To determine the size of the bar on your Stihl chainsaw, you will need to consult your owner’s manual. The owner’s manual will contain a readable and scaleable graphic outlining the bar size, as well as the corresponding replacement bar numbers and compatible chain models.
To find the owners manual, visit stihl. com, go to the “Maintenance” section, and then to “Manuals. ” As an alternative, you can locate a printed version of your owner’s manual at any Stihl distributor near you.
You can also determine the size of the bar on your Stihl chainsaw by physically measuring it. Using a ruler, measure the bar from the end of the nose sprocket to the end of the bar, in millimeters (mm).
This will give you a better understanding of what size chain and replacement bars you should be looking for. As a reference, standard sizes for Stihl chainsaws are: 8 inches (200 mm), 10 inches (250 mm), 12 inches (300 mm), 16 inches (400 mm) and 20 inches (500 mm).
Be sure to reference the owner’s manual to confirm the size of the bar. Lastly, the bar size is typically printed on a sticker on the powerhead next to the Stihl logo.
Selecting the right sized bar for your Stihl chainsaw is essential for safety and performance. Too large of a bar may cause damage to the saw and will create greater kickback if the chain happens to hit an obstruction.
If the bar is too small, it could cause the chain to jam and bind up during operation. Knowing the size of the bar is essential to keeping your Stihl chainsaw running safely and efficiently.
What size bar can you put on a Stihl ms170?
The size of the bar that you can put on a Stihl MS170 chainsaw depends on the model of the chainsaw you have. Generally, the MS170 series of chainsaws come with 16″ or 18″ bar sizes pre-installed. However, depending on your model, you may be able to use a bar up to a 20″ size.
It’s important to check the manufacturer’s specifications to make sure that the chainsaw is able to accommodate the larger size before installing a new bar. If you install a bar that is too large, it could affect the performance of the chainsaw and potentially cause damage.
How much is a Stihl MS 881 cost?
The price of a Stihl MS 881 will vary depending on where you purchase it and where you live. Generally speaking, you can expect to pay anywhere between $900 and $1200 for a new Stihl MS 881. Prices will vary a lot depending on the upgrades you choose, such as an automatic chain brake, the type of cutting bar, the engine size, and any additional accessories like a chainsaw sharpening kit.
You may also be able to find more affordable used Stihl MS 881s, so if you’re looking to save money, it’s definitely worth checking out second-hand options.
Do Oregon bars fit Stihl saws?
Yes, Oregon bars fit Stihl saws. Oregon bars are designed to fit most major brands of chainsaws, including Stihl saws. Oregon bars use a patented bar-mounting system that allows for fast and easy installation and removal.
This proprietary system uses the same sprocket-nose shape on the bar that nearly all chainsaw manufacturers use. This helps ensure compatibility with all major brands like Stihl, Husqvarna, Echo, Jonsered, Dolmar, Poulan, and others.
Oregon bars are available in different sizes so you can find the right bar for your Stihl saw. Additionally, each bar is machined to precision tolerances and is accompanied by a bar-mounting hardware kit that includes a bar-mounting nut, washers, and tensioners.
With an Oregon bar you can expect reliable performance and superior cutting power.
What is the longest bar Stihl makes?
The longest bar Stihl makes is a 59 inch Rollomatic E bar, which is designed for a chainsaw with up to a 7.0 horsepower engine. This bar is made of three individually-welded segments of high-grade steel and features Stihl’s exclusive captive nuts to eliminate lost nuts and bolts.
Additionally, the 59 inch Rollomatic E bar features a special top plate designed to reduce kickback, along with an increased oiling rate to help maximize bar and chain life. The bar is designed to easily handle the professional logging of big trees, as well as popular all around logging applications like bucking and limbing.
What do the numbers mean on a Stihl chainsaw bar?
The numbers that are printed on a Stihl chainsaw bar indicate the length of the bar. This is important because it helps determine the size and power of the saw as well as the kind of work it can do. A longer bar can generally accommodate a larger, more powerful saw, whereas a shorter bar is usually used on a smaller, less powerful saw.
