In order to reconnect your Blink Sync module, you’ll need to first locate the Blink Sync module and unplug it from the power source. Once it is unplugged, you’ll need to locate and press the reset button.
You’ll know the reset process has been successful when the LED on the Blink Sync module turns solid red.
Once the reset process is complete, you can plug the Blink Sync module back into an outlet and then wait for the LED to turn yellow. At that point, take the USB cable that is included with the Blink camera and plug one end into your computer or laptop and then the other end into the Blink Sync module.
You’ll know the connection is successful when the LED turns solid green.
Once the connection is successful, you can use the Blink app to control and manage the configuration settings. After you have opened the Blink app, select the ‘add a new Blink Sync Module’ option. Follow the onscreen prompts to finish connecting your Blink Sync module.
It is important to follow these steps carefully to ensure your Blink Sync module is properly connected. If you have any trouble while attempting to reconnect your Blink Sync module, reach out to Blink support for assistance.
How long does Blink sync module take to connect?
The time it takes for the Blink sync module to connect depends on the Blink system you are connecting to and the network conditions, which can vary for each user. Generally, the sync module will connect to the Blink system within 15-30 seconds, however some users have reported that it can take longer.
Connecting the Blink system via USB cable can speed up the setup process, but it is not recommended to use USB cable in a location with poor or no Wi-Fi coverage such as outside of the home or using a mobile device.
Additionally, if there are any wireless devices nearby that are using the same frequency as your Blink sync module, this can also affect the connection time. To ensure the quickest possible connection time, make sure you choose a location that is within range of your Wi-Fi network, and that you are using the latest version of the Blink app.
Where is the reset button on the SYNC module for Blink?
The reset button on the Blink SYNC module is located on the bottom of the module. It is a small recessed button located next to the pairing hole. To perform a reset, press and hold the reset button for approximately 4-5 seconds, until the LED on the module illuminates with a solid white light.
This indicates the reset is complete.
Why is my sync module not working?
There could be a variety of reasons why your sync module is not working. First, start by checking to make sure your device is connected securely to the module and that the connection is undamaged. If both are in working order, then you may want to check to make sure the module has the latest firmware updated and that it is properly configured.
Additionally, if you are using multiple devices with the sync module, make sure they are all compatible with each other and that they’re properly connected. Finally, check your computer’s settings to make sure the module is being recognized and that the right permissions are set.
If all these steps don’t solve the issue, then you may need to contact your sync module’s manufacturer or the device’s manufacturer for further instructions on how to troubleshoot the issue.
Why wont my Blink module connect to Wi-Fi?
There could be various reasons why your Blink Module is not connecting to Wi-Fi. First and foremost, make sure you have the correct Wi-Fi password and the module is in range of your Wi-Fi network. If you are still having trouble, it could be caused by one of the following:
1. Wi-Fi interference – It is possible that other wireless networks or devices could be interfering with the connection, so make sure you are not trying to connect too far away from your router or in an area with a lot of competing networks.
2. Incorrect Configuration – Make sure the settings in the Blink Module are correct. If the SSID, password, or any other setting is wrong, the module will not be able to connect.
3. Firmware Issues – Older firmware versions may cause connection issues. Make sure your Blink Module is running the latest firmware version.
4. Hardware Issues – If none of the above options have solved your problem, there may be a hardware issue with the Blink Module itself. Try resetting the module and attempting to connect again. If that doesn’t work, you may need to contact customer service.
Why is my blink camera not updating?
If your Blink camera is not updating, there could be a few different potential causes. First, check to make sure the device is connected to your internet network, as this is necessary for any updates to take place.
If it is connected, try restarting the device or your router to reset any connection issues. You can also try reinstalling the Blink app and signing in again, as this can sometimes help. Finally, check to make sure that your device is capable of connecting to the latest version of the Blink app.
If the device’s hardware can support the latest updates, you should be able to install those updates on your device. If none of these troubleshooting steps work, contact Blink support and they can assist you in resolving the issue.
What happens if I delete my Blink Sync module?
If you delete your Blink Sync Module, you will no longer be able to use any of the features associated with it, including basic functionality such as linking your Blink Cameras together. You will no longer be able to access the Blink app, control your Blink Cameras remotely, and you will no longer be able to have access to any of the advanced features that the Sync Module provides such as motion detection, two-way audio, and Live View.
Additionally, your Blink Cameras may not function correctly as some settings will revert to the default settings. You may need to reset each camera or reinstall the Blink app in order to get them working again if they don’t reconnect automatically.
Therefore, it is highly recommended that you think twice and consult with your Blink customer service team before deleting your Blink Sync Module.
What is the difference between Blink Sync Module 1 and 2?
The Blink Sync Module 1 and 2 are both sync modules designed to work with Blink wireless home security systems. While they both function the same way, there are a few key differences between them.
The first difference is in the size and shape of each module. The Sync Module 1 is smaller with a circular design, while the Sync Module 2 is larger and more oblong in shape.
The next difference can be found in the wireless protocols each module uses. The Sync Module 1 only supports the 2.4 GHz wireless frequency, while the Sync Module 2 supports both 2.4 GHz and 5.0 GHz frequencies.
