Yes, you can use a piston to move obsidian blocks. Obsidian is a strong block in Minecraft that is found in the Nether and is made when a water and lava block interact. It is one of the few blocks that requires the use of an enchanted diamond pickaxe to break and therefore is one of the most difficult blocks to move.
Pistons are a very efficient tool for moving obsidian and can be used to push and pull the block from its place. To get the obsidian to move, however, you first must place a block of redstone dust two blocks away from it.
Once the redstone dust is in place, you then can place the piston next to the obsidian and it will power the block and move it accordingly. This is a reliable and efficient way to move obsidian blocks.
Can you move crying obsidian with a piston?
No, crying obsidian cannot be moved with a piston. Crying obsidian is an experimental block that was introduced in the 1.17 Caves and Cliffs Update of Minecraft. It is a special form of obsidian, which is a naturally-occurring block generated in large quantities at the bottom of the ocean.
Crying Obsidian has a special property of radiating redstone signals when moved by any form of pistons. Due to this property it is impossible for a piston to move Crying Obsidian as it would cause a redstone signal to be created and the game will not allow it.
How do you make pistons move?
Pistons move by converting force into motion via mechanical action. Most pistons are connected to a crankshaft and use either hydraulic pressure or a combination of hydraulic and mechanical force to convert rotational energy into linear movement.
A piston is typically made up of a piston head, cylinder, and two piston Rings. The piston head is connected to a crank mechanism which is used to move the piston back and forth inside the cylinder.
When the crank mechanism is turned, the piston applies pressure on the cylinder walls, pushing them outward and creating a vacuum. This vacuum is then filled with the fuel associated with the combustion process such as gasoline, diesel, natural gas, or compressed air.
The fuel is ignited, and the released flame and hot gases push the piston head back and forth inside its cylinder, producing piston motion. As the piston head moves up and down, the crankshaft is moved and this causes rotation, which allows for power to be generated.
The heat associated with the combustion process is expelled through the exhaust system.
What blocks can a piston not move?
Pistons are able to move most blocks in the game, but there are some blocks they cannot move. These blocks are obsidian, command blocks, end portal frames, barrier blocks, and structure void blocks. Additionally, some additional blocks cannot be moved by pistons, such as ladders, item frames, end rods, signposts, and armor stands.
If a piston attempts to move one of these blocks, it will simply bounce off it without pushing or pulling it. Finally, pistons cannot move blocks that require no physics, such as beacon bases, as well as appropriately weighted mob heads, certain plants, and other blocks that use the no-physics physics.
What is the hardest block a piston can push?
The hardest block a piston can push is subject to a variety of factors and is ultimately dependent on what you are trying to accomplish. Generally, the harder a block is, the more difficult it is for a piston to move it.
For example, bedrock is the hardest block but also the most difficult for a piston to push. Similarly, Obsidian is also very hard and more difficult to push than other blocks. On the other hand, sand and gravel are not as hard, but they are more difficult to move than blocks like dirt and cobblestone.
In addition, blocks with slabs and stairs can be more difficult to move than the base blocks.
At the end of the day, the actual hardest block a piston can push depends on what is being attempted. Factors such as block size, orientation, and quantity can all play a role in which block is the hardest to push.
Furthermore, pistons may have difficulty with certain blocks due to their strength and placement. As such, trial and error can be the best way to find out what the hardest block is for a particular situation.
What can move obsidian?
Obsidian is a type of natural glass formed by volcanic activity and can be extremely sharp. Due to its glass-like composition, it is difficult to move or manipulate in its solid form and can easily fracture if handled improperly.
As such, it is best to use special tools and techniques when handling obsidian. Depending on the form of the obsidian and the desired end result, the most recommended tool to use is an industrial diamond-tipped saw blade.
Additionally, special cutting and grinding machines can be used to shape the material into its desired shape, however, it is recommended that a professional be consulted if this is the desired approach.
It is also important to ensure that appropriate safety gear is used when handling obsidian, as the shards of glass have the potential to cause serious injury.
What are the strongest blocks in Minecraft?
The strongest blocks in Minecraft are blast-resistant blocks, which include bedrock, obsidian, anvils, and enchanting tables. Bedrock is the strongest block in the game, as it is impenetrable, indestructible and cannot be mined or broken.
Obsidian is also extremely strong and requires a diamond pickaxe to be mined, making it the second strongest block in the game. Anvils are slightly weaker than obsidian, but they are highly resistant to TNT and other explosions and can be used to repair items.
Enchanting tables are also prone to explosions, but their resistance is slightly weaker than that of anvils. With these blocks, players can create bases and fortresses that are highly resilient and capable of withstanding hostile mobs and the environment.
What blocks work with sticky pistons?
