It’s important to clean your Puffco regularly to ensure that it’s working properly, and to make sure all the parts are in good shape.
First, make sure that the Puffco is not plugged into power or any charging source. Remove all accessories or attachments, such as the atomizer, bowl cap and loading tool, from the chamber before you begin cleaning.
Use a cotton swab and alcohol to clean the glass and chamber, as well as around where the atomizer connects to the battery. Additionally, use a toothbrush with soap and warm water to clean the airholes and chamber.
Be sure to brush away any herb residue or buildup.
Once you’re finished, dry the parts with a microfiber cloth and reinstall the atomizer and attachments. Then, apply a small drop of oil or lubricant to the threads so they don’t corrode and work smoothly.
Finally, it’s important to regularly clean your Puffco mouthpiece. To do this, use a cotton swab and alcohol to clean off any buildup or residue. Then, use a toothbrush dipped in soapy water to clean the mouthpiece and dry it with a microfiber cloth.
Regular cleaning and maintenance will ensure that your Puffco is kept in working order and lasts for years to come.
How do you remove residue from a Puffco?
Removing residue from a Puffco is relatively easy. The first step is to unscrew the atomizer section from the battery section. Once unscrewed, open the atomizer section and use tweezers to remove the saturated cotton.
Then use a q-tip and rubbing alcohol or distilled vinegar to clean the inside of the atomizer section. Pay particular attention to the small holes located in the center of the atomizer section as it is important that these holes are clean in order to ensure a proper atomization.
Once all of the residue has been removed, rinse the atomizer section with warm water. Allow the atomizer section to completely dry before reassembling the Puffco and using it again.
Can I clean my Puffco with alcohol?
Yes, you can clean your Puffco with alcohol. It is usually best to use either isopropyl alcohol that is 70% or higher in concentration or grain alcohol (90% or higher). When you clean your Puffco, it is important to make sure you completely disassemble the device, including removing the titanium or quartz nails and the ceramic bowl.
Then, submerged the pieces into the alcohol and use a cotton swab soaked in the alcohol to clean the remaining parts. Make sure to rinse all of the pieces afterwards with warm water and soap. You should also use a cotton swab or a Q-tip to remove any excess dirt or grime from the vaporizer’s vents, buttons, and bottom cover.
Once everything is completely dry, you can reassemble your Puffco and enjoy!.
How do you clean a Puffco Indiglow glass?
Cleaning a Puffco Indiglow glass is not an overly difficult task and can be done with just a few simple steps.
The first step is to begin by using some isopropyl alcohol that is at least 91% proof to break down and release the oils and residue from the glass. The alcohol should be poured around the Puffco into a small bowl and then used with a cotton swab to scrub any residues off the glass.
Once the alcohol has been applied and the residue has been removed, you can then use a q-tip and warm water to take any remaining residue off the Puffco Indiglow glass. All you need to do is dip the q-tip in the warm water and then use it to clean the glass.
You can also use a soft-bristled toothbrush if you want a deeper clean.
Afterwards, you can rinse the Puffco with cold water and then let it air dry. Finally, use a paper towel to clean up any residual moisture.
With these few simple steps, you should be able to effectively clean a Puffco Indiglow glass.
Can I use 70% alcohol to clean Puffco?
Yes, you can use 70% alcohol to clean your Puffco. However, make sure you use isopropyl alcohol and not any other type of alcohol. To properly clean your Puffco with 70% isopropyl alcohol, make sure you first power off the device and then get a cotton swab soaked with the alcohol and use it to clean the exterior of the device.
Make sure you pay special attention to the atomizer’s threads, mouthpiece and the glass bubbler. To clean the inside of the device and the mouthpiece, insert the soaked cotton swab inside the air vents.
after that, it would be a good idea to soak a cloth in isopropyl alcohol and use it to gently wipe the device and make sure it is completely cleaned and de-greased. You should also be extra careful and stay away from soaking the mouthpiece in alcohol.
Finally, you should allow your device to dry before you use it.
Can you soak Puffco plus chamber in alcohol?
No, you should not soak the chamber of a Puffco Plus in alcohol. Alcohol can damage the chamber and cause it to malfunction. It is best to clean the chamber with isopropyl alcohol and a q-tip or other soft, lint-free cloth.
Start by heating up the chamber until the back of it is red hot. Once the chamber is heated, turn off the Puffco Plus and let it cool down before using a q-tip filled with isopropyl alcohol to gently scrub any stubborn residue or oil from the chamber.
