In order to reconnect your Wyze Base Station, you need to follow a few simple steps.
1. Make sure the Base Station is powered on, with the Ethernet cable running to your router and the power adapter plugged in.
2. Open the Wyze app and navigate to the settings page.
3. Tap on “Devices” and select “Wyze Base Station”.
4. Tap on the “Base Station” tab and select “Reconnect”.
5. Wait for the app to recognize the Base Station, this will happen quickly.
6. Enter the 6 digit code displayed on your Base Station into the Wyze app.
7. You are now reconnected to your Base Station.
Following these steps should help you reconnect to your Wyze Base Station. If you continue to experience problems, please contact Wyze support for further assistance.
Why is my Wyze base offline?
If your Wyze base is offline, there are a few possible causes. The first is that the router or base station may be in an area with weak WiFi coverage. Make sure your router is placed in an area that can cover your Wyze base station if possible.
Additionally, make sure your router is operating properly by rebooting it if necessary.
Another potential cause could be interference from other devices or networks. If your Wyze base station is too close to other electronic devices, such as microwaves, it could interfere with the signal and cause the base station to become offline.
Additionally, there could be interference from other WiFi networks in the vicinity, which can cause your base station to become unreliable.
Other potential problems that could be causing your Wyze base to disconnect include issues with the firmware and hardware of the base station. Try updating the firmware of the device to see if that resolves the issue.
You should also check the connections to make sure all cables are properly connected.
Lastly, if none of the above solutions work, it may be necessary to reset your Wyze base station. This can help reset any corrupt settings, allowing you to start from a clean slate. Make sure to back up any important data before resetting your base station, as all data will be erased in the process.
Why is my Wyze Base Station not connecting to WiFi?
If your Wyze Base Station is not connecting to WiFi, the issue may be with the router or the Base Station itself. First, try moving the Base Station a few feet away from any other objects that may be interfering with the signal, such as microwaves or TVs.
Then, make sure your router is compatible with the Base Station by checking its specifications and settings.
If you find that your Base Station is still not connecting to WiFi, you should try resetting it. To do this, press and hold the reset button until the BaseStation’s light stops flashing before releasing the button.
After this, it should re-connect to its previously saved WiFi network.
If you don’t know its previous network, you can easily set this up by downloading the Wyze app and following its setup process. Be sure to follow all the steps carefully to avoid any connection issues.
If none of this works, you may need to contact Wyze customer service to troubleshoot the issue.
What is the sync button on the Wyze Base Station for?
The sync button on the Wyze Base Station is used to synchronize the Wyze Base Station with Wyze sensors or devices. By pressing the sync button, a signal is transmitted from the Base Station to the sensors or devices, which helps make sure that the sensors or devices are connected to the Base Station.
This is especially helpful when you are trying to add new devices or when you experience interference with existing sensors or devices. Additionally, it is recommended to press the sync button when you are troubleshooting your Wyze devices or if you experience disconnections or lag.
Does Wyze Base Station have a battery?
No, Wyze Base Station does not have a battery. Although the station is powered through an included AC adapter, there is no internal battery. This means users must have a reliable, continuous power source to keep the station up and running.
Additionally, all Wyze devices that connect to the station will cease to operate if the power is interrupted. For this reason, it is important to establish a secure power source for the station in a reliable location within your home.
How do I change my WIFI to Wyze base?
To change your WIFI to a Wyze Base, you will need to connect your Wyze Base to your router as a mesh node. You may need an additional mesh router to do this, depending on the type of router you currently have.
First, you will need to make sure your router is connected to the Internet, and is broadcasting a 2.4Ghz or 5Ghz WiFi signal. You can check your router’s settings to verify this.
Next, you will need to install the Wyze app on your mobile device. Once installed, you will be prompted to connect your Wyze Base to the same WiFi network that your router is connected to. Follow the on-screen instructions to do this.
After the Wyze Base is connected, you will be prompted to set up your desired settings. This is where you can select the type of WiFi network you want your base to broadcast, either 2.4Ghz or 5Ghz. Additionally, you can select the name (SSID) and password for your new WiFi network.
Make sure to make a note of this information, as you will need it for any other devices you want to connect to it.
