No, unfortunately it is not possible to put an 18-inch bar on a 14-inch chainsaw as the bar and chain must be the same length, and compatible with the chainsaw. Chainsaw bars come in a range of sizes, but the bar must be of equal length with the chain, which will be stated in the chainsaw’s operating manual.
Additionally, you should choose the bar length that is recommended for your chainsaw’s engine size and model number, as using a bar of different length can cause the chainsaw to become unbalanced and be difficult to use.
If you have an 18-inch bar that you would like to use, you should look for a chainsaw with an 18-inch bar and chain.
Is a longer bar better on a chainsaw?
In general, a longer bar on a chainsaw is better when cutting large pieces of wood. A longer bar gives the chainsaw more reach and stability, allowing it to cut deeper into the wood with greater accuracy.
Longer bars are also better for precision cutting, since they allow for more control over the cutting depth. Additionally, a longer bar can help with cutting thicker pieces of wood, as the extra length allows for a more even cut.
The only downside to a longer bar is that it can be more difficult to maneuver and may require more muscle power. Longer bars are also more susceptible to wear over time due to the increased friction from the chain running along the length of the bar.
However, if you’re cutting large pieces of wood, then a longer bar is usually the best option.
Can you shorten a chainsaw bar?
Yes, you can shorten a chainsaw bar. The process for doing so depends on the type of bar and chainsaw you have. It is important to first consult the manual your chainsaw came with to ensure any special instructions or tools will be required to safely shorten the bar.
Most chainsaws have a bar that can be easily removed and replaced with a shorter bar if desired. To shorten the bar, a hacksaw may be used to cut off the excess length. If a hacksaw is used, be sure to wear safety glasses and use a clamp to hold the bar in place while cutting.
Once the desired length has been achieved, handle the edges of the bar to remove any sharp edges and then reattach the bar and chain to the chainsaw. Be sure to double check all nuts, bolts, and clamps are securely fastened before use.
Whats the biggest bar you can put on a STIHL 881?
The biggest bar that you can put on a STIHL 881 is a 25 inch bar. This should be used with the 72.5 cc power head, and it is the largest permissible size that can be used with the unit. It is recommended for heavier applications such as felling large trees, bucking logs, and harvesting firewood.
It should be noted that a 25 inch bar is a significant upgrade from the stock 20 inch bar. A larger bar will increase the power head’s cutting performance by increasing the bite area and allowing for better leverage and control when making cuts.
It should also be noted that an appropriate chainsaw chain type and size should also be used when running the large bar to ensure that cutting performance is safely maintained.
How big of a bar can you put on a 661 STIHL?
The size of bar you can use on a 661 STIHL chain saw depends on the model and style. Generally, these saws are designed for mid-sized projects, so you can usually put a bar size between 12 and 23 inches in length.
Make sure to consult your owner’s manual or contact STIHL directly to make sure the bar you want to use is compatible with your specific model. Additionally, you may want to consider the power of the motor to ensure the bar size you choose is capable of handling the projects you are attempting to do.
Does chainsaw bar length matter?
Yes, the length of a chainsaw bar definitely matters. The length of your chainsaw bar will determine the size of your cutting capacity, and the amount of power required to handle the job. A chainsaw bar that is too short will limit the amount of timber that can be cut in a single pass, while a bar that is too long can add to the drag you’ll get from the weight of the saw, making cutting difficult and slow.
In general, the longer your saw bar, the larger diameter logs you can cut. Generally speaking, a chainsaw with a bar length in the range of 16-24 inches is appropriate for most residential use. However, different types of jobs will require different bar lengths.
For example, if you’re cutting logs that are over 24 inches in diameter, you’ll need a chainsaw bar that is 28 inches or longer. The longer the bar, the more power you will need to make the cuts. Ultimately, the best way to determine the right chainsaw bar length for your job is to consider the type of work you’ll be doing, the size of logs you’ll be cutting and the power of the chainsaw you’re using.
How big of a tree can a 16 inch chainsaw cut?
It depends on several factors, such as what type of wood the tree is made of and its overall size. Generally speaking, most 16-inch chainsaw models have enough power to cut trees with a diameter of up to 18-20 inches, but this number could be even higher if the tree is made of a softer wood.
If the tree is larger than 20 inches, a larger chainsaw model will likely be required. To make sure you’re using the right size saw, it’s best to look at the manufacturer’s recommendations and choose a model that can easily handle the size of the tree you’re dealing with.
Is a shorter chainsaw bar better?
Generally speaking, the answer will depend on the job you’re using the chainsaw for. For instance, if you’re cutting logs that are relatively thin and small, a shorter chainsaw bar would likely be the best option.
This is due to the shorter bar being easier to maneuver, as well as minimizing the risk of kickbacks. On the other hand, if you’re cutting logs that are thick and large, then a longer chainsaw bar would have the advantage.
This is because the longer bar gives you more leverage and cutting power. As a general rule of thumb, if your job requires you to cut into or through something, a longer bar will usually be more effective.
However, for jobs that only require you to make a shallow cut or trim, a shorter bar might be better. Ultimately, the decision of which bar length to choose will depend on the type of job you’re doing and the size of the material you’re cutting.
What size bar can you put on a Stihl ms170?
The Stihl MS170 can accommodate a 12-inch, 3/8-inch Pitch,. 050-inch Gauge PowerSharp chainsaw bar. This bar is specifically designed to work with the MS170, and helps to ensure optimal cutting performance.
It features Stihl’s built-in sharpener, which allows the operator to quickly and accurately sharpen the chainsaw. It also comes with a precision-ground, chrome-molybdenum steel bar and guard that are designed to last longer than traditional bars and guards.
This bar and guard is resistant to wear and tear, and has been proven in thousands of tests to provide consistent performance. Additionally, the PowerSharp Chainsaw Bar is lightweight and well balanced, making it easier to maneuver, even for extended periods of time.
How do you know if a bar will fit my chainsaw?
When trying to determine if a bar will fit a chainsaw, it’s important to look at the specifications of both the bar and the chainsaw. Generally, this information can be found on the manufacturer’s website or manual.
The bar should list the pitch, gauge and length. Pitch is the distance between the drive links of the chain and the gauge is the thickness of the drive link. The bar should also list the make and model of the saw it fits.
The chainsaw should list the make and model, as well as the size of the bar it takes. It is also important to make sure both the bar and chainsaw are designed for the same purpose (for example, both for wood-cutting and not cutting metal).
Once you determine that the bar and chainsaw have the same size, make and model, then the bar should properly fit the chainsaw. It is also important to check that the bar clearance is equal to or better than what is specified by the chainsaw manufacturer.
If the bar clearance is too large, it could cause serious damage to the chainsaw.
Are chainsaw bars and chains universal?
No, chainsaw bars and chains are not universal. While there are some similarities between chainsaw bars and chains, they are not completely interchangeable between different models and brands. The size of the chainsaw bar, pitch of the chain, and the gauge of the drive links are all factors that need to be taken into account when determining which bar and chain will fit properly on a particular model.
Before purchasing a bar and chain for a chainsaw, be sure to check the manufacturer’s recommended specs to avoid incompatibility issues. Additionally, be aware that some saw chains can be sharpened with a file, while others cannot.
Also, some chains may require special tools for removing and re-securing the chain on the saw.