The “remote device or resource won’t accept the connection” error in Chrome is often caused by a misconfigured proxy server or firewall. In most cases, you can fix this error by resetting your proxy server settings and reconfiguring your firewall.
To reset your proxy server settings, go to the Chrome menu and select “Settings”. Under the “Advanced” section, click on “System”, then select “Open your computer’s proxy settings”. In the window that pops up, click the “LAN Settings” tab, then uncheck the box labelled “Automatically detect settings”.
Finally, click “OK” to save your changes.
To reconfigure your firewall, go to the Control Panel on your computer and select “Windows Defender Firewall”. Click “Advanced Settings” and then select “Inbound Rules”. On the left sidebar, select “New Rule” and then select “Protocol Type”.
Choose “Hypertext Transfer Protocol (HTTP)” and click “Next”. On the following screen, select “Allow The Connection” and then click “Next”. On the next screen, ensure that all available networks are selected and click “Finish”.
This should enable remote connections to your computer.
Once you have completed these steps, restart your computer and try again. Your problem should be fixed and the “remote device or resource won’t accept the connection” error should be gone.
How do I fix the device or resource www Microsoft COM is not setup to accept connections on port the World Wide Web Service HTTP?
In order to fix the issue of “www. Microsoft. COM is not setup to accept connections on port the World Wide Web Service HTTP,” you will need to first determine what port the World Wide Web Service is running on.
You can typically find this out by checking the ports that are enabled in the Windows Firewall settings, or by checking the settings in the World Wide Web Service configuration.
Once you know the correct port, you will then need to adjust the server’s bindings so that it is listening on that port. This can be done in the Internet Information Services (IIS) Manager. You will need to click on ‘Sites’ from the left side bar, and then select ‘Bindings’ from the center pane.
Then, click ‘Add’ to add the new port and then save your changes.
Finally, open up the Windows Firewall settings and make sure that the port you specified is allowed through the firewall. This can be done by clicking ‘Inbound Rules’ and then ‘New Rule. ‘ Follow the steps in the wizard and make sure to specify the port that you added to the Bindings.
Once you have done all the steps outlined above, your server should now be properly configured to accept connections on port the World Wide Web Service HTTP.
How do I fix err proxy connection failed?
If you are seeing the “ERR_PROXY_CONNECTION_FAILED” error on your browser, there are a few steps you can take to try to fix the issue.
First, you should try restarting your browser and the computer. This can help free up memory and clear stored information that could be causing the error.
If the problem persists, you should try updating your browser. Outdated browsers are more likely to encounter software-related issues like this.
You should also check your web proxy settings to make sure they’re configured correctly. Sometimes, incorrect settings can cause browser errors. Additionally, if you are using a proxy to access the web, try bypassing the proxy to see if it helps.
If all else fails, resetting your browser settings can often be effective. This will reset the browser to its default settings without affecting any stored data or passwords.
In some cases, you may need to contact your Internet Service Provider (ISP) to investigate further. The exact cause of the error may be isolated to specific software or settings that an ISP can help remedy.
How do I get rid of proxy error on Chrome?
If you’re getting a proxy error when trying to access websites on Chrome, there are a few steps you can try to solve the issue.
First, you’ll want to check your internet connection and make sure there are no issues with your router or modem. If everything looks alright, open up Chrome and go to the settings menu. Under the Advanced settings, open up the System section.
Scroll down and find the Network tab and select “Change Proxy Settings”.
Once in the network tab, select the radio button next to “No Proxy” and click “OK”. This will disable any proxy setting you may have had set up, which should resolve the issue.
If the issue persists, you can try clearing your Chrome browser data by navigating to History-> Clear Browsing Data. Make sure to select the “All Time” option and tick the “Cookies and other site data” option then click “Clear Data”.
This should help resolve any corrupted data that may have been causing the issue.
Finally, if none of the above steps work, it may be best to revert back to the original proxy settings that were set up on your browser. To do this, go back to the Network tab in the System settings and select the radio button next to “Use System Proxy Settings” and click “OK”.
