Replacing an old medicine cabinet can be a relatively easy procedure that can have a big impact on the overall décor of your bathroom. There are a few steps involved in replacing an old medicine cabinet with a new one.
First, gather the necessary tools and supplies. You will need a level, a Phillips screwdriver, a flathead screwdriver, and a stud finder. You will also need to purchase the appropriate screws and anchors for your new medicine cabinet.
Second, turn off the power. Make sure the wall switch for the bathroom is off before removing the cabinet.
Third, remove the old medicine cabinet. Start by unscrewing the mounting screws from the wall studs. Carefully lift the cabinet off the wall and gently set it aside. Remove any leftover screws or bits of mortar from the wall with a putty knife.
Fourth, install the new cabinet. Place the cabinet in the desired spot and use your level to ensure it is plumb. To do this, place the top edge of the level against the cabinet and adjust the cabinet until the bubble is in the center.
After the cabinet is level, mark the mounting holes in the wall.
Fifth, use a stud finder to locate the wall studs then insert an anchor into each one. Secure the anchors with screws and then affix your medicine cabinet with the appropriate screws.
Finally, turn the power back on and test the new medicine cabinet. Adjust any screws if necessary, and your new medicine cabinet should be ready to go.
Is there a standard size for medicine cabinets?
No, there is no exact standard size for medicine cabinets. The size of a medicine cabinet can range from 12″ to 24″ wide and anywhere between 12″ and 72″ in height. Additionally, the inner compartments of medicine cabinets can have multiple adjustable shelves, so the storage capacity can be customized to meet the user’s needs and the available space in their bathroom.
To properly measure for a medicine cabinet, be sure to measure both the width and height of the intended space, as well as the width and height of the door and any other construction that may have been done around the vanity.
Are all medicine cabinets the same depth?
No, medicine cabinets are not all the same depth. The depth of a medicine cabinet can vary considerably depending on its intended use and the size of the room. Smaller medicine cabinets may be around four to six inches deep, while larger ones can be as much as a foot or more deep.
Some medicine cabinets are even adjustable and can be customized to fit into a specific area. Many of the larger medicine cabinets will also include extra shelves to provide more storage space.
What is the depth of a recessed medicine cabinet?
The depth of a recessed medicine cabinet will vary depending on the manufacturer and type of cabinet. Some can be very shallow in depth, with a range of 3 to 4 inches, while others may range from 6 to 12 inches deep.
When measuring for a new recessed medicine cabinet, it’s important to measure the dimensions of the wall cavity you will be installing it into in order to ensure you purchase a cabinet that fits snugly and securely into the area.
Many manufacturers will also provide detailed measurements of their products so that you can double check that the cabinet you choose will fit the area you are installing it into.
What size mirror do you need for a 60 inch vanity?
When it comes to determining the size of the mirror needed for a 60 inch vanity, the general rule of thumb is that the size of the mirror should be approximately two-thirds the length of the vanity. Therefore, for a 60 inch vanity, you would need a 40 inch mirror.
However, it is important to consider the size of the wall and bathroom as a whole when making this decision. If the bathroom has limited space or is quite small, then a smaller mirror may be needed. On the other hand, if the wall has more space and the bathroom is larger, a larger mirror may be a better option.
The trim of the vanity should also be taken into account to make sure the mirror size matches the vanity’s overall appeal.
How big should a mirror be over a 48 inch vanity?
The size of a mirror over a 48 inch vanity should depend on the size and shape of the vanity itself. Generally, an oval or rectangular mirror should be between 25 and 40 inches wide, while a round mirror should be between 24 and 44 inches in diameter.
If you are looking to get the most benefit out of the mirror, you could opt for a mirror that is slightly larger than the vanity. For example, if the vanity is 48 inches wide, it is recommended to consider a mirror that is between 52 and 56 inches wide.
It’s also important to consider the shape of the mirror based on the design of the vanity, as well as the size of the room, making sure to leave enough space for circulation. Depending on the overall design and layout, the mirror may need to be larger to complete the look.
How do you choose the right size mirror for a vanity?
When choosing the right size mirror for a vanity, several factors should be taken into consideration. To start, you’ll need to measure the vanity to determine the available space for the mirror. Make sure you factor in any existing shelving or hardware that will be in the way.
Furthermore, be sure to measure the height of the vanity and the distance of the faucet to ensure the mirror isn’t too low or too high when hung. Ideally, the mirror should measure at least 3-inches shorter than the vanity height while providing around 12-15 inches of space between the top of the vanity and the bottom of the mirror.
This will provide the right amount of space for those who need to primp and prep daily. Additionally, when picking out the size of the mirror, be sure to consider the overall size and shape of your vanity, as well as the wall space you have to work with.
A large, eye-catching frameless mirror can be hung over a double vanity, adding dimension to the room, while high-style framed mirrors come in a variety of sizes to provide additional interest and character to the room.
Ultimately, when picking out a vanity mirror, be sure to consider all of the above points and be sure to select the perfect size that fits the design and feel of your bathroom.
Should vanity lights hang over mirror?
In general, vanity lights should definitely hang over a mirror for the best result. By having light at the same level of your face when you look in the mirror, it creates an even and consistent light source, which is more ideal for makeup application and other grooming tasks.
Vanity lights also provide a more flattering complexion in the mirror, which is important for making sure that your groomed appearance looks its best. Additionally, hanging lights over the mirror is necessary if you don’t have natural light in the bathroom, as it will allow you to have enough light for the tasks you need to do.
Therefore, to get the best look and improve any grooming outfit, vanity lights should absolutely be hung over a mirror.
How do you remove a medicine cabinet from a bathroom wall?
Removing a medicine cabinet from a bathroom wall requires several steps. First, you will need to empty the cabinet of all its contents as well as any cleaning supplies that may be beneath it. Next, you will need to locate the screws that are holding the cabinet in place.
These are usually located inside the cabinet or at the back of the unit. You should then unscrew the screws or bolts and carefully take the medicine cabinet off the wall. Make sure that you wear safety goggles while doing this in case the screws contain any dirt or chemicals.
After the medicine cabinet is removed, you can use a putty knife to scrape away any remaining caulking or adhesive. Once all residue is removed, you can clean the wall with a mild detergent and water solution.
Finally, you can patch the wall with spackling compound and repaint as desired.
How are medicine cabinets attached?
Medicine cabinets are typically wall-mounted for convenience and accessibility. Generally, the little shelves are attached to the wall either directly or via some sort of recessed box. For direct attachment, you would need to find studs in the wall and use appropriate screws to ensure the cabinet is securely bolted.
If mounting into a recessed area, the cabinet can likely be attached with a few screws. If the walling material isn’t drywall, then other fastening methods may be more appropriate. In any case, it is important to ensure adequate support and safety when attaching a medicine cabinet.