When buying staples for a staple gun, it is important to select the correct size and type of staple for the material you are stapling. The type of staple needed is determined by the thickness and hardness of the material.
Generally, for thin, soft materials such as paper or thin fabric, a thin wire staple or thin leg staple is required; for thicker, hard materials such as wood, a thick wire staple or thick leg staple is needed.
Additionally, the size of the staple must also be considered. For smaller projects, staples in sizes 6-12mm are ideal, while larger projects may need sizes larger than 12mm. It is also important to ensure that the staples you purchase are designed and manufactured to fit your specific staple gun model.
Taking all of these factors into consideration when buying staples can help ensure that your staple gun is used safely and effectively.
Do all staple guns use the same staples?
No, not all staple guns use the same staples. There are different types of staple guns, and each one is designed to work with a particular type of staple. Common staples used in staple guns include narrow crown staples, wide crown staples, and cable staples.
Narrow crown staples are typically used for finish carpentry, U-shaped upholstery staples, and woodworking. Wide crown staples are used for securing insulation, roofing felt and plastic sheeting. Cable staples are larger than the other staples, and are used for securing cables and wires.
In some cases, you may also need specialty staples for specific applications. It is important to always use the correct staple size and type when using a staple gun in order to ensure it works efficiently.
Are staples for staple guns universal?
No, staples for staple guns are not universal. Different types of staple guns require different sizes and shapes of staples. For example, a heavy-duty staple gun usually requires larger staples compared to a standard or light-duty one.
Also, each type of staple gun typically has staple sizes and shapes that are specifically designed for it. Some industry-specific staple guns even require specially-shaped or -sized staples, although these are less common.
To make sure you get the right type of staples for your stapler, it’s best to read the user manual for your specific staple gun or consult a professional.
Are T50 and 140 staples the same?
No, T50 and 140 staples are not the same. Although they look similar, they have different sizes and are not interchangeable. T50 staples are 5/32″ in size, while 140 staples are 7/32″ in size. The size difference means that they have different applications.
T50 staples are designed for light to medium duty jobs and are mainly used with Duo-Fast and Arrow’s T50 staplers. On the other hand, 140 staples are designed for medium to heavy duty jobs. They are used with the 140 Series Duo-Fast and Arrow staplers and are suitable for jobs such as carpet padding, foam insulation, tar paper, and upholstery.
What size staples go in a staple gun?
The size of staples that can go in a staple gun vary based on the type of gun that you are using. Generally speaking, most staple guns use 4-8mm staples. Light-duty staple guns typically use 4-6mm staples, while heavy-duty staple guns can use 6-8mm staples.
Additionally, some staple guns are designed for specific staple sizes and may come with a separate set of staples for these sizes. It is important to check the specific instructions for the staple gun you are using to ensure that you are using the correct size staples.
Are there different sizes of staples?
Yes, there are different sizes of staples. Depending on the application, staples can be found in a variety of sizes, from teeny tiny to very large. Smaller staples are typically used for basic home and office tasks such as applying documents or pieces of paper, while larger sizes are typically used for heavier duty applications, such as securing tarps, upholstery, and canvas or landscaping applications.
Many staple guns come with adjustable settings so you can choose the size of the staple you want to use. In addition, many different shapes are available such as triangles, squares and circles for more specialized uses.
How do you fix a stapler that won’t staple?
If your stapler is not stapling properly and you want to fix it, there are several things you can try.
First, you should check the staples themselves to ensure they are not too old or bent; if they are, replace them with new ones. If the staples appear to be in good condition, you should make sure the stapler has been loaded properly; if it hasn’t, reload it with fresh staples.
You can also use a small object, such as a paperclip or tweezers, to clear out any obstructions from the anvil or opening mechanism. Additionally, if your stapler has a built-in opener, check to make sure it is functioning correctly and not interfering with the stapling process.
If these basic troubleshooting steps do not work, it may be time to disassemble the stapler. Begin by loosening the hardware screws on either side and then slide off the casing. Once the casing is removed, you can clean the inside with a damp cloth and compressed air.
