Making your ceiling look like shiplap is a great way to add a rustic, cottage-style look to your home. The great thing about this project is that it’s relatively easy to do and doesn’t require much time or money.
To make your ceiling look like shiplap, you will need some supplies and tools.
You will need:
• Plywood panels
• 4-inch or 6-inch nails
• Hammer
• Table Saw
• Miter Saw
• Tape measure
• Pencil
• Level
• Stud Finder
• Drill
• Sander
First, you will want to measure the ceiling you want to cover and then mark off the same measurements on the plywood. You will then want to cut the panels to size. If you are not comfortable cutting the wood on your own, you could hire a professional to do it for you.
Next, you will want to use the stud finder to locate the studs on the walls and mark each one with a pencil. After you mark each stud, use the 4-inch or 6-inch nails to attach each panel to the wall.
Start from the top and make sure you hang the panels in a straight line, using the level to adjust for accuracy. Once the panels are secured, use the drill to fill in any gaps.
After the panels are in place, use the sander to sand down any rough spots or edges. You can finish the ceiling with either a white or gray paint to give the shiplap an authentic look.
Creating a shiplap ceiling is a relatively simple project that can provide your home with an elegant and rustic look. With the right tools and supplies, you can make your ceiling look like a stunning piece of art.
Does shiplap look good on ceiling?
Shiplap can definitely look great on a ceiling! The popular wood paneling can give any room a cozy, rustic feel, and is a great way to add dimension and texture to your ceiling without the need for any complicated or difficult installation.
However, it is important to bear in mind that shiplap is not the ideal ceiling finish for all room types. For a more formal or modern design scheme, a flat drywall finish may be preferable. If you do decide on shiplap for your ceiling, be sure to use a properly sealed material so that it is adequately protected from moisture and humidity.
Additionally, using a protective finish on the wood can help keep it looking fresh and new over time. With the right design and installation, shiplap on a ceiling can be a great way to create a warm and inviting atmosphere in any home.
How do I build a cheap shiplap ceiling?
Building a cheap shiplap ceiling is possible with a little bit of research and creativity. First, you’ll want to determine what type of wood you want to use—it could be plywood, hardwood, or even laminate.
You may also want to consider the size of plank that you want to use, as well as the type of finish—this could be paint, stain, or even a special finish such as whitewash.
Next, you’ll need to measure the area where you’ll be installing the shiplap ceiling. You’ll want to make sure that you accurately measure the width and height of the space, as this will help you determine the correct size of plank that you need to get.
Once the planks are purchased, you’ll want to attach them to the ceiling. You can either nail the planks in place or use some type of construction adhesive. It’s important that the planks are even and level, as this will ensure your shiplap ceiling is properly installed.
Finally, you can finish off the shiplap ceiling with a desired paint or stain. If you’ve opted for a special finish, such as whitewash, you may need to apply the whitewash with a brush or roller. Once the finish has dried and cured, you’ll have a beautiful new shiplap ceiling.
Can you shiplap over drywall on ceiling?
Yes, you can shiplap over drywall on the ceiling. It is important to consider a few key steps before taking on this project, however. First, you will need to make sure the drywall is in good condition and securely attached to the ceiling joists.
If there is any sagging or loose pieces, then those should be repaired or replaced first. Next, it is important to use a leveling tool to ensure that the shiplap pieces are installed in a level position.
Depending on your specific drywall, you may need to attach a layer of wood or metal furring strips to the drywall first, on which the shiplap can then be attached. This helps ensure that the pieces are secured fully, as screws and nails will penetrate the furring strips into the joists below.
Finally, use caulk and paint to give the finished product a fully sealed and finished look. Knowing these key steps will help ensure the shiplap is installed correctly and securely on the ceiling.
Is it cheaper to drywall or shiplap?
It depends on the size of the wall, the materials required, and the labor costs for each job. Generally speaking, drywalling is cheaper than shiplapping, as it requires fewer materials and typically has less labor costs if you are using modern, prefabricated drywall sheets.
If you are installing shiplapping, you typically need to find and piece together individual boards, resulting in higher materials and labor costs. In addition, you might need to rent a tool such as a saw or a nail gun to install the shiplapping, adding to the costs.
Ultimately, it’s best to consult a professional to get a better idea of which method is right for you and your budget.
What should I put behind shiplap?
It depends on the desired look you want to achieve. If you want a more traditional look, you can put wood planks behind your shiplap, painting them in a complementary color to the shiplap. Additionally, a beadboard panel can provide texture and depth and can be painted to match the shiplap.
If you want a more modern look, you can install a wallpaper, veneer, or paneling behind the shiplap to create depth and texture. Alternatively, you could accentuate the shiplap with color by adding a paint-grade panel, a large piece of artwork, or a bold contrast color.
