To calculate how many curtains you need, you will need to measure the width of your window, then decide the type of folds or pleats you would like for your curtains.
For most types of curtains, the standard order is for one single panel for each track or rod, measuring the width of the window, plus some extra material for fullness.
To allow for pleats, measure your window size, then you will want to add an extra 1–3 times the width of your window.
To determine the length of your curtains, measure the height of your window, then add the desired height of your curtains. Most curtains are installed 6–12 inches above your window trim to make your window appear taller.
Once you have the measurements, you can determine the amount of fabric you will need. The standard fabric width is usually between 42–60 inches, so if your fabric width is 48 inches, and you determined that your curtain width should be 60 inches, you would need to purchase two standard widths of fabric.
The length of your curtains will tell you how much fabric you need for it, as a standard ream of fabric is typically between 24–40 yards of fabric.
Finally, for each window, take your product of track/rod width plus extra fullness, and multiply it by the length of your curtains. This will tell you the total amount of fabric you need for each curtain panel.
This sum should give you the total of fabric you will need for your entire order.
How many yards of fabric do I need for 96 inch curtains?
To calculate the amount of fabric needed for 96 inch curtains, you need to keep in mind that most fabric is 44 inches or wider, and you will need to provide a hem allowance for the bottom of the curtains.
First, convert the 96 inches to yards by dividing the inches by 36: 96/36 = 2.666 yards.
Then determine the width of the fabric you are using. Let’s assume you are using fabric that is 44 inches wide, so you would divide the total curtain length of 2.666 yards by 0.444 (44/36). This comes to 6 yards, plus an additional 0.
5 yards to allow for the hem.
Therefore, you would need 6.5 yards of fabric for the 96 inch curtains.
What size curtains do I need for a 100 inch window?
The most common curtain size to fit a 100 inch window is a curtain panel that is either 95 inches or 96 inches wide. To achieve maximum coverage, you should also select a curtain length that is either just long enough to meet the floor, or a few inches longer that will puddle on the floor slightly.
Typically, you should choose panels that are at least twice the width of the window, to ensure that the curtains are full and provide ample coverage of natural light. The height of the curtains will depend on your personal preference, but should extend at least a few inches above the frame of the window for the best coverage.
For a more luxurious look, you could look for extra-long curtains that reach the ceiling or extend down to the floor.
How wide should curtains be for 120 inch window?
The general rule for curtain width is that the curtains should be two to three times the width of the window. This will produce full, luxurious curtains that frame the window in an aesthetically pleasing way.
For a 120 inch window, curtains should be approximately 240 to 360 inches wide. It is also important to consider the style of the curtains when determining how wide they should be. If the curtains are sheer and meant to be light and airy, then two times the window width should suffice.
If the curtains are heavier, like velvet, then three times the window width is a better option. For a 120 inch window, 120 inches of fabric should be the minimum width, regardless of the fabric. Additionally, you will want to factor in any extra fullness you desire to give your curtains even more body, usually 15 to 20 inches of extra fullness is sufficient.
How much window area is covered by the curtains?
The amount of window area covered by the curtains depends on the size and shape of the window as well as the style of curtains or blinds used. If a full-length curtain is used on a window, it will usually cover the entire window – roughly three-quarters to the full height and width of the window, depending on whether the curtains are hung on a track, rod, or attached directly to the wall.
Blinds will usually cover the entire window as well, due to their design. For shorter curtain styles such as café curtains, valances, or swags, coverage will depend on the exact size and shape of the window, as well as the size of the curtains and how far they are pulled back.
How do you measure curtain fullness?
Measuring curtain fullness is relatively easy, and there’s no right or wrong way to do it. Generally, you should measure the width of the curtain material, then divide it by the actual width of the space that you intend to cover.
The result of this calculation is referred to as a ‘curtain fullness factor’ and it’s used to determine the amounf of fullness you need to achieve the desired look.
For instance, if your curtain fabric measures 90 inches in width, and you have a window space that is 60 inches in width, then you’d divide 90 by 60 to get a 1.5 fullness factor. A fullness factor of 1.
5 means that you need to use 1.5 times the width of the specified window space. This would mean that you’ll need to use a curtain fabric of 90 inches and of a length that is appropriate for your window.
You can also measure curtain fullness by counting the number of gathers and pleats. This is calculated by measuring the highest point of the pleat or gather, dividing it with the curtain width, and then multiplying it by 2.
For example, if the highest point of the pleat is 15 inches and the width of the curtain is 90 inches wide, 15 divided by 90 is 0.17 and times 2 is 0.34. In this case, the fullness would be 0.34. The higher the fullness factor, the more fullness your curtains will have.
Generally, a fullness factor of 1.3 will give you a very full look, whereas a fullness factor of 0.6 will still be relatively full.
Is the first number length or width for curtains?
The first number when measuring curtains generally refers to the width, rather than the length. When measuring the curtain width, you should measure it from the inside of the window frame. The length, on the other hand, is measured from the highest point you would like the curtains to hang from.
It is important to measure both the width and the length of your curtains to ensure that you are purchasing the correct size for your window. When hanging curtains, you should also take into account whether your curtains will hang flush with the window, or have a gap between the window and the curtains.
Is there a curtain length between 63 and 84?
Yes, there are several curtain length options between 63 and 84 inches. Some popular options include 66, 72, 78, and 80 inches. This should provide more than enough variety for you to choose from, depending on your style, room size, and desired look.
When selecting a curtain length between 63 and 84 inches, be sure to also consider other factors, like the type of window covering, the style of the room, and the color of your curtains. You can also reach out to an interior designer or design consultant for advice to help ensure that you make the best decision for your space.
Are 84 inch curtains floor length?
Unfortunately, 84 inch curtains are not considered to be floor length. Typically, floor length curtains should hang from the ceiling or just above the window frame, and measure approximately 84″ or longer.
The standard for floor length curtains is about 88″ or more, so 84 inch curtains will fall about 4 inches short of being considered floor length.
How much wider should curtains be than the opening?
Curtains should be at least 2-3 times wider than the aperture to look full and draping. Having the rod extend beyond the windowsill can provide a more dramatic look, allowing for more fullness. The wider the curtains, the higher the likelihood of heavy fabrics, like velvet, pleated drapes, or numerous panels falling gracefully.
For a lighter and breezier look, consider using some sheer curtains as an overlay over sturdier fabrics.
How do you calculate fabric for curtains?
Calculating fabric for curtains is not an exact science, as there are a variety of factors that need to be taken into consideration. However, there are a few guidelines that can help ensure that you purchase the exact amount of fabric necessary.
The most important factor is to measure the width and height of the window. Measure from the top of the curtain rod to the floor, as well as from the middle of the window out to the side, then multiply these two numbers to get the total square footage.
Next, decide if you want to use a pleat, ruffle, or other style for the top of the curtain.
Once you have the top style and size of the curtain determined, you then need to determine the fullness of the actual curtain. This is an important factor because the amount of fabric needed depends greatly on the fullness you prefer.
Most draperies are done with two or three times fullness, meaning that you would need two or three times the length of the window in order to achieve the look.
Finally, add the extra inches of fabric needed for hems, pleats and other embellishments. This will give you the full panel width for each curtain. Multiply this by the number of panels desired per window, and you will have the total amount of fabric required for your curtains.
How many yards is 96 curtains?
It depends on the size and length of the curtains you are purchasing. Generally, it is safe to say that the average size of a single curtain is around 42 inches wide and 84 inches long, totaling to about 36 feet for each curtain.
With 96 curtains, that would total to 3,456 feet, or about 1,136 yards.