Connecting your Guardzilla camera is easy! First, make sure your router is up and running and the Guardzilla app is downloaded onto your smartphone or tablet.
Then, plug in your Guardzilla camera and press the power button for 3 seconds. This will make the LED light on the camera start blinking yellow. That means it’s ready for setup.
Next, ensure that your device is connected to the same Wi-Fi network as your Guardzilla camera. Using the app, select the “Set up a Device” option and follow the prompts to connect the camera. If you have trouble connecting the camera to your Wi-Fi network, the app will guide you through the troubleshooting process.
Once your Guardzilla camera is connected to your Wi-Fi network and the app, you can start using its features. You can easily customize your settings on the app and use it to monitor your home.
Enjoy the peace of mind that comes with having your Guardzilla camera set up!
Can I still use my Guardzilla cameras?
Yes, you can still use your Guardzilla cameras. You just need to make sure that your Wi-Fi connection is strong enough for the cameras to function. Additionally, you may need to update their firmware if you haven’t done so in a while to ensure that they are running as efficiently as possible.
Additionally, depending on where you purchased your cameras from, there may be a Guardzilla app or website that you must access in order to view your cameras or make adjustments to their settings. As long as your cameras are connected to your Wi-Fi and you have an account with Guardzilla (if relevant), you should be able to use your Guardzilla cameras without issue.
Does Guardzilla need wifi?
Yes, Guardzilla does need wifi in order to operate. Guardzilla is a line of home security systems and cameras that require a connection to a wireless router in order to function. The Guardzilla cameras are wireless and require a wireless router in order to send video footage to your smartphone and access their cloud-based storage.
The Guardzilla security systems require a wireless router in order to communicate with various sensors that are included in the system, such as door and window sensors, motion sensors, smoke detectors, and more.
Additionally, certain features on the Guardzilla app, such as the Armed Away Mode, Remote Lockout Mode, and Geofencing, require a connection to the internet in order to work. Therefore, in order to use a Guardzilla home security system and cameras, a wifi connection is necessary.
Is there an app for Guardzilla?
Yes, there is an app for Guardzilla. The Guardzilla app is available for iOS and Android devices and allows you to control all of the Guardzilla products from one central app. The Guardzilla app can be used to arm and disarm security systems, monitor sensors, control lighting, and securely access recorded video from your Guardzilla devices.
You can also receive alerts about any activity detected by Guardzilla sensors, view live video streams, and access a complete history of all Guardzilla activity. The Guardzilla app is designed to be user-friendly and makes it easy to keep an eye on your home while on the go.
Is Guardzilla an IP camera?
No, Guardzilla is not an IP camera. Rather, it is a home security system with wireless Wi-Fi security cameras that provide HD video and audio recording as well as motion and sound detection. Guardzilla also includes a built-in auto-dialer and real-time alerts, allowing you to monitor your home or office in real-time.
Guardzilla also has night vision capabilities, a 110-dB alarm, and a one-year battery life. With the Guardzilla app, you can access the cameras and control system remotely, allowing you to actively monitor your home or office from wherever you are.
How do I get my IP camera back online?
Getting your IP camera back online is relatively straightforward. First, you will need to locate the IP address of your camera. You can do this by logging in to your router and accessing the list of connected devices.
Once you have identified your IP camera, you should check the power supply and ensure that it is securely connected to the router and receiving power. If it is not, try plugging it into a different outlet or using different cables.
Next, check the network connection by accessing the settings menu on your camera and connecting to the network. You can either use an Ethernet cable directly or connect to your Wi-Fi network if the camera is equipped to do so.
If you are having trouble connecting, make sure the settings match those of your router—namely, the IP address, Subnet Mask, Gateway and DNS. Finally, you should also ensure that the firmware of your IP camera is up to date in order to prevent any compatibility issues.
Once you have successfully connected the camera to your network, you should be able to access the stream from any device connected to the same network. It is also possible to set up your camera to be accessed from outside the network using port forwarding on the router.
In the event that the above steps do not work, it is best to contact the manufacturer for technical support. The manufacturer should be able to provide step-by-step guidance for resolving your issue as quickly as possible.
How do I reset my defender DVR password?
In order to reset your Defender DVR password, you will need to follow the steps below.
1. Locate the System Setup button on the top of the DVR. Depending on the DVR model, this button may be labeled as “Menu”, “Menu Button”, “System”, etc.
2. Push the button. This will display the main setup menu.
3. Use the joystick or arrow buttons on the front of the DVR to select the “System Administration” options. This option is usually located near the bottom of the menu.
4. When you select the “System Administration” option, it will display a prompt or pop-up window asking for a password.
5. Enter the default password: “admin” (Notice: Even if you have modified the password previously, the default password will still work).
6. After entering the default password, you will be directed to the user settings page. Here you can enter your new password and make any other changes you wish.
7. Make sure to click the “Save” button when you are done making modifications.
By following these steps, you should be able to reset your DVR password.
How do I connect my defender camera to the Internet?
To connect your defender camera to the Internet, you will need to ensure that you have a compatible router and modem that are setup to broadcast a wireless connection. After your router and modem are setup, you will need to plug the power supply into the power port of your defender camera.
Then, you will need to plug the included network cable into the network port on the back of your camera and the other end into the port on the back of your router. Your defender camera should then successfully be connected to the internet.
If your defender camera does not automatically connect to the internet, you will need to use either the mobile app or the web interface of your defender camera to manually set up your wireless connection.
When manually setting up the wireless connection, you will need to enter your wireless connection details like the wireless network name and the network password. Once your wireless connection details have been entered, you should be able to connect to the internet through your defender camera.
How do I pair camera?
Pairing your camera with a device can be done in a few easy steps.
1. Start by connecting your camera to your device through a USB or wireless connection.
2. Once your camera is connected, open your device’s settings and look for your camera in the list of available devices.
3. Select your camera from the list and enter a unique PIN if prompted.
4. Once the connection is made you will be able to access your cameras features, such as being able to take pictures, change settings, and view a live video feed.
5. To complete the pairing, you’ll need to go through any steps involved in registering the camera and adding it to your account, such as creating a user name and password.
6. Once you have done this, you will be able to access your camera from both your device and computer.