Also, check to make sure the coil spring and plunger are in good condition and not stuck. While reassembling the stapler, make sure the staples are properly positioned and aligned. After the stapler is reassembled and loaded with fresh staples, test it out to see if the stapling issue has been resolved.
If these steps do not solve your stapler issue, it may be time to replace it with a new one.
Why would a staple gun not work?
A staple gun is a handheld machine that is used to drive metal staples into a variety of different materials, ranging from cardboard and fabrics to wood and plastic. Although these tools can be incredibly useful and are able to fasten objects together securely, there are various reasons why a staple gun might not work.
The first issue could be a lack of power. Most staple guns rely on manual or electric power to make them work, and if the device is not adequately powered then it might not work correctly. This could be due to a dead battery, or a faulty power cable.
The second issue is the staples themselves. If the staples have become bent or worn down they may not stay in the staple gun when they are fired, which means that they will not drive correctly into the material.
Furthermore, if the staples are too short, or the wrong type for the gun, then this could stop the tool from working.
Another issue could be the material being used. Some materials, such as fabrics and carpet, can be quite hard to penetrate with a staple gun and the gun may not be able to create the pressure necessary to drive the staple.
Finally, if the staple gun is faulty or damaged in any way then it is likely that it will not work. This could be due to a broken spring or an issue with the trigger mechanism.
In conclusion, there are various reasons why a staple gun might not work, such as lack of power, faulty staples, the material being used and a faulty gun. Therefore, it is important to ensure that the staple gun is adequately powered, supplied with the right kind of staples, used on the right kind of material, and checked regularly to make sure it is in good working order.
How do I get my staple gun to work?
To get your staple gun to work, you will need to make sure you have the right staple ammunition. Ensure you purchase the correct staples size for your staple gun, as the wrong size ammunition will jam the gun and won’t shoot.
When you are ready to use the staple gun, position the material you are working on between the anvil and nose of the gun. Push down on the handle firmly to ensure the staple has entered the material without going through the other side.
When you feel resistance, the staple has been fired. To adjust the staple gun for different material depths, you can use the depth of drive adjustment feature, which is located at the back of the gun.
This will help you adjust the firing power of the staples you are using, so that they do not penetrate too deep into the material. Once you have adjusted the firing power to the appropriate setting, you can now begin to staple your material.
After you are done with each staple, make sure you rotate the gun barrel located behind the handle to load the next staple ready to fire.
How do you fix a jammed staple gun?
To fix a jammed staple gun, the steps you need to take are as follows:
1. Unplug the staple gun from its power source, if applicable. If there is no power source, ensure that the power has been turned off or the fuse has been removed.
2. Remove the floor plate, often by unscrewing the screws that hold it in place.
3. Depending on the type of staple gun you have, you may have to remove the spring as well. If so, you will need needle-nose pliers to do this.
4. After removing the spring, pull back on the trigger handle and remove the jammed staple. Once it is removed, you can reinsert and return the spring if necessary.
5. Reattach the floor plate, and screw it back in with the appropriate sized screwdriver.
6. Reconnect the power source or fuse, plug the staple gun back in, and test to make sure it is operational.
7. Proceed with using the staple gun as normal.
Why is my staple gun not shooting staples?
First, you should make sure the gun is loaded properly. Many staple guns use a strip of staples, which must be loaded and inserted into the gun correctly for the staples to be properly delivered. If the strip of staples was not loaded properly, or if the staple strip has been used up and needs to be replaced, this could be the reason the staple gun is not shooting staples.
Another potential issue is that the gun’s spring tension may need adjusted. Certain staple guns require the user to adjust the tension of the spring before use. If the tension is set too low, the staples may not be delivered properly.
Refer to the user manual to determine if your staple gun needs its spring tension adjusted before use.
Finally, the gun may need to be calibrated. Over time, staple guns may become misaligned, which can cause them to stop working correctly. Again, refer to the user manual to determine the best way to calibrate your particular staple gun.