The length of the bar is usually measured in inches, although there may be some variations and other measurements depending on the saw. The numbers printed on the bar may also contain other information such as the pitch and gauge of the chain on the bar, as well as the part numbers, gauge widths, and other special features.
Generally, the first two or three digits indicate the length of the bar, so a bar with a number of “12″ would indicate a bar that is 12 inches in length.
How do you read a chainsaw bar number?
Reading a chainsaw bar number is actually quite straightforward. The bar number is typically etched into the side of the bar or stamped, and it’s usually followed a series of numbers or letters. Typically the first two or three digits are the bar’s width, or “gauge,” which is measured in millimeters or inches depending on the chain’s brand.
The digits following the width indicate the chain’s pitch, or the distance between the links, which is typically a number such as 0.325 or 3/8. The remaining numbers indicate the chain’s type and length, which is measured in inches.
For example, a chainsaw bar number of 2063SPD009 would indicate a bar with a width of 20 mm or 0.75 inches, a pitch of 0.63 inch, and a length of 9 inches.
How do I know my chain size?
To determine your chain size, you will need to know two important measurements: the number of teeth (known as the chainring size) on the largest front chainring and the number of teeth (or cog size) on the rear cassette largest cog.
The combination of these two measurements will determine your chain size.
In general, if you have a single-speed (one chainring on the crankset) or a double-crank (two chainrings), you will need a 1/2 x 1/8″ chain. If you have a triple-crank (three chainrings), you will need a 3/32″ chain.
If you have a combination of a double-crank and a Shimano rear derailleur (with the cogs on the rear cassette), you will need a 1/2 x 3/32″ chain.
To determine your chain size, you will measure the teeth count on the front chainring and the rear cassette. The chain size is determined by the combination of both measurements. Make sure to match the measurements exactly as they are listed to ensure your chain size is correct.
What size file do you use on a 3/8 chain?
The size file you would use on a 3/8 chain depends on the pitch of the chain. If the chain is a 0.325 pitch, use a 3/16 inch round file; if the chain is a 0.404 pitch, use a 7/32 inch round file; and if the chain is a 0.
063 pitch, use a 3/16 inch flat file. It is important to ensure you select the correct size file for the chain pitch, as using the incorrect size can damage the chain. Be sure to use a round file for round-ground chains, and a flat file for flat-ground chains.
It is also important to know that some 3/8 chains are low-profile, so you will need to use a file specific for this type of chain. For a full list of file sizes for all types of chains, check your chainsaw manual or refer to a guidebook.
How is guide bar length measured?
The length of a guide bar is measured from the tip of the nose where the cutting chain contacts the wood, to the end of the bar where the chain exits. The goal is to make sure the guide bar is the proper length for the chainsaw and the task it is being used for.
The size of the bar and the type of chain on the bar will determine what length should be used. Generally speaking, the longer bars increase cutting speed but can cause more kickback. Therefore, it is important to choose the correct length of guide bar.
For chainsaw operators, the guide bar length is usually expressed in inches. For instance, a 14-inch guide bar would fit a 14-inch chainsaw, while a 16-inch guide bar would fit most 18-inch chainsaws.
It is also important to remember that the size of the cutting chain also needs to be taken into consideration and should be matched to the guide bar length.
In order to properly measure the guide bar length, it is best to measure from the nose to the tail. This should be done with a ruler or measuring tape, and then double checked to ensure accuracy. Additionally, it is important to make sure that the bar is clean and free of debris, as this can affect the size of the bar and the performance of the saw.
How do you measure the length of a Stihl chainsaw?
Measuring the length of a Stihl chainsaw is fairly easy. First, you need to determine what type of Stihl chainsaw you have as the size selection varies. 14″ to 16″ saws, 18″ to 20″ saws, and 24″ to 36″ saws.
Once you have determined the type of Stihl chainsaw you have, you can use a tape measure to measure the length. Be sure to include the full length of the saw, including any extra pieces, such as the handles and power cord.
