The spinning circle is called the Activity indicator and it indicates that your iPhone is performing an task which can take some time. In order to get rid of the spinning circle, you would need to complete or properly terminate the task which is causing the activity indicator.
If you cannot determine the task that is causing the activity indicator, restarting the iPhone should help. To restart the iPhone, press and hold the Power button (located on the right edge of the device or at the top of the device on iPhone X and newer) until the “Slide to Power off” slider appears.
Slide it to power off. Wait thirty seconds before turning your iPhone back on by pressing the power button once again.
If the issue still persists after restarting, you may need to troubleshoot the apps on the device. If an app seems to be causing an issue, try force closing it. To force close an app on an iPhone 8 and older, double-click the Home button and swipe up on the app that you want to close.
To force close an app on an iPhone X or newer, swipe up from the bottom to the middle of the screen and pause until you see the App Switcher. Then, swipe up on the app that you want to close.
If the issue persists, you may need to reset your iPhone. Try backing up your iPhone via iCloud or iTunes before resetting. To reset the device, open the Settings app then tap General and select Reset.
Tap “Erase All Content and Settings”. If prompted, enter your passcode and confirm your selection.
If you have done all of these steps and the spinning circle still appears, contact Apple Support for further assistance.
What do you do when your iPhone won’t connect to WIFI?
When your iPhone won’t connect to WIFI, the first step is to try restarting your iPhone and router. To do this, turn your wifi router off and then, reset your iPhone by pressing and holding the home and power buttons at the same time until you see the Apple logo.
Then, turn your router back on, and try to reconnect your iPhone to wifi.
If restarting your router and iPhone doesn’t work, you can try toggling Airplane mode on and off. To do this, swipe up from the bottom of the Home screen and toggle Airplane mode on and then off from the drop-down menu.
If neither of the above methods works, you can try forgetting and reconnecting to your wifi network. To do this, go to Settings > Wi-Fi, select the wifi network you are connected to, and tap Forget This Network.
Then, reconnect to the wifi network as you normally would.
Finally, if you find that your iPhone is still not connecting to wifi, contact your service provider to ensure your network is working properly.
Why isn’t my iPhone connecting to my home wifi?
If your iPhone is not connecting to your home wifi network, there are several possible causes. The first step to take is to make sure that your wifi network is active and that the network name and password are correct.
If these are both right, then it could be a problem with the router or modem. Try resetting the modem or router, which may require unplugging and plugging back in. If the router is too far away from the iPhone, then consider moving the router closer or use a Wi-Fi extender.
It could also simply be a problem of the device needing to be restarted. Also, check to make sure that the router is updated with its latest firmware version. More involved solutions can include changing the wifi channel on the router for interference-free connectivity or even reinsatlling the router’s software/firmware.
If none of these options work, then visit a local Apple store for further support.
Why can’t I turn off show my caller ID on iPhone spinning?
Unfortunately, it is not possible to turn off Show My Caller ID on iPhones. This is because it is a feature that is not built into the iOS operating system. Show My Caller ID is a feature that is typically offered by cellular carriers to their customers, and it is up to the carrier to decide if it can be enabled or disabled.
Although you cannot disable this feature on your iPhone, there are several things you can do in order to make sure your number remains private. For example, you can add a special prefix to your phone number before dialling a call, or you can use a separate app to dial out, which will then mask your actual phone number.
Alternatively, you can opt to use a third-party VoIP service that offers an anonymous number, so you can make and receive calls without displaying your actual number.
Why is iPhone searching all the time?
iPhone searching all the time could be for a number of different reasons. It could be that you are connected to a network that is constantly searching for available Wi-Fi networks, it could be because you have apps running in the background that are searching for updates, or it could even be because your phone is trying to connect to an iBeacon or Bluetooth device.
If you are seeing this behavior consistently, it is recommended to check your Wi-Fi and Bluetooth settings to make sure nothing is enabled that you don’t need. You might also want to check if any of your apps are set to auto-update in the background, and if so, you can disable this setting to stop your phone from searching for updates all the time.
How do I fix my iPhone when it is stuck on searching?
If your iPhone is stuck on searching, there are a few steps you should follow to try and solve the problem.
First, check if your device is in airplane mode. Make sure the switch is set to OFF. If it is ON, toggle it to OFF and try the search function again.
Second, go to your device’s settings and make sure that the Cellular Data option is turned ON. If it is OFF, toggle it to ON and then try the search function again.
Third, try restarting your iPhone by pressing and holding the sleep/wake button and the Home button (or Volume Down button for iPhone 7 and newer) until the Apple logo appears.
Fourth, go to your device’s settings and select General > Reset > Reset Network Settings. This will reset your network settings and may help to resolve the issue.
Finally, if none of these steps have worked, you should contact your cellular provider and they may be able to help you further.
Why is there a spinning wheel on my iPhone next to WIFI?
The spinning wheel on an iPhone next to the WiFi symbol is an indication that the phone is searching for a wireless network to connect to. This wheel will appear on your device when it is looking for a connection, attempting to join a network, or if there is an issue with the connection.
