The best way to go about it is to use a cabinet filler. Cabinet fillers are narrow pieces of wood that can be added to the inside edges of cabinets to increase their depth. For example, if your existing cabinet depth measures 12 inches, you could add a 2-inch deep filler and have a 14-inch cabinet depth.
Another option is to use cabinet extensions. These are pieces of plywood or other materials that fit over the existing cabinet tops and sides, adding extra space. These can be custom constructed or bought premade.
The third option is to add a cabinet base. This is essentially an extra base cabinet that sits on the floor, essentially increasing the overall cabinet depth.
Finally, you can also choose to replace your existing kitchen cabinets with deeper ones. However, this is the most expensive option and usually requires either a remodel or replacing the entire kitchen entirely.
Can you change the depth of a cabinet?
Yes, you can change the depth of a cabinet. Depending on the type of cabinet, there are different methods for doing this. If the cabinet is an unfinished piece of furniture, you may be able to purchase additional pieces of wood and cut them to the desired size.
Alternatively, you may also be able to purchase a larger piece of wood and have it cut to size at a woodworking shop. You can then use wood glue and finish nails or screws to attach the wood to the existing structure of the cabinet.
If the cabinet is already finished, the best option is to remove the shelves or other components that are attached to the cabinet, then sand the interior surfaces. Using clamps and wood screws, you can then attach additional pieces of wood to the sides of the cabinet.
Finally, you can reattach all of the shelves or components to the new depth of the cabinet. Depending on the type, you may need to fill any holes and apply new paint or stain to the cabinet.
Do upper cabinets come in different depths?
Yes, upper cabinets come in different depths. The average depth of an upper cabinet is 12 to 24 inches, but they can be narrower or wider depending on the design of your kitchen. Narrower cabinets, around 12 inches deep, are great for small spaces, while wider cabinets, 24 inches or more, can be great for storage of more items or taller items.
There are also deeper cabinets, around 36 inches and wider, that are great for bulk storage, appliances and spices. The depth of upper cabinets is often determined by the size of the overall kitchen and the type of items that will be stored in them.
How deep should kitchen cabinets be?
The ideal depth for kitchen cabinets will depend on the size of the space and items that you plan to store in them. Generally, base cabinets should have a minimum depth of 24 inches, but cabinet depth can be as shallow as 12 inches or as deep as 36 inches depending on the size of your space and the items you plan to store.
Shallow cabinets are great for providing easy access to everyday items, while deeper cabinets provide extra storage space and can help minimize counter clutter. Additionally, you may want to consider a cabinet depth that is appropriate for the type of appliances or items you plan to store in it, such as pots and pans, appliances, dishes, etc.
Overall, when considering cabinet depth, it’s best to take into account the items you’ll be needing to store and the size of your space to get the appropriate depth for your kitchen cabinets.
Can upper and lower cabinets be the same depth?
Yes, upper and lower cabinets can be the same depth. In fact, it is becoming increasingly common, as this helps to create a more uniform look in the kitchen without sacrificing storage. Generally speaking, the maximum depth of upper cabinets should be 18 inches, while lower cabinets, if they are meant to be used for storage, can be up to 24 inches deep.
However, some lower cabinets are shallower, such as 15 inches, and this is perfectly fine as well. Ultimately, how deep upper and lower cabinets should be depends largely on the size of the kitchen and the height of the ceilings.
If installing cabinets with drawers, be sure to factor in the depth of the drawers when deciding on the depth of the cabinets.
How deep are Ikea upper cabinets?
The depth of Ikea upper cabinets varies depending on the particular design and collection, however their depth range typically falls somewhere between 12 inches and 20 inches. Depending on your needs, there are standard depth cabinets (just over 12 inches) as well as deeper cabinets (generally 17-20 inches).
Generally speaking, deeper cabinets are better if you want to store large cookware and dishes, while a shallower cabinet may be better for spices and other small items. Additionally, different collections may offer cabinets in different depths, so it’s important to check the measurements before purchasing one.
How far do upper cabinets stick out?
The exact amount that upper cabinets stick out typically depends on a variety of factors, such as the size of the cabinets and if they are installed independently or above a counter. Typically, upper cabinets will stick out a few inches in order to accommodate their depth.
For example, kitchen cabinets are usually 24 inches deep and as such would stick out at least a couple of inches from the wall. If the cabinets are part of a full-height kitchen installation, then there will likely be more space between the cabinets and the wall.
In this case, the cabinets would stick out anywhere from four to six inches from the wall.
How high should cabinets be above stove?
