Pairing your Origaudio Sonosphere Bluetooth speaker is easy. First, make sure your speaker is powered on and in pairing mode. To put it in pairing mode, press and hold the power button on the speaker for 3-5 seconds until you hear a beep.
Then, locate the Bluetooth settings on your device. On most devices, this can be accessed through the Settings app. Once you’re in the Bluetooth settings, select Origaudio Sonosphere as the device you want to pair with.
You may have to enter a code to complete the pairing. When it is done, you will hear a confirmation sound from the speaker and you should be able to play music from your device. To unpair the speaker, press and hold the power button on the speaker for 3-5 seconds, or go back to the Bluetooth settings on your device and select “Forget this device”.
How do I pair my hive speakers?
To pair your hive speakers, follow the steps below:
1. Ensure that both hive speakers are powered on and in close proximity to each other.
2. On each speaker, press and hold the + and – Volume buttons for 3 seconds. The LED indicators will start to flash rapidly.
3. Once the speakers have finished connecting, the LED indicators will be paired in either a steady green or red light and the speakers will now be connected.
4. To adjust the music output, the volume control on one of the speakers will adjust the output on both.
5. To control playable sources, connect the source device into the source inlet on either of the hive speakers using the appropriate cable. The source will then be available to play over both speakers.
6. If you need to reset the speakers, press and hold the + and – buttons at the same time on both speakers until the LED stops flashing. The speakers will then be disconnected.
What is an Aquathump?
An Aquathump is a type of underwater sound system created by OyoSport that produces sound by vibrating water molecules. It works using a simple pump that propels vibrations through a small speaker, allowing underwater sound to be audible up to 15 feet away.
The Aquathump can be used in swimming pools, ponds, hot tubs and other bodies of water to transform your aquatic environment with music, speech and sound effects. It is designed to be used with waterproof headphones or floating waterproof speakers and a standard MP3 Player.
The Aquathump is a great way to enhance your swimming experience and create a more immersive atmosphere.
How to connect 808 speaker?
To connect 808 speaker, you will need an audio source with an RCA output port and an RCA-to-3.5mm adapter. You can then use a 3.5mm male-to-male cable to connect the audio source to the speaker. Once you have made the connections, you can adjust the settings on the audio source to the desired volume.
Additionally, make sure you have the correct power adapter and that the speaker is turned on.
Finally, you will need to adjust the individual volume levels on the speaker. This can be done by pressing the volume butting on the speaker’s control panel. Once you have adjusted the settings as desired, your 808 speaker should be ready to use.
How do I connect my Bluetooth transmitter?
Connecting a Bluetooth transmitter is relatively easy. First, plug the transmitter into an audio source such as a television, computer, or stereo using the appropriate cables. Once the transmitter is connected to the source, turn the device on and adjust any settings as desired.
Then, turn on the receiving device such as a speaker or headphones that have Bluetooth capabilities and make sure it is in pairing mode. The receiving device should detect the transmitter and be ready to connect.
If necessary, use your device’s menu to find the appropriate Bluetooth transmitter option and select it. Depending on the model of your transmitter, you may need to enter a specific passcode for the Bluetooth signal to be accepted.
Once connected, the audio signal from the source should be audible from the receiving device. If you have issues connecting, try restarting the transmitter and the receiver.
How do I put my Musibaby in pairing mode?
To put your Musibaby in pairing mode, you need to first turn on your device. Once the device is turned on, press and hold the power button for 3-5 seconds until the LED light indicator starts to flash.
Then open the settings page on your device and select “Bluetooth”. You should then be able to find and select your Musibaby from the list of available devices. Once selected and connected, your Musibaby will be in pairing mode and ready to be used with your device.
How do you know when Musibaby speaker is fully charged?
When the Musibaby speaker is fully charged, the indicator light will change from red (charging) to green (fully charged). Additionally, the speaker’s battery indicator on the connected device (e. g. smartphone) will also display as fully charged.
Depending on the connected device, you might also hear an audible alert when charging is complete. To make sure that it is charged, you can either reconnect the speaker to the device or press the button on the speaker to turn it on.
If the light is green and no charging is required, then the speaker is fully charged.
How do I set up my Musibaby?
Setting up your Musibaby is an easy and simple process. Firstly, use the provided AC adapter and plug it into a nearby power source. Then, locate the power button on the back of the device and press and hold it for 2 seconds until the indicator light illuminates.
Once powered on, use the cables to connect the Musibaby to a compatible Bluetooth device (smartphone, tablet, laptop, etc. ). When you can see the Musibaby in the list of available Bluetooth devices, select it to complete the connection.
You can then use the provided music or audio files on your Bluetooth device to play through the Musibaby. Furthermore, the Musibaby comes with free companion app allowing you to control the volume, power, and equalizer settings.
The app can be easily downloaded from the Apple App Store or the Google Play Store. Once successfully installed, use the app to adjust the settings to best suit your needs. Enjoy!.