Finally, you will need to save your settings. To do this, simply click the “Save” button. Once your settings have been saved, you can now disconnect your mobile device from the router’s WiFi network and connect it to your new Wyze Base instead.
Congratulations, you’ve now successfully changed your WIFI to a Wyze Base!
Can WYZE outdoor base connect to WIFI?
Yes, the WYZE Outdoor Base can connect to WIFI. The base is compatible with the 2.4 GHz b/g/n WIFI networks and it includes a weatherproof USB modem that has an RS485 port enabled. The base is also capable of connecting to local WIFI networks, making it easy to control your home’s outdoor lighting and other electronic devices from anywhere.
Additionally, the base provides an always-on LTE connection so that you can always stay connected and ensures a constant flow of data to the Wyze app.
How do I factory reset my WYZE hub?
To factory reset your WYZE hub, the first step is to disconnect the power from the hub itself. Once the power is removed, use a paperclip or similar tool to press and hold the reset button for 10 seconds.
Once the 10 seconds have elapsed, continue to hold the reset button for a few seconds more until the LED status light starts blinking amber.
Finally, reconnect the power to the hub. The LED will blink amber for up to 90 seconds as the hub is resetting itself. Once the amber light is steady and constant, the factory reset is complete. It is recommended to do a factory reset if you experience any issues with the hub, or if you are selling the device.
It is important to note that doing a factory reset will erase all settings and configurations and will require you to set up the WYZE hub once again.
How do I reset my WYZE home monitoring system?
To reset your WYZE home monitoring system, there are a few steps you need to take:
1. Disconnect the WYZE camera from all power sources;
2. Wait for 10 seconds and then reconnect the WYZE camera to its power source;
3. Remove the WYZE camera from the WYZE app;
4. Reinstall the WYZE app and log back in using your account;
5. Follow the instructions on the app to reconnect the WYZE camera;
6. After the camera is successfully reconnected, follow the instructions to set up your WYZE home monitoring system. You can configure motion detection, audio recognition, and other settings as desired.
This should reset your WYZE home monitoring system. If you have any questions or problems with the reset process, please reach out to Wyze Support for further assistance.
Why is Wyze not working?
There could be several reasons why Wyze may not be working, including an issue with the Wyze app, a problem with your Internet connection, or a problem with the Wyze device itself.
First, you should check that you have the latest version of the Wyze app. If you’re using an Android device, you can do this by going to the Google Play Store and selecting ‘My Apps & Games’. If you’re using an iOS device, go to the App Store and search for ‘Wyze’.
If there is an update available, make sure to install it.
Second, check the Internet connection. Make sure all necessary connections and settings are in place and that your Wi-Fi network is working properly. If it isn’t, try restarting your router. It’s also possible that your router is running in an outdated mode, so try switching it to a faster mode, like 802.11ac.
Finally, verify that the Wyze device is powered on, connected to Wi-Fi, and working properly. If the device cannot connect to Wi-Fi, reset the device by pressing and holding the Reset button for 5–7 seconds.
If the LED light starts blinking green, it’s resetting. Once it stops blinking, it should re-connect to your network.
If none of these steps help fix the issue, contact Wyze support for further assistance.
What is going on with Wyze camera?
Wyze cameras have been gaining in popularity both due to their affordability and their features. The Wyze Cam V2 and Wyze Cam Pan offer 1080p HD streaming, infrared night vision, motion detection, two-way audio, pan/tilt/zoom, smart home integration, on-demand recording, and more for a fraction of the cost of competing products.
Despite the low price, Wyze products are known for their quality, reliability, and customer satisfaction. Recently, Wyze has started to release new products and updates, including the new Wyze Outdoor Cam, the Wyze Sense Starter Kit, and an update to their iOS and Android apps.
With all of these new offerings, Wyze cameras are sure to remain a popular choice among budget-conscious consumers who are looking for quality security solutions.
Is Wyze no longer free?
No, Wyze is no longer free. The company initially offered their services for free in the early days but eventually decided to start charging a fee in order to cover costs associated with their operations.
Currently, their pricing model offers three plans: Wyze Cam, Wyze Cam Plus, and Wyze Sense. Wyze Cam is the most basic plan, which costs $19.99 per camera per year, and offers up to 1080p HD video, two-way audio, customizable motion detection, and night vision.