This means that the Sync Module 2 is better able to connect to long-distance devices, providing more robust wireless coverage.
The final difference between the two sync modules is in the number of devices they can support. The Sync Module 1 can support up to 10 Blink devices, while the Sync Module 2 supports up to 20. This allows for larger and more comprehensive home security systems with the Sync Module 2.
In short, the main differences between the Blink Sync Module 1 and 2 are their size and shape, the wireless protocols they support, and the number of Blink devices they can support.
Why is the blue light blinking on my Blink module?
The blue light blinking on your Blink module indicates that the module is in pairing mode, meaning that it is ready to be synchronized with another device. This is a necessary step for setting up the Blink module and getting it connected to your home’s Wi-Fi network.
If you have already paired the module with another device, then the blinking blue light could be an indication that the module has temporarily lost connection with the paired device and is trying to re-establish that connection.
If the blinking blue light persists, it could be a signal that the Blink module is having difficulty connecting to your Wi-Fi network. In that case, you may need to reset the module and try setting it up again.
What does blinking green light mean on Blink Sync module?
A blinking green light on your Blink Sync Module typically indicates that the module is in setup mode and awaiting connection to your home network. The light will continue blinking until the module has connected successfully and indicated that the connection is complete by emitting a solid green light.
If the green light continues to blink for an extended period of time and does not solidify to indicate that the connection has been made, it typically means there is an issue connecting the module to the home network.
Issues such as incorrect/unrecognized Wi-Fi passwords, incorrect router settings, or unstable Wi-Fi connection can cause connection failure and result in a blinking green light that won’t solidify. If you continue to encounter issues with the addressable connection, try unplugging the module and plugging it back in after a few minutes and attempting the connection again.
If the issue persists, you may need to contact your Internet service provider to ensure that your router settings and Wi-Fi connection are sufficient and stable.
Where is the reset button on Blink outdoor camera?
The reset button on a Blink Outdoor camera is located on the back of the camera. It looks like a small hole and you can use a paperclip to press and hold the button for at least 15 seconds to reset the camera.
Blink Outdoor cameras are designed to be waterproof and outdoor-friendly, so it’s important to make sure your camera is securely mounted before resetting. To do this, press and hold down the reset button for 15 seconds until you hear a double beep and the LED light flashes twice.
How do I reset my blink camera to factory settings?
Resetting your Blink camera to factory settings is a good way to make sure your camera is functioning properly. It can also help if you have recently noticed any unusual behavior from your camera, such as trouble connecting to the network or distorted video.
To reset your camera to factory settings, follow these instructions:
1. Locate the Setup button which is on the side of the Blink camera.
2. While pressing and holding the Setup button, remove the batteries from the camera.
3. Wait for 20 seconds before reinserting the batteries into the camera.
4. Release the Setup button after the batteries have been reinserted.
5. Your camera should now be reset to factory settings.
If you are having problems resetting your camera to factory settings, you may need to contact Blink’s customer service department for help.
Why does my Blink system keep going offline?
There are a few possible reasons why your Blink system may be intermittently going offline.
First, ensure that your Blink Sync Module is connected to a stable power source and a secure WiFi connection. If your Sync Module is located in an area with poor or weak WiFi signal, consider putting the module in a different spot to see if that helps.
You can also check the lights on the Sync Module to make sure that it’s connected to power and a strong WiFi signal.
Second, you may need to reset your Sync Module. To do this, unplug the Sync Module from power, wait 10 seconds and plug it back in.
Third, you may need to update your Blink app. Depending on your device, you can upgrade the app in the App Store or Google Play Store. Make sure that you are using the latest version the Blink app to ensure optimal performance.
Finally, you may need to reboot your router. To do this, unplug your router from power, wait 10 seconds and plug it back into power. You can also try disabling and re-enabled your router’s firewall or MAC address filtering feature.
If you continue to experience intermittent offline issues after trying the steps above, please contact Blink support for further assistance.
Why has Blink stopped working?
It is possible that Blink has stopped working due to a number of potential factors. One possibility is that the Blink servers are down due to technical issues. If this is the case, it is best to refer to the Blink website for updates on any maintenance or outages.
Additionally, Blink may have stopped working due to incorrect settings on either the Blink app or on the Blink Camera itself. To fix this, it is necessary to check the settings and ensure that everything is set correctly.
It is also possible that your device is not compatible with Blink. To check for this, make sure that the device meets the system requirements for the Blink app and that the device is up to date. It is also possible that your account may have been disabled due to inactivity, attempted fraudulent activity, or if your financial institution is having trouble processing payments.
If this is the case, it is best to contact Blink support directly.
Will I be able to see my local storage clips in the Blink app?
Yes, you will be able to see and access your local storage clips in the Blink App. The app provides an easy to use interface for viewing, editing, and deleting your saved clips. The Blink app also allows you to view and play back motion clips, keep your systems up-to-date, and receive real-time notifications and alerts.
You can also manage your Blink Solo and Blink XT devices, including Lifecycle Battery status, and Activity Zones. With the Blink app, you have the convenience and control of your Blink products at your fingertips.