Sticky pistons can work with any type of block. The most common block used with sticky pistons are either wooden blocks or cobblestone blocks. Sticky pistons can also work with sand, gravel, soul sand and other blocks.
Additionally, observers and redstone blocks are great for sticky pistons when being used for automation purposes. Sticky pistons can also work with some blocks that could pull multiple blocks such as fences, stairs, slabs and even items such as chests, trapped chests and hoppers.
Can a sticky piston move a slime block?
Yes, a sticky piston can move a slime block. Sticky pistons can grip and pull blocks when extended. When the sticky piston is retracted, it will also pull the blocks it is attached to back. Slime blocks are no exception, and can easily be moved with a sticky piston.
When multiple sticky pistons are used, they can even be used to push and pull a slime block in multiple directions at once to create more complex movements. When attached to a slime block, sticky pistons can open and close doors, act as elevators, or even be used for other types of mechanized movement.
What blocks are immovable in Minecraft?
In Minecraft, there are various different blocks that are considered immovable. Examples of these include bedrock, which appears at the bottom of every Minecraft world and cannot be broken or moved; cobblestone, which cannot be moved, unless broken down and then rebuilt; and stone, which is also immovable unless it is broken down into smaller pieces in order to be moved.
Furthermore, slabs, such as those crafted with stone or wooden planks, are also considered immovable blocks. Finally, some blocks have the ability to be moved, such as sand and gravel, but this only occurs when an external force, such as an explosion, interacts with the block, causing it to be moved.
Are honey blocks the same as slime blocks?
No, honey blocks are not the same as slime blocks. Honey blocks were added in the 1.15.2 update, while slime blocks were added in 1.8. Honey blocks behave similarly to slime blocks in that they are able to produce a bouncing effect when stood on and can be used to make Flying Machines.
The main difference between the two blocks is that honey blocks have a lot of friction which makes them difficult to move, whereas slime blocks can be easily moved with pistons or slime magnets. This can make it difficult to move an object along the top of a honey block, as the friction will prevent it from sliding.
Additionally, honey blocks will flow and spread naturally, while slime blocks will not.
How do you make a moving piston in Minecraft?
Making a moving piston in Minecraft is relatively straightforward, but it does require some knowledge of Redstone. Redstone is a type of virtual circuitry used to power various machines in the game, and it is necessary for making a moving piston.
To begin, you’ll need to create a Redstone circuit powered by a two-slab button. Connect the button to a redstone repeater, which will act as a timer for your piston. The repeater should be wired to the side of your piston, and the piston itself should be facing the block that you want it to move.
Next, use Redstone again to connect a Redstone lamp and a Redstone dust circuit to your piston. The Redstone lamp will power the piston, and the Redstone dust circuit will activate it. Remember to ensure the circuit is properly wired and correctly set up for the piston to move.
Once your circuit is ready, place a block of Redstone between the piston and the block it is moving. To activate the piston, power the Redstone dust circuit with a Redstone torch. The Redstone torch will turn the Redstone lamp on, which will power the piston.
The block of Redstone will then receive the signal and initiate the piston’s movement.
And that’s all there is to it! With a bit of Redstone know-how, you can easily create a moving piston in Minecraft.
Can you stick two blocks together in Minecraft?
Yes, you can stick two blocks together in Minecraft. The process is fairly simple and should only take a few moments of your time depending on what type of block you are trying to stick together. To stick two blocks together, you will first need to use the “Right-click” action on the block you want to attach.
Then, you will need to use the “Left-click” action on the block you want to attach to, and the two blocks should stick together. Depending on the type of block, the blocks may also need to be placed next to each other in order to successfully adhere to one another.
For example, if you are trying to attach two types of wood blocks, you will first need to make sure that the grain overlaps, so that the two blocks can properly fit together.
Can furnaces be moved by pistons in bedrock?
No, unfortunately, furnaces cannot be moved by pistons in Bedrock Edition. Pistons are capable of pushing some blocks, such as sand, gravel and mobs, but not blocks like furnaces. Although furnaces cannot be moved by pistons in Bedrock, you still have other options.
For example, you can fill the area around the furnace with blocks, then break the furnace and the blocks, then place the furnace in its new spot. You can also use a block-moving machine to move the furnace, such as the ‘Block Breaker’ which you can construct by following a tutorial online.
Another option is to build your own machine which can move a furnace, but this is a more technical approach and requires more time, money and effort. Ultimately, it is not possible to move a furnace with pistons in Bedrock, but you have other options which may be more suitable for your needs.
Can pistons move Shulker boxes?
No, pistons cannot move Shulker boxes. Shulker boxes are containers that store items, which means they act as block entities unlike items like minecarts and other blocks which can be moved by pistons.
The blocks and items in the Shulker box are pushed with the box, while not the box itself. Because of this, they cannot be moved by pistons.