If the wheel is not spinning and the WiFi symbol is gray, this indicates that the device is not connected to any network. If you’re having trouble connecting, try toggling your WiFi off and on or performing a hard reset on your device to fix the issue.
When I try to connect to WIFI it just spins?
When trying to connect to a WiFi network, if it just spins and appears to not connect, there are likely a few things that could be causing the problem. First, check to make sure that your WiFi is correctly configured and that the signal strength is strong enough.
You may need to restart your router or device for the connection to take effect. Additionally, you may have interference from other electronic devices that may be blocking your signal. Check the area around your router and device for any possible interference, and if any is present, try to move the device or router further away.
Finally, if you are still having difficulty connecting to the wireless network, you may need to contact your internet service provider to verify that it is setup correctly and that you are not having any issues in your area.
Why is my phone stuck on the spinning wheel?
There can be a few reasons why your phone may be stuck on the spinning wheel. If you were in the middle of an operation, like downloading an app, it’s possible that the operation has taken longer than expected and the spinning wheel is indicating that the operation is still processing.
If that’s the case, then you may just have to wait for it to complete.
If the spinning wheel remains on your phone even after trying to reset it, then it could be a sign of a hardware or software issue. It could be caused by a lack of memory on your device or corrupt files within your system.
You may want to contact your phone manufacturer or try to reset your device and see if the issue resolves itself.
What do I do if my iPhone is stuck on the loading screen?
If your iPhone is stuck on the loading screen, you will need to force restart your device. Depending on your device model, press and hold either the sleep/wake button and the Home button or the sleep/wake button and the volume down button until the Apple logo appears.
You may need to hold the buttons for around 10 seconds or so before the logo appears. After your device restarts, you can use it like normal. If the problem persists, you may need to reset your device to factory settings.
To do this, go to Settings > General > Reset > Erase All Contents and Settings. Be aware that this will erase all content and data from your device, so make sure that you have backed up any important data before proceeding.
Once you have reset your device, you should be able to use it as normal.
What if I can’t force restart my iPhone?
If you are unable to force restart your iPhone, there are several other options you can try. One option is to put your iPhone in Recovery mode. You can do this by connecting your iPhone to a computer and using iTunes.
Then, follow the onscreen instructions that come up on iTunes.
Another option is to reset the settings on your iPhone. You can do this by going to Settings > General > Reset > Reset All Settings. This will reset all of the settings on your device, so make sure you have backed up any important data before you reset.
You could also try connecting your iPhone to your computer and updating the software. If a new update is available, it could fix any software related issues that you are having. Lastly, you can try a hard factory reset.
This will erase all data from the device and restore it to its original manufacturer settings. This should only be done as a last resort if other methods do not work.
How do I force my iPhone to turn off without touching the screen?
You can force your iPhone to turn off without touching the screen by pressing and holding both volume buttons and the power button (sometimes referred to as the Side button) on the side of your device for about 10 seconds.
The screen will blank out, the Apple logo will appear in the centre of the screen, followed by the connecting symbol, then the home screen. This process will shut down the iPhone and restart it. If the iPhone has become unresponsive and the ‘hard reset’ has been unsuccessful, this is usually the next step.
Why is my iPhone frozen and won’t turn off?
It is possible that your iPhone has become frozen and won’t turn off due to a software or application issue. This could be caused by an outdated software version, a bug, a faulty app, or perhaps an overworked processor.
If your iPhone has become frozen and won’t turn off, the first thing to do is to force restart it. To do this, press and hold both the Sleep/Wake button and the Home button at the same time until you see the Apple logo on the screen.
This should force a restart and should help to resolve the issue. If this doesn’t work, you can try a hard reset, by holding the Sleep/Wake and Home button for a few seconds until you see the ‘Slide to power off’ option.
Slide to power off your iPhone and then hold the Sleep/Wake button until the Apple logo appears. Finally, if the issue persists, you will need to restore your device from a backup or reset it to factory settings.
It is advisable to back up all your data before attempting this last step.
Why is my iPhone having a black screen with a loading symbol on it iPhone 11?
If your iPhone 11 has a black screen with a loading symbol on it, your device is likely stuck in an infinite reboot loop. This can happen for a variety of reasons, such as a faulty firmware update, a corrupt operating system, physical or hardware damage, or something preventing the device from booting normally.
When this happens, the iPhone 11 can remain stuck in the booting cycle, resulting in a black screen with a loading symbol.
To fix this issue, the first step is to try and reset your iPhone 11. To do this, press and hold the Power (side) button and either Volume Up or Volume Down button until the Slide to Power Off slider appears.
Slide the slider to power off your device completely, then wait a few seconds and press the Power (side) button to turn it back on. If the issue is minor, this should resolve the issue; however, if the black screen with a loading symbol persists, the next step is to try and restore your device from a trusted backup.
If the above steps do not fix your iPhone 11, then the issue is likely caused by a hardware or software issue. For software-related issues, it is best to consult an Apple technician or take your device to an Apple Store for repair.
For hardware issues, it is often best to consult the manufacturer or contact your local mobile phone repair shop for assistance.