To get an accurate measurement, take the measurement from the tip of the nose of the saw to the furthest back point, which should be of the power cord. If you are having trouble getting an accurate measurement, you may want to use an object such as a ruler to ensure the measurement is taken accurately.
What do Stihl bar numbers mean?
Stihl bar numbers refer to the length of the bar that mounts onto the chainsaw which is measured in inches. For example, a Stihl bar numbered 16 means that the bar is 16 inches in length. The longer the bar, the more power is transferred from the motor and the longer cutting swath or path the chainsaw can make.
When choosing the correct Stihl bar number for your chainsaw, it is important to determine the power of your motor, or engine, and your general needs for the job. A longer bar will be heavier and may cause the chainsaw’s motor to labor if it is not sufficiently powered, but if your motor is sufficiently powered, a longer bar will allow for a larger cutting swath, which can make it easier to perform large jobs more quickly.
It is important to consider the job you’re undertaking and the power of your motor before determining the appropriate bar number in order to get the right balance between power and efficiency.
How many drive links in a 18 inch chainsaw?
Generally, a standard 18 inch chainsaw will have around 100 drive links, although this may vary depending on the manufacturer, model and type of chain. Drive links are the small metal loop components that attach the chain to the chainsaw’s drive sprocket, the small wheel at the back of the chainsaw that propels the chain around the bar.
What is the difference between .325 and 3/8 chain?
The difference between. 325 and 3/8 chain is the size of the drive link. The. 325 chain has a drive link size of. 325 inches, while the 3/8 chain has a drive link size of 3/8 inches. This difference in size has implications for the size of the bar and sprocket that the chain can be used with.
Generally, the 3/8 chain will be too large to be used with a. 325 pitch bar or sprocket, while the. 325 chain will fit over a 3/8 pitch bar or sprocket. Additionally, the. 325 chain is thinner than the 3/8 chain, so the 3/8 chain has the ability to carry more power for a given length of chain.
For general purpose chainsaw use, most people use the. 325 chain because it is smaller and lighter.
How big of a tree can a 20 inch chainsaw cut?
A 20 inch chainsaw can handle logs up to about 24 to 28 inches in diameter and about 15 to 20 feet in length, depending on several factors such as the type of tree, the type of chainsaw being used, the skill of the operator and the condition of the chainsaw.
For very large trees that exceed these dimensions, it is best to hire a professional with the necessary equipment.
What chainsaw pitch is best?
The best chainsaw pitch depends on the type of work you plan on doing with it. If you’re using the chainsaw for light work around the home, such as trimming branches, then a 3/8 inch low profile chain is generally best.
This chain has a low kickback and is easy to sharpen or replace. However, if you’re using the chainsaw for heavy work like cutting down trees, then a 3/8 inch or 3/8 inch racing type chain is the way to go.
The bigger the saw, the bigger the pitch – so if you’re using a larger saw such as a 28”, then a ripping or full-comp chain is the best one for the job. This type of chain has more teeth and cuts more efficiently.
Be sure to consult with your local chainsaw professional to get the advice and help you need in order to find the best chainsaw pitch for your project.
Do number of drive links matter on chainsaw?
Yes, the number of drive links does matter on a chainsaw. They are sized according to the length of the bar, usually measured in inches or centimeters. Drive links are the metal pieces that connect the cutting chain’s links together and provide a pathway for the power from the motor to be delivered to the cutting chain.
The number of drive links directly affects the cutting power and performance of the machine. Too few links can cause the chain to lose tension and not cut correctly, while too many links can make the chain stretch, resulting in a loss of power and slower cutting.
A properly sized drive link will ensure that you get the best performance out of your chainsaw. When replacing a chain or bar, look for the number of drive links on the old chain and use the same number when you buy the replacement.
Many chainsaw specifications will also indicate the number of drive links you need for a particular bar length. You can also refer to the manufacturer’s instructions for specific information.