If your staple gun still does not work after checking the above potential issues, it may need to be professionally serviced or replaced.
How do you unjam a heavy duty stapler?
If you have a heavy duty stapler that is jammed, the first step is to check for visible paper jams and make sure that the stapler is correctly loaded with staples. Next, open up the stapler and manually remove any jammed staples or pieces of paper that may be blocking the movement.
Be sure to check for any visible staples around the edges and tilt the stapler or use a flashlight to look inside. If possible, remove the back of the stapler to get to the difficult spots. Remove any additional jamming materials, being careful not to push them further inside the stapler.
Once all the material has been cleared, use a flat-head screwdriver to press down gently on the metal metal spring mechanism (the part responsible for the heavy duty stapling). This should help the stapler to reset.
You should then be able to test the stapler by firing off a few sheets of paper.
If the stapler is still jammed, try lubricating the rail and jamming materials to help with the stapling motion. If the stapler is still not working despite your best attempts, it is likely time to replace it.
How do you fix a stuck Swingline electric stapler?
If your Swingline electric stapler is stuck, the first step is to check the power switch on the side of the stapler. If the switch is in the on position, try unplugging the stapler, waiting for about 30 seconds, and then plugging it back in.
If this does not work, you can try gently tapping the top of the stapler, as this may dislodge any stuck pieces.
If the stapler is still not working after these steps, it is possible that you may have jammed or broken parts inside. You can open the stapler’s back cover and remove any jammed paper and staples. If you do not see any jammed material, it is possible that you need to purchase a new staple bar or a replacement part.
If you can identify the exact part that needs to be replaced, you can contact Swingline directly or purchase the part online.
If the stapler’s motor still is not working after you have taken the above troubleshooting steps, it is best to contact Swingline directly and ask them to troubleshoot the issue.
Are Bostitch and Swingline staples interchangeable?
The answer to this question is “it depends. ” Generally, it is possible to use Bostitch and Swingline staples interchangeably. However, it is important to note that they are not necessarily designed to be a perfect match; the length, size, and shape of staples made by different manufacturers may be slightly different.
For this reason, the two varieties may not be compatible with staplers from the same manufacturer. If you are attempting to interchange Bostitch and Swingline staples, it is best to try out a few to ensure that they actually fit into the stapler of your choice and are secure when applied.
It is also important to note that some staplers may be able to use staples from multiple brands, while others may only be able to use certain products from a certain brand. Therefore, it is important to check your specific stapler beforehand to determine if it can accept staples from both brands.
What do the staple sizes mean?
Staple sizes are measurements of staples used for binding documents. The specific measurements of each size depend on the staple manufacturer, but generally correspond to the size of a particular wire gauge creating them.
The size range of staples typically used for office and document binding are, numbered in US Standard measurements, are 23/6, 23/8, 23/10, 23/12, 23/15, and 23/20.
A 23/6 size staple is one of the smallest staple sizes available, named so because it is composed of 0.23 inch legs and 0.6 inch in crown width. This size staple is only recommended for light duty stapling and is commonly found in staplers that are built into machines, such as desks and tables.
The 23/8 size staple is also known as a ¼ inch staple and as the name suggests, it has 0.25 inch legs and a 0.5 inch crown width. This size is mainly used for light document binding and to secure light material like paper and thin plastics.
The 23/10 staple is a medium-sized staple typically used for binding reports and other documents that require heavier stapling. This size has 0.27 inch legs and 0.5 inch crown width. It is the standard size for most office staplers.
The 23/12 size staple is a bit bigger than the 23/10 staple and is mainly used to fasten together upholstery and heavier fabrics. This size has 0.27 inch legs and 0.6 inch crown width.
The 23/15 staple is a heavy duty staple that has 0.29 inch legs and 0.65 inch crown width. This size is commonly used in construction, furniture making and to secure thicker materials.
The 23/20 staple is the largest staple available and is specifically designed to fasten large piles of documents. This size has 0.32 inch legs and 0.8 inch crown width. It is recommended for use with an electric stapler as manually stapling a large number of sheets can be difficult.