10cm to 20cm to each side of the window to get a full, gathered curtain look.
This means you should look for curtains that are 260cm to 270cm wide. If you prefer a more tailored look, you should measure the width between the finials (the decorative pieces on top of the curtain rod) and add 10cm to each side.
Then select curtains that match this width. If you’re hanging the curtains rods close to the ceiling, then you should look for curtains that are 5cm-7.5cm longer. This will prevent the curtains from dragging on the floor.
For the length, the most common length is to the floor (1cm above to be exact). However, you can choose a length that follows the window’s proportions. For instance, if your window height is 240cm, then look for curtains that are approximately 150cm in length to create a balanced look that is proportional to the window.
How much overhang do you need for curtains?
The amount of overhang necessary for curtains will depend on a few factors, including the room’s size, the overall look you are trying to achieve, and the type of curtains you are using. Generally, you should aim for at least four to six inches of overhang on either side and up to 15 inches at the top.
For larger rooms, you may want to opt for a greater amount of overhang. This would create a more elegant and luxurious look, as it will appear as though the curtains are pooling or cascading onto the floor.
You should also keep in mind that the size of your curtain rod will also be a factor, as you don’t want to overhang the curtains if it covers too much of the wall.
If you are hanging curtains on a window that is larger than the length and width of your curtains, you may want to consider adding additional fabric or gathering the middle of the curtains to create a more full look.
In terms of types of curtains, sheer curtains usually require less overhang, as their light and airy look looks best when it only slightly hangs over the sides of the window. Heavier fabrics, such as velvet, may require more overhang to give the window a more glamorous or formal look.
Ultimately, depending on your preferences and the look you are trying to create, the amount of overhang you need for curtains will vary.
Do eyelet curtains need to be double width?
No, eyelet curtains do not need to be double width. The size of the curtains depends on the size of the window and the amount of coverage desired for the window. If you want more coverage, it is recommended to get curtains that are wider than the window frame.
Although some people opt for double width eyelet curtains, it isn’t a requirement. If you are purchasing a single width eyelet curtain, you may want to consider using multiple curtains on the same window frame to get more coverage and a layered look.
You can also combine the eyelet curtain with other treatments, such as blinds, sheers or valances. Ultimately, the size and type of window treatment needed depends on the size and function of the window, as well as personal preference.
Is drywall strong enough to hold curtains?
Yes, drywall is strong enough to hold curtains, but it really depends on the weight of the curtains and type of hardware being used. The drywall itself should be able to easily take the weight of lightweight curtains and most small decorative curtain rods.
You always want to make sure to use drywall anchors or screws that are rated for the weight of the curtains and rods, as well as organizing them properly so that the weight is distributed evenly. If you have heavier curtains, it is best to use a stud or a concrete wall if possible.
Studs have a better tensile strength than drywall and are better able to handle the weight of curtains. If you must use drywall, you can use a stronger type of wall anchor, such as the toggle bolt, which can handle up to 80 pounds.
Do you always need drywall anchors?
No, you don’t always need drywall anchors. In many cases, you can use other methods to hang shelves and other wall hangings, depending on the size and weight of the object you wish to hang. For example, nails or screws in the studs behind the wall can be used to hang items up to 30 pounds, while adhesive-backed hooks and hangers can be used for items up to 8 pounds.
When the item is heavier than that, drywall anchors are typically used. Drywall anchors are inserted into the drywall to create an anchor point that supports the weight of the item better than the drywall itself.
When using drywall anchors, it’s important to choose the proper anchor for the weight of the item as well as for the material of the walls (plaster or drywall).
How can I hang curtains without studs?
If you do not have access to studs to hang your curtains, you can still hang them without the need for major support. Depending on the weight of your curtains and material of the wall.
Command Hooks: A light option is to useCommand hooks or removable adhesive hooks on the wall. Command hooks are an easy and safe way to hang lightweight curtains without studs. Just make sure the appropriate size and weight of command hooks is used!.
To install a Command hook, start by wiping down the wall with a cloth to remove any dirt or dust. Next, peel off the tab of the command strip, position the hook on the wall, and press firmly for 30 seconds.
If the hooks are not sticking to the wall securely enough, use a piece of painters tape over the top of the hook to help keep it in place.
L brackets: For medium-weight curtains, consider installing L-brackets on each side of the window. This is a great way to hang curtains without the need for studs. Start by measuring the width of the window and then mark the exact bracket placement with a pencil and level.
Drill the brackets into the wall and then insert the curtain rod into the brackets. Make sure the brackets are in a secure place to prevent slipping or sliding.
Screws and Drywall Anchors: For heavy curtains, you will need to use screws and drywall anchors. Start by using a level to mark the placement of the curtain rod on the wall. Use a drill to insert the anchor screws into the wall, then gently insert the curtain rod onto the screws.
Once the rod is secure, hang your curtains, and enjoy the added privacy to your home!.
Do I need a drill to install curtain rods?
It depends on the type of curtain rods that you are installing. Most curtain rods simply need to be threaded into the wall, so you would likely not need a drill. However, if you are installing curtain rods that require screws, then you might need a drill.
If you plan on mounting the rods on the outside of your window frame, you will likely need a drill and screws as that requires some more complex installation than a typical curtain rod. Additionally, many curtain rods come with the necessary drills and screws included.
So, it is best to check the instructions for the specific curtain rod that you are using to determine the exact installation requirements.
How do you drill a wall for curtains?
Drilling a wall for curtains typically requires some basic tools and a bit of time and patience. Here are the steps for drilling into a wall for curtains:
1. Gather the required tools: an electric drill, a masonry drill bit, level and screws suitable for the wall type.
2. Select the appropriate drill bit size, taking into account the size of the screws that will be used.
3. Determine the desired placement of the curtains, then mark the wall as needed.
4. Use a level to ensure the two or more points that you’ll be drilling into are aligned correctly and straight, and make any adjustments necessary.
5. Position the drill bit at the first point and start drilling.
6. If necessary, adjust the drill bit’s position and continue drilling.
7. Drill the second hole at the desired position, and insert the first screw.
8. Repeat for the other sides of the curtains and any other pieces needed, such as curtain rods.
9. Double-check all drill holes, screws and pieces to ensure a secure fit and no gaps.
10. Hang the curtains and enjoy!
How do you find a stud to hang a curtain rod?
Finding a stud to hang a curtain rod can be a challenge, but there are a few steps you can take to make sure you hit the right spot. First, use a stud finder to determine the location and size of the stud.
Look up the manufacturer’s instructions to determine how far away the stud needs to be from the desired area of the wall, as sometimes one may be close enough to use. After locating the area of the wall, use a hammer and a long nail to make a small hole, which should reveal if a stud is indeed there.
Depending on the material of your wall, you may or may not get a good indication of what is behind the wall. If you don’t get a good indication, you can use an electronic stud finder to locate the stud more accurately.
If one is still unable to locate the stud, use an electronic stud finder and look for drywall screws that may indicate wallboard above the framing. Once you have located the stud, use the appropriate hardware for the size and type of wall to mount your curtain rod.