In order to connect to NVMS7000, you will need to make sure that the computer you’re connecting from has the right configuration and system requirements, including:
1. Microsoft Windows 10, 8, 7, or Vista operating system
2. A compatible web-browser (Internet Explorer, Microsoft Edge, Mozilla Firefox, Google Chrome, Safari)
3. Dual-core processor
4. Minimum 2GB of RAM
5. At least 10 GB of free hard drive space (More if you store video recordings from NVMS7000 on your computer)
6. A 10/100/1000 Ethernet port
Once you’ve determined that your system meets the minimum system requirements, you can start the connection process. First, download the NVMS7000 software that supports your device type (IP camera or NVR) from the Nelly’s Security website.
Follow the on-screen instructions when you install the software onto your computer.
Once you’ve done so, open the software and launch the configuration menu. Here, you’ll be able to add your device and select a unique name for it. Enter the IP address, port number, and username/password for your device.
Then, click “OK” to complete the NVMS7000 configuration.
Finally, you can click “Live View” to connect to your device and view any recordings or live streaming feeds. If you’d like to make adjustments to motion detection, recording, and playback settings, you can do so through the Configuration/Operation menu.
If you have any questions or trouble connecting to your NVMS7000 device, please contact the Nelly’s Security support team directly for assistance.
How can I access NVR over Internet?
Accessing a Network Video Recorder (NVR) over an internet connection is a great way to monitor your premises remotely. To access your NVR over the internet, you’ll first need to have a router with a reliable internet connection that can access the NVR.
The next step is to enable port forwarding on the router and assign a static IP address to the NVR. Once the static IP address is assigned, you can access the NVR using the router’s public IP address.
To connect to the NVR, you would need to use a mobile device or computer. First, you’ll open a web browser and type in the public IP address along with the web port that was setup on the router. This will take you to the NVR’s web interface where you’ll need to login with the username and password.
After logging in, you’ll be able to access the camera and video settings, adjust the resolution and quality, control the PTZ movement and access recordings.
In addition to the above, you may need to configure or install a DDNS service on the router in order to maintain a static IP address on a dynamic IP address network. This DDNS service should provide you with a URL that consists of your DDNS account’s domain and the port number of the NVR.
By using this URL, it becomes easier to access the NVR since it will always be the same URL regardless of the router’s IP address.
With the steps above, you should have a successful way of accessing your NVR over the internet.
Why are my LTS cameras offline?
There could be a variety of reasons why your LTS cameras are offline. The most common ones include a poor or weak Wi-Fi connection, inconsistent or unreliable power source, outdated firmware, or outdated app version.
If your Wi-Fi is having connection issues, try resetting the router or access point to ensure that the connection is stable. Additionally, if your cameras are having power troubles, it could be related to their power source.
Make sure that the power source is reliable and consistent to ensure that the cameras are able to remain connected.
If you’re still having trouble, it could be related to the firmware or app version of your cameras. LTS cameras will occasionally require updates to their firmware and app version in order to remain connected and up-to-date.
To ensure that your cameras are up-to-date, check the settings in the app for any available updates.
If none of the solutions are working for you, you may want to contact the manufacturer for more in-depth troubleshooting or a replacement, if necessary.
How do I get my LTS verification code?
In order to get your LTS verification code, you must go through the appropriate verification process for your account. Depending on the type of account you have, there may be a few different steps you need to take to complete the verification process.
For most accounts, you will be required to submit a few pieces of personal information such as your name, address, social security number, and any other documents required for account approval. This personal information will be used to verify your identity, and you will receive a confirmation email with your LTS verification code once your account has been successfully verified.
If you are unable to verify your identity using the steps above, the next step will be to contact your bank or financial institution and request a verification code. They may be able to provide you with a code that you can use to complete the verification process.
Once you have received your LTS verification code, you should keep it in a secure place as it will be needed anytime you need to make changes to your account or process any transactions.
What app does LTS cameras use?
LTS cameras use the LTS NVR client app for remote viewing and access to features such as motion detection, scheduled recording, and live streaming. The app is designed to be user-friendly and allow you to quickly access all of the features available with LTS cameras.
The app is available on both Android and iOS devices, and is free to download. You can use the app to connect to your LTS camera, stream a live feed, access and modify settings, configure recordings, and access recorded footage.
The app also provides push notifications to alert you of motion detected or a recording that was triggered, allowing for further investigation.
How do I find the IP address of my LTS DVR?
To find the IP address of your LTS DVR, start by connecting the DVR to a router with an Ethernet cable. Then, open the DVR’s menu on the screen and navigate to the Network Settings option. Within this menu you will be able to view the DVR’s current IP address.
Depending on the model of DVR you have, you may also be able to assign the DVR a new IP address. Once the IP address has been found, you can use it to access the DVR remotely using a web browser or the LTS mobile app.
How do I get my CCTV on my IPhone?
In order to get CCTV footage on your iPhone, you will need to first make sure that your camera or surveillance system is compatible with wireless technology and is able to connect with your home wireless network.
After confirming that your CCTV is set up with wireless compatibility, you will also need to install a compatible surveillance app on your iPhone. Most camera systems come with their own app, but if it is not available you can search for dedicated surveillance apps on the Apple Store.
When the app is installed, you will be required to register and log into the service, which will enable you to initiate a connection with your home network. If your camera system requires additional setup for wireless connection, the app will usually guide you in this process.
