Ideally, the curtain rod should be mounted just below the crown molding so that the curtains will hang without touching the molding. For more privacy, the rods can be mounted lower, about three to four inches below the bottom edge of the crown molding.
This will provide more coverage, but the curtains will appear lower in the window. When installing the brackets, make sure you use a level to make sure both sides of the rod are level. Place one bracket slightly higher than the other so that the curtains hang properly.
Be sure to use the appropriate wall anchors or screws to securely support the rod and protect the wall behind it.
How do you hang curtain rods with trim?
Hanging curtain rods with trim involves taking the necessary measurements, securing the mounting brackets, and setting in the curtain rod. The first step is to measure the length and width of the window to make sure the curtains fit properly.
Next, you’ll need to make sure that the trim will fit onto the mounting brackets, which should be placed 4 to 6 inches beyond the window on either side. Once the mounting hardware is in place, you’re ready to set in the curtain rod.
If the rod is adjustable, twist it until it’s the correct width for your window; if not, be sure to measure and cut the rod first. If the trim you’re using is extra-wide, you may want to use two curtain rods for a more even look.
Insert the rod into the brackets and secure it in place. Finally, place the decorative trim around the rod and attach it with the mounting hardware previously used.
Do curtain rods go above window trim?
Yes, curtain rods should generally be installed above the window trim. Installing the rod above the trim can bring more attention to the window, allowing the trim to act as a frame for the window treatment.
Additionally, this allows the rod to be closer to the ceiling, which can make the window look larger. To be sure the rod is installed in the correct spot, carefully measure the distance between the trim and the ceiling or the distance between the trim and the top of the window.
How far should a curtain rod extend past window?
A curtain rod should extend between 4-8 inches past each side of the window frame. This will allow the curtains to cover the entire window, as well as hang properly when opened and closed. The exact distance will depend on the desired look, and can be adjusted according to personal preference.
Most people prefer the rod to extend about 6 inches past each side of the window frame.
How do you dress two windows together?
When dressing two windows together, the important thing to keep in mind is creating balance and cohesion between the two. First, determine the style you are going for – a traditional, contemporary, eclectic, or another look.
Once you decide on a look, choose complementary fabrics for each window and decide whether to use the same color palette, pattern, material, and trim. Additionally, consider selecting hardware that is the same or complementary for both windows, such as the same style rod or tiebacks.
Finally, hang the swags and curtains so they have a similar and balanced impact on both windows. When done correctly, dressing two windows together can add a polished appearance and give the room an overall cohesive look.
How do you hang curtains when the window is at the top of the wall?
Hanging curtains when the window is at the top of the wall requires a specific type of curtain rod and the appropriate mounting hardware. To begin, measure the width of the window, and purchase a curtain rod that is both slightly longer and wider than the window’s width.
Since the weight of the curtains can pull the rod down, some care should be taken to make sure the rod is adequately secured.
With your rod, use mounting brackets to fix it securely at its desired height, high on the wall above the window. Make sure the bracket is higher than the window’s top trim, so the curtains hang lower and more evenly.
Once the rods are securely mounted, hang the curtains. Look for brackets that match the rod, and fit over its ends. These brackets will make sure the curtains hang properly and won’t slip off their rod.
When the brackets fit, slide the curtains down the sides of the rod, and the installation is complete.
How high above trim should you hang curtains?
The best answer depends on the size and style of your room, as well as your preference. Generally speaking, it is recommended to hang them between 4-6 inches higher than the window trim. This is because when curtains are too short, the proportions look strange, and when curtains are too long, they bunch up too much by the time they reach the floor.
If you have very tall windows, you may wish to hang them even slightly higher than 6 inches, depending on the length of the curtains and your desired effect. Additionally, if you are hanging curtains for purely decorative reasons and don’t intend to use them for privacy, you may wish to hang them higher, to create the illusion of taller ceilings.
Should curtains cover window molding?
The answer to this question depends on individual preference and the look you are attempting to achieve. If you like the look of window molding and want it to stand out, then it may be best to avoid curtains that hang down to the bottom of your window frame and simply install a curtain rod above the window molding.
