When choosing what size of mini blinds to buy, several factors should be taken into consideration. First, you should measure the window or door space you intend to cover. Measure the width of the window at three different locations (top, middle, and bottom), and the length of the window at three different locations (left, middle, and right).
Use the smallest width and the longest length measurements to determine the overall size of the mini blinds. Once you have this measurement, you should remember to add 5-6 inches to width and 3-4 inches to the length to allow for installation.
This will ensure that the blinds fit properly within the window space.
You can also consider the further away from the window pane the mini blinds are mounted, the more privacy the blinds will give you. As a result, you should factor the mounting depth into the measurements when selecting the size of your mini blinds.
The type of window opening is also important to consider when choosing the size of the blinds. If it is a sliding door, for example, you will need the length to be measured more accurately since a sliding door usually has more glass area to cover.
Finally, there are many different widths of slats available, so you should determine which size best suits your needs. Smaller slat widths are more suited to narrow windows and larger slat widths are more suitable for wider windows.
This also allows you to control the amount of light that filters through the mini blinds.
By taking all of these factors into account, you will be able to determine the exact size of mini blinds that suit your needs and will fit properly within your window space.
How much smaller should blinds be than window?
The size of blinds relative to the window size depends on a variety of factors such as personal preference, the size of the window, the purpose of the blinds, and the type of blinds being used. Generally, blinds should be narrower than the window frame by 1 to 2 inches on each side.
This allows for the blinds to sit flush against the window frame when shut and prevents them from getting jammed due to the window edges.
In addition, it’s important to consider the overall size of the room and the desired light levels when selecting the size of the blinds. You may want to go for a larger blind width if the room is large and room darkening is desired.
For smaller rooms, a smaller blind width may be sufficient, especially if the main purpose for the blinds is for decorative purposes.
Taking all these factors into consideration, the size of blinds should be 1 to 2 inches narrower than the window frame. This allows for the blinds to sit flush against the window frame when closed without leaving gaps that could let in too much light.
How do you measure for replacement blinds?
Measuring for replacement blinds is not difficult; however, it is important to get the measurements correct to ensure that the blinds you order fit perfectly in the window. The steps to accurately measuring for blinds are as follows:
1. Measure the exact width of the window frame inside the window casing, from one inside edge to the other, using a metal tape measure. This is the inside width.
2. Measure the exact height of the window frame from the top inside edge to the bottom inside edge. Most blinds are fitted at the top insdie edge.
3. Measure the depth of the window frame, or how far it protrudes into the room, in a perpendicular direction from the wall. Most blinds are fitted directly to the window frame, so this measurement is necessary.
4. When measuring for horizontal or venetian-style blinds, be sure to specify whether the blinds are to be mounted inside the window frame (inside mount) or outside of the window frame (outside mount).
The manufacturer will need this information to determine the size of the bracket, or the mounting hardware. If a flush or inside mount is desired, it is best to measure a minimum of one-half inch less than the width of the window opening, to ensure that the blind fits without being too tight.
5. Consider where you would like the operating cord for the blinds to be located. If it is desired that the cord hangs on the left side of the window when facing it, specify this when you place the order.
As the purchasing process for replacement blinds can be a bit more complicated than just grabbing them off the shelf, it is important to double check all of your measurements before placing your order to ensure proper fit.
Do blinds come in standard sizes?
Yes, most window blinds do come in standard sizes. The most commonly used size is a 24-inch width, which fits in most standard American windows that are 24 inches in width. However, there are a variety of sizes available, including wider sizes.
While the sizes range from a 20-inch width to 72 inches, the exact size of blind required depends upon the size of the window. Some companies offer custom sizing to ensure that the blinds they offer will perfectly fit any window size.
Multiple color and style options are available, so it’s possible to find the right blinds for your home, regardless of the window size.
How do you measure and install faux wood blinds?
Measuring and installing faux wood blinds is a relatively simple process that can be done in just a few steps. The first step is to measure the window to get the correct size for the blinds. Make sure to measure the width and the height of the window opening so you can pick the right size.
Once you have the measurements, make sure to add a few inches of extra space to ensure a proper fit.
Next, you’ll need to purchase the blinds, and make sure to double-check all measuring and hit specs, as well as verify they are the right size. Once you have the blinds, you’ll need to gather the necessary tools and materials, such as screws, a screwdriver, and a drill.
Depending on the size of the window, you may need longer screws.
When you are ready to install the blinds, you must drill the mounting holes into the window opening frames, making sure to keep the screw holes vertical. Make sure to attach the mounting brackets and the blind to the window with the screws.
Finally, attach the brackets to the slats and the blinds will be ready to use. Make sure to check that the brackets fit snugly; if the blinds are too tight, loosen the screws to adjust them. Make sure all the screws are securely tightened for a safe installation.
Can you measure old blinds?
Yes, it is possible to measure old blinds. First, measure the width from inside the window frame from left to right and note the measurement. Next, measure the height from inside the top of the window frame to the bottom, also noting that measurement.
Make sure to measure to the 1/8 inch from the smallest increments you can measure in order to be as accurate as possible. Taking these measurements will allow for any new blinds you purchase to fit in your window frame.
How do you measure a roller blind for an inside mount?
