Yes, DEWALT does make a 10-inch table saw. The model is the DEWALT 10-Inch Jobsite Table Saw with Rolling Stand, DW745. This powerful saw has 15 amp motor and 4,800 RPM that is capable of cutting through hardwoods and pressure-treated lumber.
It is designed with a large 20-inch x 26-inch table surface, as well as a 2-1/2 inch dust collection port, ensuring an effective, efficient cutting experience. The rolling stand allows users to easily move the saw around their worksite without needing to lift it.
The stand also supports material up to 25 inches and the saw is compatible with many DEWALT accessories, such as the DWE74911 rolling stand, DWE7490X saw guard and others.
What are the dimensions of a DEWALT table saw?
The dimensions of the DEWALT table saw depend on the model. However, the most common DEWALT table saw has a 27-inch by 20-inch table top and is 12 inches deep. It stands 32 inches tall, with the motor housing extending 7 3/8 inches below the table top.
It has a maximum depth of cut of 3 1/8 inches at 90 degrees and 2 1/4 inches at 45 degrees. It has a blade diameter of 10 inches and is powered by a 15A 4500 rpm motor. It weighs in at just above 50 pounds, making it light enough to move around a shop or jobsite.
What is a mini table saw used for?
A mini table saw is a small, portable table saw that is used for a variety of different woodworking projects. They are designed to provide a more precise cut than a handheld circular saw and are ideal for small spaces.
Mini table saws usually feature a blade guard, blade stabilizer, and a miter gauge. They are perfect for cutting sheet goods such as plywood and thin veneers, creating crosscuts and miters, cutting dadoes, making lap joints, and more.
Mini table saws are also perfect for creating rabbets, rip cuts, and moldings, cutting small dovetails, and cutting thin strips of wood with precision accuracy. They are suitable for both professionals and hobbyists with a wide range of projects.
What can you not do on a table saw?
You should not try to cut material that is too large for the cutting capacity of the saw, use blades that are not sized correctly for the saw, and attempt to cut any material that exceeds the thickness or type listed in the saw’s operational manual.
Additionally, you should not use the saw to cut any material that you are not familiar with. You should also not make freehand cuts with a table saw; instead, always use a miter gauge and a rip fence to ensure an accurate, safe cut.
Furthermore, never use a table saw before making necessary safety checks and adjustments, like making sure the rip fence is parallel to the blade or that the blade guard is properly in place. Finally, always make sure that the saw is unplugged when it’s not in use and when performing maintenance or installing a new blade.
How much space do you need around a table saw?
When working with a table saw, it is important to make sure that there is a safe working area around it. A minimum clearance of 1 meter (or 3 feet) is recommended on all sides of the saw, and even more space if you plan to make long cuts.
This will allow you to move around safely and be clear of any hazards. Additionally, you should ensure that the table saw has at least 3 meters (or 10 feet) of space in front of it, as this will allow you to make long cross cuts.
Finally, it is essential to make sure that the area around the saw is free from any flammable materials, such as sawdust. This will help ensure that the saw operates safely and that any potential accidents are avoided.
What’s the difference between a table saw and a miter saw?
A table saw and miter saw are both essential power tools for woodworking and home construction projects, however they are used for different purposes.
A table saw is designed to rip boards or cut them to length. It is typically used to cut long lengths of wood, such as eight foot boards, at an angle. It consists of a circular saw blade that is mounted on a table with a rip fence, miter gauge, and other attachments.
Table saws are generally more powerful than miter saws and provide greater accuracy.
A miter saw is used to make precise cross-cuts on pieces of wood. It is composed of a circular saw blade mounted to a swing arm for making controlled and accurate cuts. Miter saws are ideal for cutting crown molding, door jambs, and other trim items that require precise angles.
Unlike a table saw, miter saws are not used to rip boards.
In summary, a table saw is used to make long rip cuts, while a miter saw is used to make precise cross-cuts.
How thick of wood can a 10 table saw cut?
The thickness of wood that a table saw can cut depends on the size and power of the motor, the size of the blade, and the type of material being cut. Generally speaking, a 10” table saw equipped with a standard 10” blade should be able to cut materials up to about 2.5” thick.
However, if you opt for a more powerful motor, a larger blade size, or upgrade to a higher tooth count sawblade specific to the material being cut, the maximum thickness should increase. Additionally, the use of appropriate jigs and featherboards can help increase accuracy and stability when making cuts through thicker materials.
How deep will a 10-inch saw blade cut?
