Resetting your IntelliChlor chlorine generator is a simple process. All you need to do is turn the unit off and unplug it from the power source. Wait five minutes before plugging the unit back in, then turn it back on with the power switch.
The IntelliChlor chlorine generator may require additional steps to reset depending on the make and model. Refer to the product manual for specific instructions.
For saltwater chlorinators, you may also need to reset the salt level if you have recently added salt to the pool. To do this, consult your product manual for the appropriate settings for the desired salt level.
Make sure you allow the salt to completely dissolve in the pool water before making any changes.
Finally, it’s important to perform regular system maintenance such as keeping the cells and surfaces free of debris, and replacing old cartridges or cells. If you have difficulty resetting the IntelliChlor generator, or you experience any other technical difficulty, contact your local dealer or technician for assistance.
Why is my salt water chlorinator not working?
There could be a few different reasons why your salt water chlorinator is not working. The most common issue is that there aren’t enough salt crystals for the cell to effectively and efficiently convert.
This is usually due to inadequate cleaning of the cell and/or calcium deposits clogging the plates. If the salt levels are adequate, then the issue could be a malfunctioning cell, a weak pump, or a problem with the chlorine generator’s power supply, wiring or control panel.
It is also possible that there is an issues with the pH or temperature readings. To adequately diagnose and repair the issue, it is best to have a professional examine the chlorinator who can then determine the precise cause and fix the problem.
How long does a Pentair Intellichlor last?
The Pentair Intellichlor is designed to provide a long-lasting and reliable chlorine generator for your pool. Its average lifespan is 8-10 years, however some users may experience longer life with proper maintenance and care.
The key is to keep the cell and its components clean, replace the salt cell when needed, and to have the system services regularly. You also need to adjust the conditions regularly, including chlorine output, pH, and total alkalinity of your pool water.
All of these steps will help extend the life of your Pentair Intellichlor and keep your pool water clean and safe for a long time.
What temp does intellichlor stop working?
Intellichlor will stop working when the temperature of the water surrounding the cell drops below 42°F. The solution is to add a freeze protection valve either on the intake or discharge side of the machine, which will keep the water running through the cell at a temperature where it can still operate.
Additionally, if you are using a Intellichlor in an outdoor setting where freezing conditions are likely, adding an insulated box around it will help keep the contents of the machine above the 42°F threshold.
It’s important to note that you should never operate a Intellichlor in water that is above 104°F. Doing so can cause permanent damage to the cells and internal components.
How do I know if my Pentair salt cell is bad?
The most common sign that your Pentair salt cell has gone bad is that your pool is not producing chlorine. If the pool continues to show a lack of chlorine production, it could be a sign that your salt cell has ceased to function properly.
Other indicators may include: a higher than usual salt reading; a decrease in salt cell voltage; debris blocking the salt cell plates; or an unexpected rise in backpressure on the filter. Additionally, if you notice that chlorine is being produced, but it seems lower than normal, it could be an indication that your salt cell is encountering some issues.
If you have noticed any of the above signs, it is best to contact a professional to come and inspect the salt cell. In some cases, it may just be needing to be insulated or cleaned. If the problem is more serious, you may need to consider replacing the cell entirely.
If a replacement is necessary, it is important to make sure that you get a genuine Pentair salt cell, as they are specifically designed to work with Pentair’s chlorinators.
What should IntelliChlor be set at?
The setting for the IntelliChlor varies based on several factors, including the size of your pool, the environmental conditions, and the chemistry of your pool water. Generally, it is recommended to set the IntelliChlor to 0.
5ppm for most pools. However, if you have a large body of water or a pool heavily exposed to the sun, you may need to increase the setting to 1ppm. If you have a heavily chlorinated pool with a constant high chlorine level, you may need to reduce the setting slightly.
To ensure accurate IntelliChlor settings, it is always best to have a professional pool technician conduct regular tests and calibrations to ensure balanced chlorine levels.
How much salt should I add to my pool?
The amount of salt you need to add to your pool depends on the size of the pool and the type of salt you are using. Generally speaking, you should start by adding 1 pound of salt per 100 gallons of pool water.
If you are using a different type of salt, consult the product instructions for the proper amount to add.
It is also important to monitor your salt levels regularly and add more salt, if needed. For example, if you are using a chlorine generator, you should regularly test the salt levels and adjust the salt concentration.