Measuring an inside mount roller blind is fairly simple. First, you need to identify the width and the height that you need so that the blind can fit properly inside the window frame. To measure the window width, use a steel measuring tape and measure the inside width of the window frame in three places (at the top, middle, and bottom) and record the shortest width.
For the height, measure from the top of the window frame to the window sill in three places (left, middle, and right) and record the longest height.
When ordering a roller blind, specify the exact width and height measurements including any deductions needed to ensure a decent fit. If your window isn’t rectangular, use the smallest width and height of the smallest rectangular area that the blind has to cover.
Make sure to include any deductions in your measurements; this will help the blind fit properly in the window frame without bunching or overlapping. It is also recommended that you measure the recess depth, as this allows the blind to fit snugly without the need for deductions.
Lastly, make sure to check for obstructions within the window frame (e. g. handles, or security bells) that might interfere with the installation of the blind before ordering. If you are unsure about any of these measurements, consult a professional installer who can measure and install the roller blind accurately.
What comes first width or height for blinds?
The order in which to measure width and height for blinds depends on the type of blinds you’re installing. If you’re installing inside-mount blinds, typically the first measurement you should take is for the width.
If you’re installing outside-mount blinds, the first measurement you should take is for the height.
For inside-mount blinds, you’ll start by measuring the exact width of the inside of the window frame where you are planning to install the blinds. Measure from one inside edge to the other, making sure to remove any obstructions such as trim pieces.
Record the measurement and add 3/8 of an inch to it for proper clearance. Repeat this process for the height of the window frame, making sure to note any obstructions such as trim pieces when measuring.
For outside-mount blinds, you’ll start by measuring the exact height of the outside of the window frame where the blinds will be installed. Measure from the top of the window frame to the bottom, making sure to remove any obstructions such as trim pieces.
Record the measurement and add 1 inch to it for proper clearance. Repeat this process for the width of the window frame, making sure to note any obstructions such as trim pieces when measuring.
When installing blinds, make sure to measure carefully and accurately. If you’re unsure of how to measure, consult the manufacturer’s instructions or contact a professional for help.
What is the most common window blind size?
The most common window blind size is 24 inches wide by 36 inches long. This size is popular because it fits most standard windows and can be used in bedrooms, bathrooms, kitchens, and other rooms. The size also fits panels that can be used for single window treatments or for those who need to cover two windows in the same space.
If two windows are side by side and are the same size, two 24″ x 36″ panels can easily be used. Window blinds come in a variety of sizes, from 16 inches all the way up to 72 inches and larger, and they can be customized to your specific window size if needed.
How do you measure window blinds width?
When measuring for window blinds width, it’s important to be as accurate as possible. Start by measuring the width of each window frame from inside edge to inside edge, at the top, middle, and bottom.
Record the smallest measurement, as it will be the width you use for ordering the blinds. If you are ordering from a standard sizes catalog, round the measurements down to the nearest whole inch. If you are having the blinds custom made, provide the exact measurements.
For an inside mount, you will need to also measure the depth of the recess. Subtract 1/2 inch from the depth measurement to make sure the blind will fit without any obstruction. Finally, double check your measurements to ensure precision.
How are Venetian blinds measured?
Venetian blinds can be measured in three different ways: width, drop, and slat size.
Width: The width of the blind is measured from side to side of the window, including the bracket and controls.
Drop: The drop is measured from the top of the headrail to the base of the bottom rail, once the strings and fittings have been attached.
Slat size: The slat size is measured from the top of the lad to the bottom of the blind’s slat when it’s in the down position. It’s important to take the slat size into account when measuring your blinds; if they’re too thin, they may not be able to block enough light, while thick slats could be too heavy for the structure.
In addition to measuring the blinds themselves, it’s important to also measure the window frame. This will help you determine the right fit for the window, and ensure that the blinds are properly installed.
Measuring the window frame will also help you to get an idea of the amount of light that can pass through the window when the blinds are closed.
Do you measure replacement windows from the inside or outside?
When measuring for replacement windows, it is best to measure from the inside of the window opening. This is because the size of the opening is typically smaller than the size of the window. If you were to measure from the outside, you could end up with a window that doesn’t fit the opening, which will cause time and money to be wasted in window installation.
It is important to measure length and width in 3 different places to make sure you have the correct measurements. Measure from the inside of the window to the inside of the window in each direction about 6 inches off the surface for best accuracy.
Make sure to check the measurement in each corner and the center of the window. Additionally, measure from the head of the window (the top of the window) to the finished floor to ensure the new window does not block any woodwork and molding.
Once you have the measurements, double-check everything for accuracy. Adding 1/8 of an inch to both the width and height to make sure the window will fit would be a good idea. Remember, it’s easier to make a window bigger than smaller, so it is a good idea to go with the measurements of the smallest dimension.
Are replacement windows smaller than original?
Replacement windows are typically smaller than the original windows, depending on the size of your window and exact measurements of the area where the window will be placed. Window replacements typically require smaller window measurements since they will be placed and secured into pre-existing window frames, making it necessary to reduce the overall size of the window.
If the area you are placing the window in is larger than the window you choose, you should consider asking a window expert to provide an estimate for a custom-sized window.