In order to stop your Apple Watch from saying ‘Please Continue Setup on your iPhone’, follow these instructions:
1. On your iPhone, make sure that you have the latest version of iOS. This can be found by opening the Settings app and tapping General > Software Update.
2. On your iPhone, open the Apple Watch app and make sure that it is signed into the same iCloud account as your Apple Watch.
3. On your iPhone, make sure that Bluetooth is enabled. This can be found by opening the Settings app and tapping Bluetooth.
4. On your Apple Watch, press and hold the side button until the Power Off slider appears. Slide it to the right, then wait for the watch to shut down.
5. On your iPhone, open the Apple Watch app and sign out of your account.
6. On your Apple Watch, press and hold the side button until the Apple logo appears. When the watch has booted up, make sure that Bluetooth is enabled and that the watch is connected to your iPhone.
7. On your iPhone, open the Apple Watch app and sign in to your account again.
If you have followed these steps and the issue persists, please contact Apple Support for further assistance.
What do I do if my Apple Watch won’t pair with my iPhone?
If your Apple Watch won’t pair with your iPhone, there are a few steps you can take to troubleshoot the issue.
First, make sure that both your Apple Watch and iPhone are up to date with the latest iOS updates. To do this, open up the Settings app on your iPhone, select General, and then select Software Update.
If there are any updates available, install them. Once both devices are up to date, try to pair your Apple Watch and iPhone again.
If the issue persists, try restarting both the iPhone and Apple Watch. To restart the Apple Watch, press and hold the side button until the power off slider appears, then slide the slider to turn it off.
To restart the iPhone, press and hold the side button until the Slide to Power Off slider appears.
If the issue is still not resolved, try resetting your Apple Watch. To do this, open the Apple Watch app on your iPhone, select General, then select Reset. Choose Reset All Settings, then enter your Apple Watch passcode when prompted.
Once the Apple Watch has finished resetting, attempt to pair it with your iPhone again.
If none of these troubleshooting steps resolve the issue, you may need to contact Apple for further technical support.
How do I finish my Apple Watch setup?
To finish setting up your Apple Watch, follow these steps:
1. Download and install the Apple Watch app on your iPhone. Once it’s installed, open the app and follow any on screen instructions to connect your Apple Watch to your iPhone.
2. Activate the Apple Watch by entering your Apple ID and password.
3. Select which wrist you will be wearing the Apple Watch on, and follow the on screen instructions for calibrating the watch.
4. Personalize your Apple Watch by selecting a watch face and adjusting your settings, such as Do Not Disturb mode and notification preferences.
5. Try out the apps and features on your Apple Watch, including Siri and FaceTime.
6. Create an Apple Pay account and add your payment card secure in the Apple Watch app.
7. Finally, setup the Health and Activity app and begin tracking your data. Follow the prompts for setting goals, adding friends, and more.
8. You have now successfully setup your Apple Watch. Enjoy!
How do you hard restart an iPhone?
In order to hard restart an iPhone, you need to press and hold both the home button and the power/lock button at the same time. Depending on your device, the power/lock button may be located on the side or top of your device.
When these two buttons are held down together, your device will turn off and then come back on. If the Apple logo appears, that means the hard restart has been successful. Note that this method only works on iPhones with a home button, so if your device has Face ID, you’ll need to take a different approach.
For those devices, press and hold the power/lock button and either one of the volume up or volume down buttons. After a few seconds, your device will turn off and then back on, and if you see the Apple logo, that means you successfully did the hard restart.
How do you force iPhone to restart?
If you need to Force Restart your iPhone, you can do it quite easily by:
1. On an iPhone 6S or earlier, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
2. On an iPhone 7 or 7 Plus, press and hold both the Sleep/Wake and Volume Down buttons for at least 10 seconds, until you see the Apple logo.
3. On an iPhone 8 or later, press and quickly release the Volume Up button. Then press and quickly release the Volume Down button. Finally, press and hold the Side button until you see the Apple logo.
These steps should help you force restart your iPhone and get it working again in most cases, although it may take a few attempts. If your device continues to have problems after attempting to force restart, you may need to seek technical assistance.
How do I reset an unresponsive Apple Watch?
If your Apple Watch is unresponsive, there are a few steps you can take to try resetting it.
The first step is to turn your Apple Watch off and on again. To do this, press and hold the side button until you see the Power Off Slider. After you are done sliding the Power Off option to off, press and hold the side button again and wait for it to power back on.
If turning it off and on again does not fix your issue, you can try to force restart the Apple Watch. To do this, press and hold both the side button and the Digital Crown at the same time for ten seconds.
If this works, you should just see the Apple logo appear on your watch and then it should start working normally again.
If neither of those options work, you can also try resetting your Apple Watch to its factory settings. To do this, open the Watch app on your phone and go to General > Reset > Erase All Content and Settings.
This will completely reset your watch and make it just like it was when you first got it.
If none of the above steps work, you may need to contact Apple Support for help. They can talk you through further steps or provide you with a replacement if necessary.