If needed, you can use a pipe cleaner or even a paper clip to get into any hard to reach places. Once you are finished, use a dry q-tip or rag to clean away any excess alcohol.
Can I use hydrogen peroxide to clean my Puffco?
Yes, you can use hydrogen peroxide to clean your Puffco. Before using hydrogen peroxide, though, it’s important to disassemble your device as much as possible. After taking your Puffco apart, you can soak the parts in a bowl or cup of hydrogen peroxide for 10-15 minutes.
After the soak, wash any visible residue off with a cotton swab and rinse with warm water. Let your Puffco parts air dry and then reassemble your device. After each use, it’s a good idea to perform a cleaning with a q-tip and isopropyl alcohol for best results.
Can you smoke flower in a Puffco?
No, you cannot smoke flower in a Puffco. Puffco specializes in wax/concentrates and does not carry any products designed for smoking flower. The Puffco Peak is a great device for enjoying wax/concentrates, but it is not designed to accommodate flower.
The Peak offers four heat settings, a 30-second heat time, 20-Use battery, and a session mode which provides the smoothest experience for wax/concentrates. If you are looking for a device to enjoy flower, consider finding a dry herb vaporizer.
Why is my Puffco crackling?
The most likely cause of your Puffco crackling is that it is experiencing some sort of electrical issue. This could be due to a lack of power, a short circuit, or even a clogged airway. If you have recently changed the atomizer or battery, this may also be the cause of the issue.
First, try to check the wiring and connections to ensure that everything is secure. Additionally, try to ensure that the battery connections are clean and free of any dirt or debris. If these steps do not resolve the issue, it is likely that the atomizer or battery needs to be replaced.
Lastly, you may want to try cleaning the chamber of your Puffco to ensure it is free of debris and any blockages that could be causing the crackling sound.
How do you take apart a peak Pro?
The first step in taking apart a peak Pro is to disconnect the power cable from the device and remove any external storage devices, such as USB flash drives, from it. Once the power cable and external storage devices are removed, you can turn the device over and remove the back panel.
This is usually done by pressing two latches located on either side of the device and lifting it off.
Once the back panel is removed, you can access the internal components of the device. The components are usually attached to the mainboard with small screws, either Philips or hex head screws. Make sure to keep track of the screws and remember to put them back in the same place when you are done.
Next, you can remove the hard drive and RAM sticks, if present, by gently prying them out of their respective slots. Be careful not to apply too much pressure or use too much force, as this can damage the components.
After the hard drive and RAM sticks have been removed, you can take out the mainboard.
Once the mainboard is out of the peak Pro, you can begin the process of taking it apart. You need to be careful when taking the mainboard apart as it contains sensitive components. Firstly, unscrew all of the small screws that are held in place by the mainboard, including any screws holding the fan in place.
Next, locate and disconnect all of the cables and ports attached to the mainboard, such as the USB ports, Ethernet port, and power ports. When all cables and ports have been disconnected, you can begin to gently pry apart the mainboard layers.
You may need to apply a small amount of force but be careful not to apply too much as it may damage the components.
Finally, you need to make sure that you properly dispose of any components that you remove from the peak Pro. This can include the mainboard, RAM sticks, hard drive, and any other components that were removed during the disassembly process.
Once all components have been removed, you can clean the peak Pro with a damp cloth before reassembling it.
Can you put Puffco glass in dishwasher?
No, you definitely cannot put your Puffco glass piece in the dishwasher. The high heat and strong detergents can damage and potentially ruin your piece, so it is best to avoid putting it in the dishwasher.
Instead, wash your piece with lukewarm water and a mild soap; avoid abrasive sponges and cleaning solutions, as they can also damage your piece. Once you have washed your glass, you should also dry it with a microfiber cloth or soft tissue paper.
How long does Puffco plus chamber last?
The lifespan of the Puffco Plus chamber depends on a variety of factors, such as how often you use it, how well you maintain it, and the type of concentrate you are using. Generally, the electric atomizer of the Puffco Plus will last for around 200 to 300 sessions, or several months with regular use.
However, the chamber itself, in which you insert the concentrate, is made of ceramic and is not a replaceable part of the device. It should last much longer than the atomizer, but the estimated longevity of the chamber will depend on the same variables.
With proper upkeep, it should last anywhere from 6 months to several years.
Regardless of whether you’re using the Puffco Plus or any other vaporizer, it’s important to maintain your device and keep it clean in order to get the most out of it and extend its life as much as possible.