This should restore any previously saved proxy settings and help resolve the issue.
These are some of the steps you can try to get rid of proxy errors on Chrome. If the issue still persists, it may be best to reach out to your internet service provider for more help.
What does a proxy error mean?
A proxy error is an error message that is displayed when a website or service is not accessible via a web proxy. This type of error is typically displayed when a proxy server receives a request from a web browser that it is not able to process.
Generally, this occurs because the proxy server is unable to contact the website or service that it was attempting to access, meaning that the website or service is either down or the proxy server is not able to communicate with it.
It may also be displayed when the proxy server is not able to reach the requested site due to censorship, firewall rules, or other restrictions. In some cases, the error message will include additional information and instructions as to how to solve the issue.
How do you fix there is something wrong with the proxy server or the address is incorrect?
There are a few different steps that can be taken to fix an issue with a proxy server or an incorrect address.
First, verify that the address is correct. If the proxy server or address is incorrect, double-check the spelling and make sure there are no typos.
Second, clear the browser’s cache, cookies, and temporary internet files. This will reset the browser, which may help fix the issue.
Third, try accessing the page through a different browser. If it works through a different browser, the issue may be with the original browser installed on the device.
Fourth, check to ensure the proxy server is properly configured. If the proxy server needs to be reconfigured, please consult the IT department for help.
If none of these steps are successful, the issue may be with the router or the network itself. In this case, resetting the modem or router may help fix the issue. Depending on the type of address, the IT department may need to be contacted for assistance.
How do I fix device or resource www Microsoft COM is not responding?
If you are experiencing a problem where websites with www.microsoft.com and other related Microsoft websites are not loading or responding, then you may have a connectivity issue.
First, verify your system time and date is correct. If these are incorrect, they can interfere with authentication and connection to Microsoft websites.
Next, make sure you’re using up to date web browser, such as the latest version of Chrome, Firefox, Safari, or Internet Explorer. Older browsers may not be able to properly connect to the Microsoft website.
Additionally, check your firewall settings and make sure that your system is not blocking access to the website. Also, you may temporarily disable the firewall to see if this resolves the issue. To do this, go to the Control Panel and select Windows Firewall.
Then, select the “Turn Windows Firewall on or off” option. On the next page, choose the option to turn off all firewall settings.
If your system is still unable to connect to the website, then try another computer or device. If the website works on another device, there may be an issue with your device’s connection or software.
If none of the above solutions help, then you may want to contact a computer technician to resolve the problem. A technician can check your system for malware or other problems that may be interfering with access to the Microsoft website.
How do I link a device to Microsoft?
Linking a device to Microsoft requires a few simple steps to ensure that your device is correctly synced to your account.
1. Begin by ensuring that you are signed in to your Microsoft account on the device you want to link. If your device is a Windows 10 computer or tablet, the device will likely already be signed in.
2. Once the Microsoft account is linked, review the security options for the device. You can go to Manage my Microsoft account to set up two-factor authentication, set location services, and control app usages.
Additionally, you can review your activities to see what’s been used and accessed.
3. If you want to sync data across devices, such as email, contacts, and calendar appointments, you can select the items that you would like to sync. Go to the OneDrive settings, select Options, and then choose Sync your settings across devices.
4. Lastly, you can link it to other devices within your home. This could be a PC, Xbox, or Windows Phone. To do this, you need to open the Microsoft account app on the device, select Add devices and then choose the type of device you want to link.
You will be asked to enter the associated code for the device.
By following these steps, you can link a device to Microsoft and ensure that your personal information is securely synced across all your connected devices.
How do I get my computer to recognize my device?
In order for your computer to recognize your device, there are several steps you should follow:
1. Connect the device to your computer using a USB cable. If you do not have the correct cable, it should be provided with the device.
2. Power on the device and make sure that its driver is installed properly. If not, you can download the driver that is compatible with your device and your computer’s operating system.
