IKEA kitchen cabinets are typically measured in metric instead of imperial measurements, though either system can be used. When measuring a cabinet, the width is measured from the interior of one side to the interior of the other side.
The depth is the distance from the front of the cabinet to the back and is typically between 21-34 cm. The height is measured from the top edge of the cabinet to the finished floor and is typically between 40-160 cm.
The shelves of the cabinet are typically measured in a similar fashion. The width should be the same as the cabinet itself and the depth is normally around 20 cm. The height is typically adjustable, depending on what type of shelf is in the cabinet.
For full height shelves, they range from 33-140 cm while adjustable shelves range from 16-50 cm.
When measuring IKEA kitchen cabinets, it’s important to take accurate measurements to ensure the cabinet will fit, as requests for returns or replacements can be costly. Additionally, checking the measurements against the measurements provided on the IKEA website can save time in the installation process.
Do IKEA measure and fit kitchens?
Yes, IKEA does measure and fit kitchens. As part of the installation process, IKEA has a kitchen planner to make sure your kitchen will fit perfectly into the available space. Their experienced installation team can measure and make sure the cabinets, countertops, doors, drawers, and appliances fit the exact layout.
They can also check that the areas around windows and other fixtures, walls, and plumbing are dimensioned correctly. In addition, IKEA installations include connecting appliances as well as finishes and accessories like plinths, cover panels, handles, and splashbacks.
Any necessary modifications can be made too, including adjustments to utilities, walls, and floors.
How do you read cabinet measurements?
Cabinet measurements are usually communicated using height, width, and depth measurements in either metric or imperial units, such as inches or centimeters. To read cabinet measurements, it’s important to note which unit of measure is being used and to pay close attention to the order in which the measurements are listed.
Generally, the measurements will be read from left to right with the height listed first, followed by the width, followed by the depth. It’s also important to note whether the measurements refer to the overall outer measurements of the cabinet or only the inside storage space.
For example, a cabinet labeled as “18” W x 24″ H x 12″ D” would refer to an 18-inch wide, 24-inch high, and 12-inch deep cabinet with the overall measurement being the outer size. However, if the measurements are listed as “14” W x 22″ H x 10″ D (I), this would refer to the internal space inside the cabinet, with 14-inches of width, 22-inches of height, and 10-inches of depth.
What are standard kitchen cabinet sizes?
Standard kitchen cabinet sizes vary depending on the brand and style of cabinets you choose. Generally, the standard width of an upper cabinet is 30 inches and a height of 30 inches to 42 inches. The depth of a standard base cabinet is 24 inches and 34.
5 inches height. Wall cabinets are typically 12 to 13 inches deep, 30 inches tall and come in 30-36 inch widths. For islands, base cabinets generally have a depth of 24 inches, a height of 36 inches and can range from 15-48 inches in width.
Sink base cabinets are typically 30 inches tall, 24 inches wide and 21-24 inches deep.
Does cabinet depth include doors?
Yes, cabinet depth typically includes the thickness of the doors when measuring the depth of the cabinet. The depth of the cabinet, when including doors, is typically measured from the front of the door to the back of the cabinet, including the thickness of the door (s).
This measurement will also take into account any type of door hardware that is attached, such as hinges and handles. For cabinets with same-depth doors, the cabinet’s total depth plus door thickness should equal the depth of the door itself, while if a cabinet is deeper than its door, the cabinet depth plus door thickness will exceed the depth of the door.
Does IKEA come to measure your kitchen?
No, IKEA does not come to measure your kitchen, however they do have a number of services that can help you plan and measure your kitchen. IKEA offers a Kitchen Planning & Design Service, where a trained expert will visit your home and provide guidance in designing your kitchen and help you to plan your space.
The expert will take measurements and make sure the design is viable for your kitchen. You will also be able to use the IKEA 3D Kitchen Planner to design your kitchen online, as well as utilize the Kitchen Measurement & Assembly Service, where someone from IKEA will measure your kitchen in person and assemble the cabinets and countertops for you.