A salt level that is too low has to be rebalanced with more salt, whereas a salt level that is too high needs to be diluted with more water. Additionally, keeping the salt levels in your pool within the suggested range will ensure optimal performance and cleaning capabilities of your pool equipment.
What percentage should my salt chlorinator be set at?
The ideal setting for your salt chlorinator is dependent on many factors, such as the size of your pool, the activity level within the pool, the average temperature and more. Generally, a range between 2.0 and 4.
0 ppm is recommended in most cases. It’s best to find a setting that meets the needs of your pool and adjust it as necessary. It’s also important to remember to check the levels regularly and adjust as needed to maintain a healthy and clean pool environment.
What should salt cell read?
The ideal salt cell reading for a pool should be between 2750 – 3500 parts per million (PPM). Salt cells function by converting the salt in the swimming pool water into chlorine. Depending on the chlorine demand of the pool, the cell will produce more or less chlorine, and thus the reading will vary.
When the cell’s PPM rises above the range indicated, it is an indication that the cell needs to be cleaned, which can be done using acid, a specialized cell-cleaning solution, or a combination of the two.
It is important to ensure the salt cell remains within the acceptable range in order to maintain proper sanitization levels and to reduce the risk of skin and eye irritation.
How do I know if my salt chlorinator is working?
To check if your salt chlorinator is working properly, first ensure that it is correctly installed and that all relevant settings are correctly adjusted. If everything is correctly set up, then the chlorinator should automatically begin producing chlorine.
To check if it is producing chlorine, you can test the chlorine levels in your pool water with a pool test kit. If a reading of 1.0 – 3.0 ppm of Free Chlorine is present in the pool water, then your salt chlorinator is working correctly and producing chlorine as it should.
If no chlorine reading is present, or if the level is significantly lower than 1.0ppm then you should investigate further; it may be that the power to the chlorinator is out, the unit may need servicing, or the settings may need to be adjusted.
Why is my Pentair salt cell blinking red?
If your Pentair salt cell is flashing red, this usually indicates that the salt level in your pool is too low. In order for the cell to create chlorine, it needs a certain minimum level of salt in the water.
When the salt levels are low, the cell will stop producing chlorine and the red light will flash. To fix the problem, you will need to add more salt to your swimming pool. It’s best to use powdered or crystals to add the salt, as it mixes better with the pool water.
Make sure you use high-quality salt specifically labeled for swimming pool use, as other types of salt can damage your equipment. After adding the salt, make sure to check the salt levels with a salt testing kit to make sure the salt levels have reached the minimum recommended level for your Pentair cell.
How do I check the life of Pentair Intellichlor?
The life of Pentair Intellichlor can be checked in a few easy steps. First, you must check the display on the Intellichlor control center to make sure it is still showing the current reading. This should be indicating the amount of chlorine left in the cell.
If the display is blank or has an error message, this could indicate that the Intellichlor is no longer working.
Next, you should check the cell itself. Make sure the salt cell is clear of debris and the wires are connected tightly. If any of the wires appear to be loose or corroded, it is best to replace them.
If you can see dirt, sand, or scale building up on the cell, this could also be a sign that it needs to be replaced.
Finally, it is important to monitor the chlorine output of the Intellichlor. Use a chlorine test kit to measure the concentration of chlorine in the pool water. If the amount of chlorine is no longer within range, it is usually a sign that the cell is over-chlorinating or gradually wearing out.
If this is the case, then it is probably time to make sure the cell is replaced.
Can a chlorinator cell be repaired?
Yes, it is possible to repair a chlorinator cell. It is important to understand the type of cell you are using and its specific components before attempting to repair it. Depending on the age and condition of the cell, you may be able to purchase replacement components or have it professionally serviced.
Depending on the problem, a new cell can also be purchased for replacement of the existing one. Proper installation is important as is having an understanding of the components and wiring. If you are concerned that the cell may need to be replaced, it is best to consult a professional technician to assess the situation.
How often do you need to add salt to a pool?
The frequency at which you need to add salt to a pool depends on several factors, including the size of the pool, the type of filtration system, and the level of chlorination desired. Generally speaking, with a salt-chlorinated pool, it is recommended to add salt regularly, typically every two to six weeks.
However, before adding salt to your pool, it is important to check the salinity of your pool using a reliable testing kit. If the salinity is within the recommended range, then you may not need to add any additional salt.
It is also important to check your water balance prior to adding salt, as an imbalance can lead to staining and scaling on the pool walls. Additionally, your filter system should be inspected and cleaned periodically to help prevent salt build-up and other issues.