3. Once the driver is installed, open the ‘Device Manager’ on your computer.
4. It should detect the device in the list of devices and show its information in the ‘Device Manager’.
5. Check that the device is enabled and properly configured. You may need to install additional software depending on the type of device.
6. Finally, make sure that the device is ready to use. It should now appear in ‘My Computer’ or ‘Computer’ (depending on your operating system).
These steps should help you get your computer to recognize your device. If the device still isn’t detected, try restarting your computer and repeating the steps. If the problem persists, consider contacting the manufacturer’s support team.
How do I re enable a device in Office 365?
If you need to re-enable a device in your Office 365 account, here are the steps to follow:
1. Log into your Office 365 account and open the admin center.
2. Under the ‘Users’ section, select ‘Devices’.
3. Locate the device you want to re-enable and select the checkbox next to it.
4. Click ‘Activate’ and a popup window will appear.
5. Check the box next to ‘Disable this device’ and click ‘Activate’.
6. Confirm that the device is now activated by checking the ‘Status’ column.
7. Once you have confirmed the device has been re-activated, you can log into your Office 365 account with the device.
Can’t add a device to my Microsoft account?
If you are having issues adding a device to your Microsoft account, there are a few potential issues and solutions you can try.
First, make sure that you are signing in on the device with the correct Microsoft account information. If you are having trouble remembering the credentials, you can always reset your password by going to the Microsoft Security website and using your email address or phone number to reset the password.
Secondly, double-check that you have the latest version of Windows installed on the device. You can usually do this by going to the Settings App and selecting “Check For Updates”.
Lastly, if you are still having issues, you may need to contact Microsoft Support or search the Microsoft Community forums to troubleshoot any specific issues. Microsoft Support can help you verify that you are signing in with the correct account information and can help troubleshoot any technical issues you may be having.
How does Microsoft find my device work?
Microsoft Find my Device is an essential tool that helps users locate, lock, erase, send a message from, and reset remotely access their devices if they happen to get lost or stolen. To use the feature, users download the free Microsoft Find My Device app and install it onto their devices.
After its set up, users can remotely keep track of the device’s location on the map. If the device is missing, users can lock it and even set off an alarm to locate it, if they think it’s within close vicinity.
If it’s out of reach, users can choose to erase the device’s data to keep personal and work info secure. Additionally, they can also send a message with a contact number to that person in possession of the device.
This way, users have the chance to get it back safely and securely.
How do I connect my iphone to my Microsoft account?
If you want to connect your iPhone with your Microsoft account, follow these steps:
1. Open Settings on your iPhone and go to “Accounts & Passwords”.
2. Tap on “Add Account” and then select “Microsoft”.
3. Enter your Microsoft account email address and password and then tap “Sign in”.
4. For security purposes, you may need to enter an additional code or answer security questions.
5. Once you have successfully signed in, you will be able to access your Microsoft Account on your iPhone. You can view files and documents associated with your account, such as Word, Excel and PowerPoint documents.
You may also be able to receive push notifications associated with your account when you are signed in.
6. To adjust your account settings or log out of your account, go back to Settings, tap on “Accounts & Passwords” and select your Microsoft account. You can make changes here as desired.
How do I create a trusted device?
Creating a trusted device is an important step in ensuring the safety of your online accounts. It is a process by which a particular device is identified as being safe to access your account from, meaning you won’t need to provide two-factor authentication (2FA) every time you want to log in.
Here’s how you can create a trusted device for your accounts:
1. Find the settings or security page for the account you want to set up. Look for the option to manage your trusted devices.
2. Opt in to the option to have your device marked as a trusted device. Depending on where you are setting up the device, this may require you to enter a code that is sent via email or text message.
3. Check that the settings are in place and that your device has been designated as a safe device. You should receive some kind of feedback or notification that your device is now trusted.
4. Repeat this process for each account with which you want to link a trusted device.
Using trusted devices is a simple way to ensure your personal accounts remain secure yet also easy to access. Keep in mind you may need to reset your trusted devices if you ever delete the device or download new security software.
How do I add a trusted device to my Google account?
