Cleaning your Dolphin pool cleaner is simple and straightforward. To start, remove debris from all the baskets and from the filter, and any debris from the skimmer basket. Once that is done, you should hoover your pool using the Dolphin pool cleaner on its regular cleaning cycle.
Depending on the type of Dolphin you have, it might be necessary to manually guide it around some areas of your pool. After this, separate all the parts and use a garden hose to rinse off the pool cleaner and all the filters.
If you have a cartridge filter, you will need to clean out the filter as well. For this, you should refer to your owner’s manual. When you have finished all the cleaning, put the pool cleaner back together and turn on the power.
Now your pool cleaner should be sparkly clean and ready to use.
Can I leave the dolphin premier in the pool?
No, you should not leave the Dolphin Premier in the pool. While it is designed to be used in a pool, it is important to store the robotic pool cleaner away from the pool when it is not in use. This not only reduces the risk of accidental damage to the Dolphin Premier but also ensures that your pool will be free of debris and grime in between cleanings.
Additionally, storing the Dolphin Premier in a dry location when not in use helps to extend the life of the product and keep the motor, electronic components, and seals free of moisture damage.
How many hours per day should I run my pool cleaner?
It depends on the type of pool cleaner you have. Generally, robotic pool cleaners will require 4–6 hours of operation per day while suction cleaners can take 8-12 hours to effectively clean your pool.
To determine the exact time you should run your pool cleaner, you should always refer to your manufacturer’s recommendations. This should be included in your pool cleaner’s user manual. In addition, different environmental factors such as algae growth and dirt accumulation should also be taken into consideration when determining the optimal run time for your pool cleaner.
If your pool is more prone to dirt and debris, you may need to run it a bit longer each day, whereas if your pool is relatively clean, you may be fine running it for only a few hours each day.
Can robotic pool cleaners be left in the pool?
Yes, robotic pool cleaners can be left in the pool. This type of cleaner works independently from other pool cleaning systems and can be programmed to run at certain times to clean your pool. They are connected to the pool filter and will vacuum, scrub and filter the water.
The robotic cleaner does not need direct supervision and can run for several hours a day, depending on your pool size. However, you should follow the manufacturer’s instructions for the best results.
Also, it is important to regularly clean the filters and check the brushes to ensure your robotic pool cleaner is operating effectively.
How do you empty a premier pool vacuum?
To empty a Premier pool vacuum, begin by disconnecting the vacuum head from the telescopic pole. Carefully turn the vacuum head over to empty out the debris. Depending on the model of the Premier pool vacuum, you may need to remove the lid of the filter to completely empty the debris.
Once the debris is emptied, rinse the filter and lid off and set aside to dry. Then, take the vacuum head and rinse it off with clean water. If you need to, you can use a hose to clean off any remaining debris.
Once the head is clean, reattach it to the telescopic pole. You are now ready to continue vacuuming your pool!.
Why does my dolphin pool cleaner do wheelies?
Your Dolphin pool cleaner may be doing wheelies for a few different reasons. One is that it may have detected an obstruction that has caused it to temporarily reverse direction and go in a different direction.
This can make it appear like it is doing a wheelie. Another reason is that there may be a problem with the pool cleaner’s internal motor or gears that is causing it to reverse direction erratically, resulting in it doing wheelies.
Lastly, there could be an issue with the weight distribution of the pool cleaner that is making it move erratically.
In any case, if your Dolphin pool cleaner is doing wheelies, then it is important to get it inspected and serviced by a qualified technician to ensure that it is working safely and efficiently.
How long is the cycle on a dolphin?
The cycle on a dolphin is determined by whether it is a wild dolphin or one in captivity. In the wild, their cycles are determined by their environment and can vary depending on such factors as climate and available food sources.
In captivity, dolphins on average have a cycle of roughly 5-7 days, although some may cycle more frequently or less frequently depending on their individual biology, age, and diet. Generally speaking, dolphins will start their cycle with a period of increased activity, followed by a resting period in which they become more relaxed and move more slowly.
Why is my robotic pool cleaner not moving?
It is possible that your robotic pool cleaner is not moving due to a range of possible issues. The most common issues that cause this type of problem include a blockage in the propulsion system, a power source issue, or a dirty filter and debris buildup.
Firstly, check to see if there are any blockages in the propulsion system. This could be caused by debris or other objects that are stuck in the propulsion area and preventing it from moving. Make sure to clean out any blockages and remove any objects that may be preventing the movement of the robotic pool cleaner.
Secondly, check the power source. Make sure the power cord is securely plugged into the outlet, and the power switch is switched on. If the robot is still not operating, try using a different outlet in your house to see if that resolves the issue.
Lastly, it could be the result of a dirty or clogged filter or a build-up of debris in the robotic pool cleaner, preventing it from moving. To resolve this issue, make sure to clean and replace the filter of the robotic pool cleaner and remove any debris or leaves that may have accumulated in the machine.
Once all of these steps have been taken, your robotic pool cleaner should start working properly again. However, if you continue to have issues, it may be best to contact the manufacturer or a professional pool servicing company for further advice.
How do I fix my Dolphin power supply?
To fix a Dolphin power supply, you will need to troubleshoot and identify the issue causing the issue. First, check the power cord and outlet to make sure power is getting to the power supply. If power is getting to the power supply and it still doesn’t work, you need to find out if power is getting to the motherboard.
To do this, you will need to open up the case and disconnect the power supply from the motherboard. Then, use a multimeter to test the voltages coming out of the power supply. Refer to your owner’s manual or the manufacturer’s website to get an accurate reading.
If the voltage readings are off, you will likely need to replace your power supply. However, if you find that all the voltage readings are normal, it is likely an issue with the motherboard or other components.
You can then test the power supply using a known-good power supply from a computer or other device. If the power supply works in another computer or device, the issue is likely with the motherboard or components and not the power supply itself.
Why does my creepy crawly stop working?
There could be a number of reasons why your creepy crawly stops working. It could be an issue with its power source, such as the batteries or external power source becoming weak or disconnected. The motors that power the gears and wheels could be overheating or wearing out, causing the creepy crawly to stop working.
Mechanical components, such as the motors, gears and wheels, can become worn or damaged, causing the creepy crawly to stop. The programmable chip or other electronic components inside the creepy crawly could also be short-circuited or affected by a power surge, resulting in it stopping to function.
Additionally, some components may require recalibration or cleaning periodically in order to continue working properly. If none of these issues are present, then it may be that the creepy crawly’s software is outdated and needs to be updated to its most recent version.
Why is my pool vacuum moving slowly?
There are a few potential reasons why your pool vacuum may be moving slowly.
The first is that the suction of the vacuum may be too low. If the suction level of the vacuum is too low, it will not be able to move quickly through the water. This can potentially be fixed by checking the pool filter and making sure the filter and pump are working correctly.
Additionally, you should check the hose and make sure there are no clogs or air pockets that could be reducing the suction.
The second potential reason is that the bristles on the vacuum head may be clogged with dirt and debris. This can slow down the movement of water over the vacuum head and reduce its effectiveness. You can check the bristles and clean them regularly to avoid this.
Finally, the third reason could be that the length of the hose is too long. The longer the hose is, the less water can get through it at any given time. This can slow down the speed of the vacuum significantly.
If this is the case, you may need to shorten the hose or purchase a stronger vacuum.
In conclusion, there are a few possible reasons why your pool vacuum is moving slowly. Checking the suction level and making sure there are no clogs or air pockets in the hose can help improve the vacuum’s performance.
Additionally, you should check the bristles regularly and make sure the hose is the correct length, otherwise you may need to purchase a stronger vacuum.