The optimal height for cabinets above a stove is typically 18-20 inches above the stovetop, however this can vary depending on the height of the cook and your own personal preference. Stovetop heights can range from 28-46 inches, so keep that in mind when deciding where to hang your cabinets.
It is important to have enough space to access your stovetop safely and easily. Additionally, avoid mounting the cabinets too low to avoid them getting splattered with grease, food, and other liquids.
It is best to create a comfortable space with enough room for movement when cooking and reaching for ingredients or pans. Lastly, cabinet adhesives should be used when mounting to ensure that your cabinets do not fall and cause injury.
What size cabinet goes over fridge?
When selecting a cabinet to go over a refrigerator, it is important to consider the height of the refrigerator, as well as the desired height of the cabinet and the amount of room available in the space.
Generally, the optimal size cabinet to go over the refrigerator is one that is 15-18 inches taller than the refrigerator, though the exact size may vary depending on the desired height, the size of the refrigerator, and the available space.
Additionally, it is important to measure the space available to ensure that the chosen cabinet is the correct size. When assessing the size of the space, make sure to account for the doors of the refrigerator, as part of the cabinet may need to be removed in order to fit.
Depending on the specific needs of the space, a tall pantry cabinet may be more optimal than a traditional upper cabinet. If partial overlay doors, inset doors, or full overlay doors are desired, those should be considered when selecting a cabinet.
Ultimately, different types and sizes of cabinets can be used over refrigerators, so it is important to be mindful of size and desired functionality when selecting a cabinet for the space.
How do you cover the gap between kitchen cabinets and ceiling?
To cover the gap between kitchen cabinets and the ceiling, the most common method is to install crown molding. Crown molding is a decorative trim used to finish the junction between walls and ceilings.
It adds visual interest and texture to the space. Other options you can use include using a suspended ceiling, adding a shelf, or using a valance. When installing crown molding, measure the gap and cut the piece of trim with a miter saw.
You may also want to use a nail gun for a more secure fit. The trim should then be painted or stained to match the kitchen’s existing style. If you choose to suspend a ceiling, you’ll need to attach it to the wall and then hang the grid.
A shelf can be suspended from the ceiling, while a valance can be installed with hanging clips or onto a board. No matter what option you choose, finishing off the space between the kitchen cabinets and ceiling will make a difference in the overall look.
Why do kitchen cabinets not go to the ceiling?
Kitchen cabinets typically don’t go to the ceiling for several reasons. For one, it would be difficult to access and reach any items stored in the top cabinets. Many kitchen cabinets are quite heavy, which would make installation and removal of the upper cabinets difficult.
In addition, since kitchen cabinets are fairly large, they would block the natural light that can flow into the room if they were placed up to the ceiling. By leaving an open space, air can circulate and natural light can come in, often helping to make the kitchen seem larger.
Finally, having cabinets that reach the ceiling could make the kitchen appear cluttered and cramped, which is why many homeowners opt to leave some space between the top of the cabinets and the ceiling.
How high and deep are most standard base cabinets for kitchens?
Most standard base cabinets for kitchens are 24 inches deep and 36 inches high. The cabinet depths can vary depending on the specific design and style, but the most common depth is 24 inches. The standard height for wall cabinets is usually 12 inches taller than the base cabinets, or 48 inches high.
The cabinet doors come in different heights, too, depending on the cabinet style. The taller the cabinet, the higher the door. Additionally, the depth might vary a bit, depending on what the cabinet is intended for.
For example, a sink cabinet might be a bit deeper than 20 inches to accommodate a kitchen sink.
Are all upper cabinets 12 inches deep?
No, not all upper cabinets are 12 inches deep. Different cabinet styles come in various depths that range from 9 inches to 24 inches, depending on the cabinet style and manufacturer. For example, frameless kitchen cabinets — which are constructed without a face frame — are usually on the deeper end of the spectrum.
Stock cabinets often come in shallower depths, such as 9 inch to 12 inch depths. If a greater degree of customization is desired, custom cabinets can be made with a range of depths.
Do cabinets have to have crown molding?
Cabinets do not have to have crown molding, although it is a common detail that adds an attractive finishing touch to kitchen and bathroom cabinets. Crown molding is typically installed at the top of the cabinet, typically where the cabinets meet the ceiling.
Crown molding adds an elegant, decorative touch, and it can help to create the illusion of higher ceilings. Depending on the style of cabinets, crown molding can also transition gracefully from a tall to a shorter cabinet.
Color matching and customized profiles can be used to complete a seamless look. Ultimately, whether or not to add crown molding to the cabinets is a personal choice, one that should be based on the style, budget and overall design.