What happens when force restart doesn’t work on Apple Watch?
If a force restart (holding the digital crown and side button simultaneously) does not work on an Apple Watch, there are a few more steps you can take to try and get your device up and running again.
First, try to disconnect your device from the power source, and then attempt a force restart. If that still does not work, you may need to reset your device completely by following these steps:
1. Press and hold the side button until you see the Power Off slider appear, then drag the slider to turn off your Apple Watch. You may need to press and hold the side button for up to 10 seconds for the slider to appear.
2. To turn your device back on, press and hold the side button again until the Apple logo appears.
3. Access the Apple Watch app on your iPhone and tap General > Reset.
4. Select Erase all content and settings. Be sure to back up your device before doing this.
5. Enter your Apple ID password, then tap Erase all. Once the reset has finished, you can restore the device from your backup if you have one.
If the device still isn’t responding, you may need to take the device to an Apple store to get it serviced.
Why is my Apple Watch screen black and won’t turn on?
The first thing to do is to try restarting it. You can do this by pressing and holding the side button and the Digital Crown at the same time for about 10 seconds, until your Apple Watch turns off and then back on again.
If this doesn’t work, the next step is to check to see if your Apple Watch is properly charged. The best way to do this is to connect your Apple Watch to the charger and make sure the charging symbol appears on the watch face.
If it doesn’t, then your Apple Watch may need to be serviced.
Lastly, if the above steps don’t work, it’s possible that your Apple Watch’s hardware may have been damaged. In this case, the best thing to do is to take it to an Apple store to have it professionally checked and serviced if necessary.
Why is my Apple Watch not responding to touch?
There could be a few reasons why your Apple Watch is not responding to touch and some possible solutions.
First, check your Apple Watch’s settings to make sure the display brightness is set to a comfortable level, so it is easier to interact with the touchscreen. Then, make sure the Do Not Disturb mode is disabled, as this mode may prevent you from interacting with your watch’s touchscreen.
If your Apple Watch has a plastic screen protector on it, it can cause the touchscreen to be unresponsive or not work at all. Try removing the screen protector and see if the touchscreen responds normally.
You can also check the watch bands to make sure they aren’t too tight, which can affect the sensor on the back of the watch and cause it to not respond to touches.
If the tips above do not solve the issue, it could be a software issue. In that case, you can try restarting your Apple Watch or resetting it to factory settings to see if that helps. If none of these solutions fix the issue, then you may need to contact Apple Support for further assistance.
Why can’t I pair my Apple Watch to my new iPhone?
It is possible that you are unable to pair your Apple Watch to your new iPhone due to one of two possible issues. The first is that you must make sure that you have both updated to the latest version of their software (iOS for the iPhone and watchOS for the Apple Watch).
Secondly, you need to make sure that the Apple Watch is within Bluetooth range and that Bluetooth is enabled on your iPhone.
If you have both of those settings up-to-date, the most likely reason that you can’t pair your Apple Watch with your iPhone is because you are not logged into the same iCloud account on both devices.
The Apple Watch and iPhone must be connected to the same iCloud account in order to pair successfully.
If you’re sure your settings are all correct, you may need to unpair and then re-pair your Apple Watch. To do this, head to the ‘Watch’ app on your iPhone, tap the ‘My Watch’ tab and tap ‘Unpair Apple Watch’ at the bottom of the screen.
Once the watch has been unpaired, you will then be able to re-pair it with your iPhone.
If you continue to experience issues, contact Apple Support for further assistance.
How do I reset Apple Watch and pair again?
If you need to reset your Apple Watch and pair it to your iPhone again, you should start by unpairing your Apple Watch from its current iPhone. To do this, open the Watch app on your iPhone, select the “My Watch” tab and then select the information icon next to the watch you want to unpair.
Select “Unpair Apple Watch”, then confirm your decision.
After your Apple Watch is unpaired you can reset it. To reset it, press and hold both the side button and Digital Crown at the same time until you see the Apple logo. Once the watch is reset, you can pair it with your iPhone.
To do this, open the Watch app on your iPhone and select “Start Pairing” at the bottom of the screen. Follow the on-screen instructions to finish pairing your Apple Watch with your iPhone.
How do you unpair an Apple Watch without the old phone?
If you’d like to unpair an Apple Watch without the old phone it is quite simple!
First, make sure that the Apple Watch is running the latest version of watchOS. To check this, open the Watch app on your iPhone and select General > Software Update > Install. After this, make sure that you have an active Wi-Fi connection and that the device you want to pair your Apple Watch with is within range.
Next, open the Watch app and select General > Reset > Erase All Content and Settings. This will reset all of the settings on your Apple Watch.
Once the reset process is complete, you’ll have the option to pair your Apple Watch with a new phone.
To do this, put your Apple Watch and the new device in pairing mode and then select “Set Up Apple Watch” on the device you want to pair it with. You’ll then see the setup screens, and the setup will be complete once you confirm the details.
After that, your Apple Watch should now be paired with the new device without any issue!