Regardless of the type of material you choose, make sure it fits within the overall aesthetic of your space for a beautiful, cohesive design.
Do you need furring strips for shiplap?
Furring strips are not typically needed when installing shiplap. Shiplap is generally installed by nailing directly into the wall studs, so furring strips are not necessary. However, if the wall is uneven or you want to create a gap between the shiplap and the wall, then furring strips can be used.
Furring strips should be attached to the wall and then the shiplap should be nailed directly onto the furring strips. Depending on the material you are using for your shiplap, you may need to use nails, screws, or adhesives to attach it to the furring strips.
Installing the furring strips correctly is important for a successful shiplap project, so take care to make sure they are in line and level with the wall before you attach the shiplap.
What type of wood is used for shiplap ceilings?
Ship-lap ceilings can be made of many different types of wood depending on the desired look. Common options include pine, spruce, and cedar. Pine is the most popular choice for ship-lap ceilings, due to its versatility and affordability.
It is also widely available and often has a more rustic appearance. Spruce, although slightly more expensive, is known for its strength. It typically has a smoother, more refined look and may be a good option for homeowners who want a more formal look for their ceilings.
Cedar is the most costly of the three options and is known for its durability and resistance to rot. It is popular among homeowners due to its natural beauty and can add a unique touch to any space.
How much does a shiplap ceiling cost?
The cost of a shiplap ceiling typically depends on the quality and quantity of materials used, as well as the size of the room and labor costs. For a 120 sq. ft. room, the cost of materials can range from about $210 for quality knotty pine shiplap to more than $1,000 for composite materials such as LVL.
The total cost of a shiplap ceiling is highly dependent on the quality of materials selected, the amount of labor required, discounts negotiated through bulk purchasing, and any applicable taxes or delivery charges.
On average, the total cost of a shiplap ceiling can range from $325 to $1,500.
How thick should shiplap boards be?
The thickness of shiplap boards will depend on the type of material you are using, as well as the purpose you are using it for. For example, a very thin material, such as plywood, could range in thickness from 1/16” to 1/8” and is typically used for wall cladding.
Whereas a thicker material, such as solid pine or oak, could be up to 1-1/2” thick and used for flooring or furniture making. Most builders tend to opt for a shiplap range of between 3/4” – 1” for a standard wall covering as this is thick enough for most construction but not too thick that it becomes too cumbersome.
It also provides a nice finished look that is not too overpowering.
Can I use 1×4 for shiplap?
Yes, you can use 1×4 boards for shiplap. Generally, 1×4 boards are used over 1×6 boards because they are thinner and cheaper. 1×4 shiplap boards create a wider gap between the boards compared to a 1×6 board, which creates a tighter gap.
You can also use 1×4 boards to create a more country feel than the modern look of a 1×6. The downside of 1×4 boards is that they can be fragile and can easily split when nailing them up, so be sure to use pre-drilled pilot holes and the proper nail size for the project.
The cost and ease of installation, paired with their rustic look make 1×4 an ideal option for shiplap walls.
How wide is 8 inch shiplap?
8 inch shiplap typically ranges from 6-7 inches in width. The sizing of shiplap can vary from brand to brand, but the most common sizes can range from 4-12 inches. Shiplap is consisting of boards that are usually about ⅜ inch thick.
8 inch shiplap will typically overlap by roughly a ½ inch when installed correctly, creating a lap look that is used in many home designs.
Does shiplap make room look bigger?
Shiplap has become a popular design feature, due to its natural and rustic look. It can be used for interior walls, siding, or even for furniture. When used in a room, shiplap can make it appear larger, but it depends on how it is installed, the color of paint applied, and how it’s accessorized.
Vertically installing shiplap can create the illusion of higher ceilings by drawing the eye up. This works especially well in rooms with ceilings around 8 feet or lower. If a darker paint color is used, it will create a bold, warm atmosphere and bring focus to furniture and art, while making the room feel like it’s not cramped.
When installing shiplap with a horizontal plank pattern, opt for a light paint color like a pastel blue or grayish white. The light color combined with the seams around each piece of wood visually opens a room and creates a timeless aesthetic.
The subtle seams will also draw attention to the wall, making the area look more distinctive than typical drywall.
Using bright-colored accents throughout the room will also add visual interest, making it appear bigger. White furniture and bright accents like colored throw blankets or pillows will brighten a room and ensure the shiplap is a prominent feature.
Additionally, a large, statement wall mirror can break up the monotony of the painted wood and add the illusion of more space. Style the shiplap in a way that creates balanced placements of lighting and furniture, which in turn creates an even, spacious look.