There is also IKEA’s In-Home Shopping Service, where you can shop for IKEA products from the comfort of your own home and the IKEA Installers will install it for you.
How much does it cost to have someone install an IKEA kitchen?
The cost of having someone install an IKEA kitchen varies greatly depending on the complexity of the project and the provider you choose. Generally speaking, the cost of installation services could range anywhere from $1,500-$8,000.
This cost includes labor, delivery, and assembly of your IKEA kitchen components. You may also need to pay separately for certain additional services such as plumbing, electrical installations, countertop installations, backsplash installations, or wall and floor tiling.
Some installation companies may provide these services as part of their overall price, or you may need to source them independently.
Ideally, you should search for the most experienced and professional installers who can help you get the most out of your IKEA kitchen. It’s recommended that you shop around and get quotes from several installation companies before making a decision.
Also, read through reviews and customer feedback to get an idea of the quality of installation services provided by each company.
How much do IKEA charge to fit a kitchen UK?
IKEA does not offer fitting services directly, however they do partner with a company called TaskRabbit in the UK which provides a fitting service for IKEA products. Prices for TaskRabbit’s IKEA fitting service vary depending on the size and complexity of the kitchen.
TaskRabbit typically charges £35 for the first hour and £20 for every additional hour, then an additional charge for any extras that may be needed such as additional cabinetry or appliances. For a small kitchen with the basic cabinetry costs for IKEA kitchen fitting may range from £100 to £300 whereas a larger kitchen with many appliances and custom cabinetry could cost upwards of £1000.
Ultimately, the total cost will depend on the amount of work involved in the kitchen fitting.
Is IKEA kitchen installation expensive?
IKEA kitchen installation is among the more affordable installation options in the kitchen cabinetry market. Depending on the size of your kitchen and the complexity of the installation job, the cost for IKEA kitchen installation services can range from about $400 to upwards of $1,500.
This cost includes delivery, assembly, installation, and customization of your IKEA kitchen units. This is a relatively affordable cost given the expertise and time often involved in assembling and installing kitchen cabinetry.
If you hire an independent contractor to install your IKEA kitchen, the cost could range from about $100 per hour to $125 per hour depending on their experience and the complexity of the job. You could also consider having IKEA installers come to your home and complete the job, which may cost a bit more in comparison.
How much does a kitchen fitter charge per day UK?
The cost of a kitchen fitter in the UK can vary depending on the type of job required and the experience of the fitter. Generally, a kitchen fitter charges between £100-£200 per day; however, it may cost more or less depending on the materials needed and how complex the job is.
Some factors which could increase the cost of a kitchen fitter could include: fitting a new kitchen, dealing with complicated wiring, or plumbing problems, or the length of the job. It is important to check with a few different kitchen fitters to make sure that you are getting the best price for your project.
Additionally, it is best to get quotes in writing before hiring a kitchen fitter, so that you are fully aware of the cost.
How far should cabinets be from wall?
Cabinets should be placed approximately 2.5-3 inches away from the wall, depending on the size of the cabinets. This allows space for any moulding or trim that may come with the cabinet install, as well as space to switch out hinges and handles if necessary.
Additionally, it allows space for the cabinet door to open without hitting the wall. If your cabinets are inset into the wall (e. g. for a built-in look), then your cabinet doors should be flush with the wall with no space between them.
How much space should be between base cabinets and wall cabinets?
This depends heavily on the size of the room and the types of cabinets you are installing. Generally, a gap between wall and base cabinets of around 3 inches should be sufficient for most spaces. If you are using a taller above-the-counter cabinet, then a larger gap may be necessary to accommodate this.
If you are unsure about the measurements, it is always advisable to consult an expert in the field. If you are working with someone who has installed cupboards before, they will be able to advise you on the most appropriate measurement for your space.
Additionally, hiring a professional to install the cabinets for you will ensure the gap is the correct size and the whole job is done to the highest standard.
Is there a gap behind IKEA kitchen units?