Wyze Cam Plus ups the ante with additional features, such as 14-day free video storage in the cloud, person detection, and packages starting at $37.99 per year. Wyze Sense is Wyze’s home security bundle, which includes two contact sensors, one motion sensor, a bridge, and costs $19.
99 per year.
How do I get Wyze back online?
To get your Wyze device back online, you will need to make sure your router is connected to the internet and that it’s broadcasting a 2.4 GHz Wi-Fi connection. Once your router is connected properly, follow these steps to get your Wyze device back online:
1. Open the Wyze app and select the device you want to connect.
2. Select Connect Now and make sure the Wi-Fi network you want to connect to is selected.
3. Enter the Wi-Fi password and select Next to connect your device.
4. Depending on the device you’re connecting, you may have to select additional settings such as a network name and security settings.
5. Once your device is configured, make sure that the Status shows Connected and then use the Wyze app to configure the settings and begin using the device.
If you’re still having issues getting your Wyze device back online, try resetting your router. This can be done by unplugging the power cable from your router and counting to 10 before plugging it back in.
Once your router is back on, follow the steps outlined above to reconnect your Wyze device.
How do you refresh the Wyze app?
To refresh the Wyze app, you will need to force close the app and then reopen it. To do this on an Android device, go to the Settings app, select Apps & notifications, select the Wyze App, select Force stop, and then reopen the Wyze app.
On an iOS device, double click the home button and then swipe up on the Wyze app to force close it. After this, open the Wyze app again and it should be refreshed and up to date.
What is error code 90 on Wyze?
Error code 90 on Wyze is an error related to the device’s connection to the Wyze mobile app. This particular error can be caused by a few different things:
1. Network issues: The device may have temporarily lost its connection to the local Wi-Fi network, which can cause this error. Make sure that your device is still connected to Wi-Fi and that the signal strength is strong.
Additionally, ensure that the Wyze app is up-to-date and that you are on the most current version.
2. Device malfunction: The device may be having a problem that’s preventing it from connecting to the app. Try resetting the device by holding down the power button for 10 seconds to see if it helps, but if the error persists then you’ll likely need to reset the device from the Wyze app.
3. System compatibility: If you’re running an older version of iOS or Android, then the Wyze app may not work properly or at all. Make sure you’re running the most current version of the software available for your device.
If you’re still encountering the error code 90 on Wyze, then contact Wyze support for assistance.
What causes Wyze Cam to go offline?
The main cause can be a bad internet connection or a connection issue. The WiFi signal strength may be too weak or the connection may be interrupted due to distance, obstacles, or other sources of interference.
The camera may also be disconnected from the WiFi network, or there may be an issue with the WiFi router or modem. Other potential causes include a power outage, a problem with the camera itself, an IP address conflict, or a security configuration issue.
It is also recommended to check the firmware version regularly to ensure that it is up to date.
How do I fix WYZE camera WIFI?
Depending on the severity of the issue and the source of the problem.
First, you should try power cycling the router and WYZE camera. To do this, turn off the power to the router and unplug the power adapter from the camera. Wait a few seconds, then plug the power Adapter back into the camera and turn on the power to the router.
This can help to reset the connection and sometimes resolves the issue.
If the power cycling does not resolve the issue, then you should check the WIFI settings on the camera. To do this, open the WYZE app on the device. In the home tab you should see the device listed. Select it and check that the correct WIFI network is selected and the password is correct.
If the WIFI settings are correct, then you should check the WIFI router. If the router is secured with a MAC address filter or you recently changed the configuration, make sure that the Mac address of the WYZE camera is included in the list of allowed MAC addresses.
Finally, if you’ve tried all the above steps and still cannot get the WYZE camera WIFI connection to work, then you can try temporarily disabling the firewall or changing the router’s security settings to see if this helps to establish a WIFI connection.
If you do this, be sure to revert the settings back to normal after you’ve determined the connection has been established.
Overall, troubleshooting WYZE camera WIFI issues can often be resolved by restarting the router, checking the WIFI settings in the WYZE app, making sure the MAC address is whitelisted if the router is using a MAC filter, or temporarily disabling the firewall or changing the security settings on the router.