A 10-inch saw blade is typically capable of cutting to a depth of 3 1/2 inches, depending on the type of saw it is used in. If a table saw is used with a dado blade, the depth can increase to 12 inches.
If a circular saw is used with a 10-inch blade and the saw is set to a 45-degree bevel angle, the cutting depth is 2 7/8 inches. For additional accuracy, it is recommended that a guide rail or clamp be used to ensure that the blade does not wander or move during the cutting process.
If a 10-inch blade is not suitable for the cutting task at hand, blades of different sizes are available that are capable of making deeper cuts.
What size table saw blade is best?
The size of table saw blade you should use depends on the specific project you are working on, as each size can offer different benefits. Generally speaking, a 10 inch table saw blade is considered to be the most popular, as it is large enough to fit larger pieces of material, while still being lightweight and easy to maneuver.
Additionally, 10 inch blades typically offer a wide selection of tooth sizes and materials, allowing you to chose the most suitable option based on your project requirements. However, it is important to keep in mind that larger blades can also offer an increased cutting capacity, as well as reduced vibration, making them a worthwhile investment for more serious woodworking projects.
Ultimately, the best size blade to use will depend largely on the scope and size of your project.
Can I use a dado blade on dwe7485?
Yes, you can use a dado blade on the DeWalt DWE7485. It is a great tool for making straight, precise cuts when working on larger projects like plywood, paneling, and flooring. To use the dado blade on the DWE7485, you need to purchase the appropriate sized dado blade and the adjustable riving knife.
Then, you’ll need to install the dado blade onto your saw, make sure you have a zero-clearance throat plate in place, and adjust the riving knife to the thickness of the blade. Finally, once everything is in place, you can begin making cuts.
Just remember to keep the saw’s speed setting at a reasonable level and ensure proper safety precautions while using the dado blade.
Can you use a 10 blade on a 8 table saw?
No, it is not recommended to use a 10 blade on an 8 table saw as the blade diameter is too large for the saw arbor or shaft. The blade may slip, or the arbor may not have been designed to handle the additional strain of a larger blade.
This can cause serious harm or damage to both the saw and the operator. In addition, the larger 10 inch blades also typically produce a slower rotational speed than the smaller 8 inch blades, which can result in poorer cutting performance.
It is strongly recommended to only use blades that are designed for the particular size of the table saw that you are using.
What size blade does a DeWALT DWE7485 take?
The DeWALT DWE7485 can take a variety of blades, depending on the type of saw you have. For example, the DeWALT DWE7485T which is a compact job site table saw has a 20-tooth carbide blade included with the saw.
This saw also accommodates a 10-inch, 24-tooth carbide blade, as well as other common types of 10-inch blades. The DeWALT DWE7485XE which is a jobsite table saw with a rolling stand allows for a 10-inch, 40-tooth carbide blade and other common 10-inch blade types.
The DeWALT DWE7485RS model which is a jobsite table with a rack and pinion fence has a 10-inch, 40-tooth carbide blade included in the package and can also commonly accommodate other sizes of 10-inch blades.
Can my table saw use a dado blade?
Yes, your table saw can use a dado blade. A dado blade is a set of two or more blades or chipper cutters that can be mounted together on a table saw arbor, allowing you to make wide grooves or slots in wood.
This is a handy tool for making cabinets, shelving, and even some types of furniture, as well as other woodworking projects where you need to cut wider dadoes or slots than a typical saw blade allows.
Dado blades are designed to work on table saws, although you may need to check that your saw can accommodate the particular dado blade you’re planning to use. Additionally, you may need to add a zero-clearance throat plate to your saw to help prevent kickback from the larger size of the cut caused by the dado blade.
When used properly, however, dado blades can make woodworking projects much easier, and if you already own a table saw, you can use it in combination with a dado blade to make wide cuts with ease.
What replaced the DW745?
The DeWalt DW745 has been replaced by the DeWalt DCS7485T1 60V MAX Portable Table Saw with FLEXVOLT ADVANTAGE. This table saw has several improvements over the older DW745, including a brushless motor for maximum power, a guard system for improved cutter visibility and protection, as well as an onboard storage system for carrying the saw and accessories.
The FLEXVOLT Advantaged battery system allows for increased cutting power and runtime, so you’ll be able to make longer cuts with the DCS7485T1. Additionally, a workstand and rolling stand are available for the DCS7485T1, so you can move it from job-site to job-site easily.
With the advanced features and portability of the DCS7485T1, you’ll be able to tackle any job with confidence and convenience.