To add a trusted device to your Google Account, first make sure you have a compatible device that supports Google Play Services. This includes most Android phones, tablets and watches, and a select few iPhones, iPads, and iPods.
Once you have a compatible device, you can begin the process of adding it as a trusted device. To start, open up your device’s Google settings, then tap on Security. From there, look for an option labeled ‘Trusted devices’ and tap on it.
On the Trusted devices page, you should see an option to add a new device. Tap on it, and you’ll be asked to enter the device security code. This code is usually found on the back of your device (if it was provided) or can be generated through the device settings.
Once you’ve entered the device security code, you should see a notification asking you to confirm that you trust this device. Tap on the button to confirm, and your device will now be listed as a trusted device on your Google account.
That’s it! You’re now all set to use your newly added trusted device with your Google account.
How do you reset your proxy server?
Resetting your proxy server involves resetting the proxy settings in your network settings. Depending on how your network is set up, the steps may vary.
If you are using a web proxy, then your web browser should have a settings page where you can change the proxy settings, usually located in the “Advanced” or “Network” section in the settings of the browser, where you can enter the IP address of your proxy server.
If you are using a SOCKS proxy, then you can reset it by running the command “ netsh winsock reset” in a Command Prompt window with administrator privileges, to reset the Windows Socket settings.
If you are using a VPN, then you can reset it by resetting the network settings. Depending on the type of VPN, the steps may vary. Additionally, some VPNs have specific processes to reset the VPN settings.
If you are using a proxy server utility, then you can reset it by simply uninstalling and reinstalling the application that you used to set up the proxy.
How do I resolve a proxy problem?
A proxy problem can be resolved in a few different ways, depending on the specific issue that is causing the problem.
If you are having trouble connecting to a website due to a proxy issue, make sure that the proxy settings on your computer are set correctly. Check that all the information, such as the proxy server address, port number, and authentication credentials, are all correct and up-to-date.
If the settings need to be changed, they can often be set within the ‘Options’ of the browser you are using to access the website.
If a website is blocking or filtering specific content or requests, try using a different proxy server. If possible, choose a server in a different country or region, as these will have different rules and regulations for allowing certain types of content.
It’s also important to make sure that you choose a secure and reliable server.
Finally, if you are using a web-based proxy server that requires a login and password for access, check to make sure you have the correct login credentials. If the credentials do not work or have been changed, try resetting the password to regain access.
If all else fails and you are still having difficulty resolving the proxy problem, contact the IT department or service provider at your organization to get assistance. They will be able to help you identify and resolve any issue that is preventing you from accessing websites or content online.
Should proxy settings be on or off?
The answer to this question depends on your individual circumstances. Proxy settings are used to connect to a web proxy that can help you obscure your online identity, access geo-restricted websites, and maintain privacy while browsing online.
It is important to understand that proxy settings can have some drawbacks, such as decreased speed and privacy concerns.
If you are an average internet user, it is best to keep proxy settings off. Most internet users do not need to use a proxy server and can remain secure without one. As long as your internet connection is secure and your computer is protected with anti-virus software, your browsing activity should remain private.
However, if you are a frequent traveler or wish to access geo-restricted websites, a proxy server might be beneficial. In this case, you should contact your Internet Service Provider to find out how to set up your proxy settings properly.
Additionally, you should always research the provider of the proxy server and ensure that it maintains a secure connection and offers reliable services.
What is a proxy setting for WIFI?
A proxy setting for a WiFi network is a server between a user’s device and the internet which sits between the user and host servers. It acts as an intermediary, forwarding requests from the user to the host servers and responses back to the user.
A proxy setting allows the user to access websites, web services, and other types of internet content that may be restricted due to geographical location or other internet restrictions. It also provides security benefits by hiding the user’s identity, IP address, and other sensitive information.
In addition, the proxy can help optimize network speed by caching frequently requested webpages and filtering out unwanted content. It is important to note that not all WiFi networks require a proxy setting.
Some networks may already include a proxy server that is transparent to the user.