Is shiplap timeless or trendy?
The answer to the question of whether shiplap is timeless or trendy depends on personal preferences and opinions. Some people may consider shiplap to be a classic look that can last for many years, while others may view it as a more modern and trendy style of wall cladding.
In terms of its design, shiplap is typically a white-painted wood that creates a textured, wood-plank look on walls. This look can range from minimalist and modern to rustic and traditional. It can be used on both interior and exterior walls and gives the room a unique, yet classic flair.
Overall, shiplap has been around for centuries and can be found in many old homes and barns. It has also gained more popularity recently, especially in home improvement projects. Whether you consider it timeless or trendy, there’s no denying that shiplap provides an attractive and durable look to any home.
Are shiplap walls out of style?
That’s a difficult question to answer because style is subjective and trends come and go. Shiplap walls, which are traditionally made from horizontal boards with a gap between each board, have become quite popular in recent years.
In particular, they have been popular among those who love farmhouse style decor and look for inspiring ways to make their homes similar.
However, it’s hard to say for sure if shiplap walls are officially “out of style” yet. Trends come and go and some may believe that the popularization of shiplap walls has led to an overuse and that in turn will lead to a decrease in popularity.
However, since the popularity of shiplap walls has not seen a significant decrease in recent years, it’s likely that they will stay in style for years to come.
Ultimately, whether or not shiplap walls are out of style comes down to personal preferences. While some may love the look of shiplap walls, others may opt for different types of walls or wall coverings in an effort to keep their homes looking up-to-date.
It’s really up to each individual to decide if shiplap walls work for their taste and their style.
Is shiplap considered modern?
The answer to this question depends on your interpretation of modern. While some people might consider shiplap to be a traditional design element, as it has been used for centuries to construct nautical ships and walls within homes, others might consider it to have a more modern aesthetic.
For example, many modern homes now feature shiplap on the walls as an accent. Its use in modern interior design often adds a rustic, cottage-style look that can make a space feel cozy and inviting. Ultimately, it’s up to you to decide if shiplap fits within your idea of modern, and what kind of look you’re seeking for your home.
Why is shiplap so popular?
Shiplap is a type of wooden board that is present in many homes, and it has become significantly more popular over recent years. The distinctive look of this woodgrain board has been featured in home decor, interior design, and in popular television shows like Fixer Upper.
There are a number of reasons why this type of board has been so popular.
First, shiplap is incredibly versatile and it can be installed both horizontally and vertically. This allows homeowners to create unique and interesting wall designs. Shiplap is also incredibly durable and will last for a long time.
It is relatively cheap and easy to find, which makes it an excellent choice for people who may be on a budget but still want to add style to their homes.
In addition to the practical aspects, shiplap is also aesthetically appealing. It has a classic, timeless look that is often associated with farmhouse, cottage, or coastal styles. It can be used in a variety of settings and it is currently very fashionable.
People like the versatility and simplicity of shiplap and its ability to make a house look warm and cozy.
Why does Joanna Gaines use so much shiplap?
Joanna Gaines has become well-known for her signature style of decoration, which often includes the use of lots of shiplap. Shiplap is a type of wooden board with a rabbet groove cut in each edge, allowing it to fit together snugly, creating a tight-fitting seal.
This is exactly what Joanna loves about shiplap—it’s a great way to bring a traditional style to any space.
Shiplap is often used as a sheathing material that can be applied directly to walls, ceilings, and floors, making it a popular choice for interior walls. Shiplap can be applied directly to a wall without any additional preparation such as plastering or painting and can easily be painted in any colour, texture, or hue.
Its affordability makes it appealing compared to other materials, so it’s often used in budget-friendly projects. Shiplap also adds texture and dimension to a space, which is why Joanna often uses it in her designs.
In summary, Joanna Gaines often uses shiplap in her designs because it is affordable, easy to install, and adds texture and dimension to a space.
What is taking the place of shiplap?
The “shiplap” look has been popular in many homes lately, but there are now several different materials taking its place that create a similar look but with different tile, stone, and wood textures. Some of the materials that are taking the place of shiplap are mosaics, porcelain tiles, glass tiles, and limestone.
Mosaics are becoming popular in kitchen backsplashes and bathrooms, providing a more modern look without the upkeep of traditional shiplap. Porcelain tiles also come in a variety of colors and patterns, and can be used as an accent wall or for a larger area like a kitchen.
Glass tiles are another great option and come in many unique textures that can create an eye-catching design. And limestone, a classic tile option, comes in various shades and hues, and can update any room in the home.
All of these choices create a smooth, modern look for any room and are a great way to update any home.