Yes, there is typically a gap behind IKEA kitchen units. This gap is generally about 2” wide and is installed to accommodate the pipes and cables that may be fitted behind the cabinet. The gap may also be used for venting purposes, so that air can flow from behind the unit to the outside of the kitchen.
Additionally, if you have a gap, it may be possible to install storage or shelving units or other fixtures behind the kitchen units, which can help you create an even more functional kitchen space.
Should kitchen cabinets be flush with wall?
Generally speaking, it is preferable for kitchen cabinets to be flush with the walls. This is because it makes the kitchen look tidier and more organized, which can be more aesthetically pleasing. Additionally, having kitchen cabinets installed perfectly flush with the wall can make it easier to clean the area.
With the cabinets being flush, dirt and other messes can be swept or wiped away quickly and easily. Finally, having the cabinets flush with the wall can allow for a stronger wall finish overall. This tight fit prevents the cabinets from shifting or sliding over time, which can help prolong the life of the cabinets and ensure the walls remain free of damage.
How do you fill space between cabinets and walls?
The best way to fill in the space between cabinets and walls is to measure the gap and then cut filler pieces of wood to fit it. This can be made of a hardwood like maple or oak, but you can also use plywood that has been pre-finished or paint-grade wood such as trim or framing lumber.
You will need to make sure that the cut pieces have a smooth finish to ensure that it does not snag clothing or get dust and dirt trapped in the crevices. Once the fit is perfect, use wood glue and finish nails to secure it in place.
After this, you can sand the area and then stain and finish the filler pieces to match the cabinets for a seamless look.
Can you stack IKEA sektion cabinets?
Yes, it is possible to stack IKEA Sektion cabinets. The IKEA Sektion line of kitchen cabinets are designed to be able to be stacked and combined together in many different configurations, allowing you to customize your storage and design.
Before attempting to stack cabinets, IKEA recommends that you read their instructions carefully and make sure that you have all the necessary brackets and components. When stacking the cabinets, it is important to secure them properly with screws and to use the rear fastener for top cabinets.
Additionally, wall cabinets must be securely mounted to the wall and be of the same height. Finally, do not stack more than three cabinets high to ensure safety and stability. With the proper preparation and care, it is easy to stack your IKEA Sektion cabinets and customize your kitchen storage.
How do I put filler strips on IKEA cabinets?
Installing filler strips on IKEA cabinets can be a fairly easy process, if you have the right tools and materials. Before beginning the installation, you will need to make sure you are able to measure accurately.
In addition to a tape measure, you’ll need a level, a drill, a jigsaw, various screwdrivers, and wood glue.
To begin, you should measure the gap between the cabinet and the wall to check if there is a need for a gap filler. You can then measure the length of the filler strips and cut them to fit.
Once you have cut the filler strips to size, you will then need to drill pilot holes into them. These will be used to attach the strips to the cabinet. Before drilling, you will need to make sure that the strips are level and properly aligned to the cabinet.
Now it’s time to install the filler strips. You will need to apply a small amount of wood glue along the edges of the strips and place them against the cabinet. Use your drill with screws to secure them in place.
Once your filler strips are installed, you can finish the assembly with a few nails or screws to secure them to the wall. Be sure to use a level to ensure everything is perfectly aligned before nailing or screwing into the wall.
And that’s how you put filler strips on IKEA cabinets. Make sure to check out the instructions that come with your particular IKEA products for the exact instructions on how to install your specific cabinet product.
Can you stack base cabinets on top of each other?
Yes, you can stack base cabinets on top of each other. This is an ideal option for optimizing space in a small kitchen or bathroom, or if you are looking to store items and keep them organized. Be sure to use self-leveling screws to secure the upper cabinet to the lower one, and use cabinetry handles with the appropriate size and shape to ensure easy and safe access.
Also, be sure to measure twice before stacking the cabinets, as there needs to be enough clearance to properly open and close drawers and doors. Overall, stacking base cabinets is a great option if you need to make use of limited space and keep items organized.