This will keep the molding visible and maintain the look of the window. On the other hand, if you prefer a more unified look and don’t mind losing sight of the window molding, then you may want to hang curtains all the way down to the bottom that encompass the molding so that it is no longer visible.
Ultimately, the decision of whether to cover window molding with curtains is a matter of personal preference.
How far below trim should curtains hang?
The ideal distance curtains should hang below the trim is about 4 to 6 inches. This provides an ample amount of space for curtains to hang and gather, allowing for optimal light control. If the window is wider than 6 feet, it’s generally recommended to hang curtains 8 inches below the trim to create enough fullness.
Factors such as personal preference, the style of the curtains, the size of the room, and the overall look of the space can influence the length of curtains, so it’s important to factor in all details before making a decision.
Should curtains hang inside the window frame?
Whether to hang curtains inside or outside of the window frame is ultimately a matter of preference, and there are many valid reasons for either option. Historically, interior designers and homeowners have favored hanging curtains inside the window frame, although in more modern times, outside the window frame has become a fashionable alternative.
Hanging curtains inside the window frame offers the benefit of visually and literally expanding the window, making a room appear larger and brighter. This option also provides an opportunity to introduce a splash of contrasting colors or fabrics, as the wall around the window can be painted or wallpapered to provide a unique backdrop.
Preference of outside mounting generally comes down to aesthetics. Doing so gives the window a larger presence, and the curtains can be puddled or draped onto the floor to create a more dramatic look.
It should be noted that outside mounting can make a window appear smaller, and is also better for blocking out drafts.
In the end, since there is no right or wrong when it comes to choosing between inside or outside mounting, it’s all about what looks best in your home. Experiment with fabrics, colors and mounting options to find the best look for your windows.
How do you close a gap between curtains and walls?
When closing a gap between curtains and walls, there are a few different techniques you can use depending on the type of curtains you have. One technique is to use a tension rod to hold the curtains in place against the wall.
You can find these rods in your local hardware store, and they come with all the necessary hardware and brackets needed to securely mount it to the wall. Another option is to use a double curtain rod, with one rod secured to the wall and the other to the ceiling.
This option will leave a pocket of air between the curtains and the wall and will also help to reduce any noise from coming in from outside. If you are using rings with clip-on curtains, you can strategically clip the curtains closer to the wall to help minimize a gap.
Finally, you can always add a decorative valance to the top of your curtains, which will help to mask the gap and add more contrast to the space.
Is there a way to put up curtains without drilling holes?
Yes, there are several ways to hang curtains without drilling holes in your wall. One of the most common methods is to use a curtain rod and bracket system. Curtain rods and brackets can be installed on any wall surface, such as drywall, plaster, concrete, or tile, without the need to drill.
Most systems come with either hook-type or screw-in brackets. With hook-type brackets, make sure to secure them to the wall with an appropriate adhesive.
Another way to hang curtains without drilling is with tension rods. Tension rods are mainly used in smaller spaces and work by tension rather than screws or hooks. They are simple to install as they only require you to place the rod in place, adjust the tension, and then fit it in between the walls or window casing.
The tension they exert keeps them in place and they bear little weight.
Finally, adhesive curtain rods are an inexpensive way to hang curtains without drilling. Just measure the size of the window and then cut the rod to fit. Afterwards, use the adhesive strips that come with the rod to secure it in place.
The adhesive strips are strong enough to support most lightweight curtains.
What can I use in place of a curtain rod?
If you are looking for an alternative to a curtain rod, there are a number of options to choose from. One of the simplest options is to use a tension rod. This uses the tension generated by the weight of the curtain and rod to hold the curtains in place.
Additionally, you can use a wooden rod, usually painted in a coordinating color to the rest of your window treatment. If a wooden rod is not an option, there are varieties of decorative dowels, PVC pipes, and conduit pipes that are inexpensive and can often be found at hardware stores.
You can mount these rods directly onto the wall, or use brackets for additional support. Additionally, for a more creative and unique look, you can use rope or even rope and eye hooks to hang your curtains from.