Removing your case mate phone case can be done in a few simple steps.
First, start by squeezing the sides of the case together. This should create an opening between the case and your phone. Once you have this space, you can start slipping a thumb or finger into the gap between the case and the phone.
Gently pull the case away from the phone, continuing to work your way around the device until the entire case has been removed.
You may find that the case doesn’t want to easily come off. If this is the case, use some more force to pull it off but be careful not to damage your phone in the process. If it still won’t come off, you can always use a small tool like a spudger or dental pick to help pry it open around the edges and you should be able to easily remove it from there.
It’s always handy to keep a few of these in your toolkit, especially if you use a lot of cases so that you can easily remove them without damaging your phone. Once you have removed your case mate phone case, you can easily replace it with another case of your choice and enjoy your new look.
What do you do if you can’t get your phone case off?
If you can’t get your phone case off, the first thing to do is double-check that all latches, buttons, and other mechanisms used to secure the case to the phone have been properly disengaged. If there are any snags or catches that haven’t been undone, the case won’t be able to be removed.
If all the latches are undone and the case still won’t come off, the next step is to make sure there isn’t any debris or dirt lodged into the grooves of the case that is preventing it from unhooking.
If debris is found, use a small tool like a toothpick or a pen-end to carefully scrape it out.
If all of these steps fail, then you can try prying the case off. Place the phone face down on a solid surface and be sure not to damage any of the components on the case. Then, by using a flat object like a card, gently but firmly pry the edges of the case off.
If the case still won’t budge, use caution and secure each corner of the case before you try to pull it off.
How do you get a hard plastic phone case off?
Getting a hard plastic phone case off can be difficult, especially if it’s been firmly attached for a long time. It’s important to be careful when removing the case, so you don’t accidentally damage the phone itself.
Here are some steps you can follow:
1. Before you do anything, turn off your phone and remove the battery, SIM card, and any other removable components.
2. Take a flat instrument such as a credit card or plastic pry tool, and begin to gently wedge it between the case and phone. Starting with the sides/corners, use the tool to slowly work around the edges until the case begins to separate slightly.
3. Once the edges have been loosened, you can use your fingers to grip the phone case and pull it off completely. If necessary, use the pry tool to help loosen the case further.
4. Use a soft cloth to clean any residual adhesive left behind in the edges.
5. Replace your phone’s battery, SIM card, and other removable components.
By following these steps, you should be able to safely and successfully remove a hard plastic phone case and take your phone out of its protective shell.
Are Case Mate waterfall cases safe?
Yes, Case Mate waterfall cases are generally safe for your device. The cases are made from durable materials, such as rigid polycarbonate and impact-resistant TPU, that protect the device from minor scratches and drops.
The cases also have raised bezels to help protect the camera, ports, and buttons from dust and dirt. Additionally, the cases have a built-in anti-scratch coating to help provide added protection. Overall, Case Mate waterfall cases provide reliable protection against everyday wear and tear.
How do I get the back off my iPhone 7?
To get the back off your iPhone 7, you need a special tool called a “pentalobe screwdriver. ” This screwdriver is designed to fit the five-pointed star screws that secure the back of the iPhone 7. To begin the process, turn the phone off, lay it face down on a soft towel and use a plastic opening tool to pry off the two strips of plastic that fasten the two halves of the case together.
Then, using the pentalobe screwdriver, remove the two screws on the bottom of the phone that are closest to the Lightning connector. Now you should be able to remove the back cover of your iPhone 7. If you have difficulty removing the case, an authorized Apple repair shop should be able to help.
Can Liquid phone cases burn you?
No, liquid phone cases typically cannot burn you. Liquid phone cases are often made of silicone or special liquids that are designed to be safe and not create any burning sensation. Additionally, most liquid phone cases typically have raised edges that provide a barrier and keep the liquid away from your skin.
If the liquid is left in direct contact with the skin, you may experience a slight coolness or a slimy feeling, but not a burning sensation.
Do Case-Mate cases turn yellow?
No, Case-Mate cases typically do not turn yellow over time. In general, Case-Mate cases are designed to remain intact and maintain their original color. The cases are made of highly-durable materials that are designed to withstand daily use and resist fading, yellowing, and cracking over time.
Moreover, each Case-Mate case is subjected to rigorous quality control standards and tests in order to ensure that the final product meets the company’s high standards of quality and durability. Therefore, if you are looking for a case that is likely to not to turn yellow and provide long-lasting protection for your phone, Case-Mate can be a great choice.
Is Case Mate a protective case?
Yes, Case Mate is a protective case that provides ample protection for your cell phone. Their cases are designed with a dual-layer protection system that features an impact-resistant hard shell and a shock-absorbent interior to keep your device safe from drops and wear and tear.
They also have raised bezel and a raised lip that prevents your screen from scratching or touching the surface below it. These cases are slim and lightweight, so you never have to worry about them being too bulky or heavy.
Additionally, the cases come in a variety of stylish designs and colors, so you can add a bit of your own personal style to your device.
How do you get air bubbles out of your phone case?
In order to get air bubbles out of your phone case, there are a few steps you can take. First, thoroughly clean the case with a microfiber cloth to remove any dust and debris. Then, inspect the case for any edges that may not be fully sealed.
If any edges are found, use a thin craft knife to seal them.
Next, use a lint-free cloth to apply a thin layer of rubbing alcohol, such as isopropyl alcohol, to the case. Rub the case gently to help spread the rubbing alcohol evenly around the case. This should help remove air bubbles by loosening the glue.
Finally, use a thin object like a pin or a needle to gently press the air bubbles outward. This should help them pop and release from the case. Make sure to use a gentle pressure as you don’t want to puncture the case.
Once the bubbles have been removed, allow the rubbing alcohol to dry completely before placing your phone in the case.