Once your CCTV is connected to the network, you will be able to see the live footage via the app on your iPhone. From here, you can also usually activate additional features such as audio and motion detection.
How do I activate my LTS IP camera?
If you have recently purchased an LTS IP camera, the set-up process should be relatively straightforward. To get started, you will need to first gather all of the necessary equipment and materials that you will need to activate your camera.
This includes an LTS IP camera, an Ethernet cable, a router, an internet connection, and an NVR. After you have gathered these items, follow the steps below to activate your camera:
1. Connect your camera to your router or network switch using an Ethernet cable.
2. Install the LTS Surveillance Pro software onto your computer. This is the interface that you’ll be using to configure your camera.
3. Run the device discovery process within the software and make sure that your camera is detected.
4. Configure your camera’s settings within the software. At this stage, you’ll need to set up the IP address and user name and password for the camera.
5. Once you’ve configured the settings, your camera should now be accessible from anywhere on your network.
6. In some cases, you may need to configure additional settings for your camera, such as port forwarding, in order for it to be accessible from the internet.
7. Test the camera by trying to access it from a remote location.
Your LTS IP camera should now be successfully activated and ready for use. If you’re having any trouble completing the steps above, contact your camera’s manufacturer for more detailed instructions on how to activate it.
What is LTS default password?
The default password for Long Term Support (LTS) depends on the specific product you are using. For Ubuntu Desktop, the default password is “ubuntu”. For Ubuntu Server, the default user is “ubuntu” and the associated password is blank by default.
For most applications that run on top of Ubuntu, the default user name is “admin” and the password is also blank. If you are using a specific LTS product such as MongoDB or MongoDB Enterprise, the default username and password will be whatever you set when you installed it.
It is important to change the default password as soon as you can to ensure your system is secure.
How do I connect my surveillance camera to WiFi?
To connect your surveillance camera to WiFi, the first step is to make sure that both your camera and your router are powered on and that your router is set up for WiFi connectivity (this may involve opening a web browser, typing in your router’s IP address, and entering any necessary username or password).
Once your router is ready, most surveillance cameras will come with a setup guide that instructs you on how to connect your camera to your home network. In general, this involves setting up your camera with a Network Video Recorder (NVR), configuring your camera’s settings to connect to your home router’s WiFi, selecting the proper wifi channel, entering your home router’s password, and then waiting for the camera to connect.
Finally, if your camera was setup correctly, you will be able to view your camera’s video feed either through the surveillance camera’s own app or through your security system’s software interface.
How do I reset my DVR admin password?
If you need to reset the password for your DVR’s administrative account, you will likely need to contact the manufacturer of the DVR directly. Depending on the model and brand of your device, the process for resetting the password may be different.
If you cannot remember the current password for the DVR’s administrative account, the default password may be able to be found in the instruction manual or support documents from the manufacturer. If you can’t locate such documents, you may need to reset the DVR to its factory settings.
To do so, unplug the DVR and reconnect it after a few seconds.
If there is a reset button on the DVR, you may be able to restore it to its default settings by pressing and holding the reset button for 10 seconds or longer. Different kinds of reset buttons may work differently, so be sure to consult the manufacturer’s documentation to determine the proceedure properly.
Doing so will reset both the user and admin passwords to the default settings.
You should also be able to reset the password by connecting the DVR directly to a computer via an Ethernet cable. By accessing the device’s web interface, you should be able to customize the administrative settings, including resetting the password.
Again, make sure to consult the manufacturer’s documentation for details on this process.
In some cases, you may need to contact the manufacturer to obtain a new password. Most companies will be able to provide it to you, but you will likely need to provide some kind of proof of ownership before they do so.
Can you reset NVR without password?
No, it is not possible to reset an NVR without a password. An NVR is a specialized hardware device that is used in a number of surveillance and security applications. It is designed with internal password protection mechanisms that are designed to ensure access to the system is restricted to only those who have been granted access.
The password is typically set during the initial setup process and is designed to ensure that the system is not vulnerable to malicious tampering. Without the valid password, it is not possible to reset the NVR or to make any changes to the system.
It is also not possible to bypass or reset the password without submitting the correct credentials.
How do I reset my DVR to factory settings?
To reset your DVR to factory settings, you will need to press and hold down the reset button on the back of the device for at least 10 seconds. The exact location of the reset button can vary depending on your model, so you might need to refer to your user manual for more specific instructions.
After you press and hold the reset button for 10 seconds, the device will begin the reset process which can take up to 5 minutes to complete. Once the device has fully reset, the DVR will restart and you will be prompted to configure your settings once again.
To restore any recordings that were previously made on the DVR, you will need to perform a backup restore as the factory reset wipes all memory from the device.
Where can I find my hikvision DVR password?
If you have forgotten or lost the password to your Hikvision DVR, the only way to reset the password is to perform a factory reset. Depending on your DVR model, there are different instructions for performing a reset.
For instance, if you have a DVR-4116HS-S, you would need to locate the “Reset” button on the back of the DVR. Press and hold the reset button for 10 seconds and it will cause the DVR to reset and clear out any settings it contains.
After the restart, you’ll be able to access the DVR using the default username and password, which you’ll be able to find in the user manual of the device.
The default user information varies by model, so make sure you refer to the user manual to find the right information. Once you access the settings, you can create a new password and make any other changes you want to the settings.
It’s important to store the password somewhere secure and to keep multiple copies in different places as a backup. This will help ensure that you don’t forget or lose the password in future.
