First, try resetting the device with a soft reset by removing the power source and tapping the reset button once. This should restore the device to its default settings and allow you to configure the device as desired.
If that fails, you can try separating the device from the power source, removing the power-source completely and then reconnecting it in order to do a hard reset.
You may also try using the Anker app that allows you to reset the device directly from your smartphone. The app will provide instructions for resetting the device, and will help you get back up and running quickly and easily.
Finally, in some cases of an Anker device failure, you may need to have the device professionally serviced. Check the product website for more information and for contact details for hardware support.
Why is my Soundcore speaker not connecting?
If your Soundcore speaker is not connecting, there are a few possible explanations.
The most common solution is to simply reset the speaker. To do this, remove the power cable from the speaker, press and hold the mute button for 10 seconds and then reconnect the power cable. If this does not solve the problem, try connecting the speaker to another device to determine if the issue is with the speaker or the device you’re trying to connect it to.
If your speaker still does not connect, the Bluetooth connection may be disabled or the speaker may need to be updated. To determine if the Bluetooth connection is disabled, open your device’s settings and proceed to Bluetooth settings.
If Bluetooth is enabled, double check that the speaker is not in pairing mode. To check if the speaker is in pairing mode, hold down the play button for 10 seconds.
If neither of these solutions solve the issue, it is possible that the speaker’s firmware needs updating. To do this, download the Soundcore app (or open it if it’s already installed) and follow the on-screen instructions to update your speaker’s firmware.
If you’ve tried all these solutions and your Soundcore speaker still will not connect, please reach out to Soundcore customer support for further assistance.
How do I factory reset my Soundcore select pro?
Here are the steps to factory reset your Soundcore Select Pro:
1. Press and hold both the Volume Down and Play/Pause buttons for about 10 seconds.
2. During this time your Soundcore Select Pro will power off and reset itself.
3. You can now release the buttons and your Soundcore Select Pro should be factory reset.
Note: When you reset your Soundcore Select Pro, you will lose all your settings, music, and connected devices. After completing the reset, you will need to configure all of your settings again and reconnect your devices.
How do you put Soundcore headphones in pairing mode?
To put your Soundcore headphones into pairing mode, the process will depend on your specific model. Generally, however, the steps involve pressing and holding down the power button for a few seconds until the light on the headset flashes, indicating that it is in pairing mode.
For some models, you may need to turn on the Bluetooth feature on your mobile device, and search for your headphones by name. Once your device has successfully located and identified your headphones, it should take just a few minutes to pair them.
It is also possible to pair Soundcore headphones from your device’s Bluetooth settings. There, you should be able to see a list of available devices and select your Soundcore headphones from the list.
Press the power button on your device to accept the pairing and it should be connected shortly afterwards.
Finally, Soundcore headphones also support the Near Field Communication (NFC) connection, allowing you to pair it by simply placing the NFC-enabled device against the left part of the headphone. This should take just seconds to complete the pairing process.
Why won’t my Soundcore earbuds connect together?
Your Soundcore earbuds may be unable to connect together for a variety of reasons. The first thing to check is to make sure the headphones are properly paired to each other and not already connected to another device or to each other.
You can do this by turning off any connected device and then pressing and holding the power button on both earbuds simultaneously until the light on one turns off and then again on the other. This will put the headphones into pairing mode and they should be able to connect to each other.
If this doesn’t work, make sure the headphones are running on the same version of firmware by checking the Soundcore app or your headphone’s manual.
If the headphones are running on the same firmware and you’re still having issues, then it could be a hardware issue such as damaged charging ports or an issue with the Bluetooth chip. If this is the case, contact customer service for help.
What are the buttons on Anker speaker?
Anker speakers come with a number of buttons to control the device. Depending on the make and model of Anker speaker, the buttons may vary. However, the most common features that the buttons will control include power, Bluetooth pairing, playback, and volume.
Power: The Power button turns the speaker on and off. Depending on the model, this button may also serve a secondary function, such as resetting the speaker back to its default settings.
Bluetooth Pairing: This button is used to connect the speaker to devices such as smartphones or tablets. When pressed, it will activate the speaker’s Bluetooth feature, allowing it to pair with other Bluetooth-enabled devices.
Playback: Depending on the model of Anker speaker, this button may be designated as “Play/Pause” or “Start/Stop”. This button is used to play or pause a track or activate the speaker’s Bluetooth feature.
Volume: When pressed, this button will increase or decrease the speaker’s volume accordingly. Depending on the model, this button may also have a function to mute the speaker.
What does the Soundcore button do?
The Soundcore button is a multi-functional control button located on many of Soundcore’s products. It can be used to play, pause and skip tracks or activate voice assistants like Siri, Google or Alexa.
It is also used to answer and end calls, adjust the volume, and activate ambient mode. Depending on the product, the Soundcore button may also allow users to quickly switch between input sources like Bluetooth and aux.
Additionally, some products feature a programmable function that can be customised to meet the user’s specific needs. With the Soundcore app, users can customise the button so it can be used to control other devices and applications.
What is the TWS button on Soundcore?
The TWS button on Soundcore is used to help you connect your Bluetooth headphones or speakers to another device. When you press the TWS button, the headphones or speakers enter pairing mode, allowing you to connect them to a device like your smartphone or laptop.
This can be useful when you want to share audio with a friend, allowing both of you to listen at the same time. Additionally, the TWS button allows you to link two Soundcore devices together, allowing you to create a powerful 2.
1 stereo soundstage. This can really enhance your audio listening experience when used with compatible audio devices.
Why is the blue light flashing on my Anker speaker?
The blue light flashing on your Anker speaker is an indicator that the speaker is in pairing mode. When the speaker is in pairing mode, it is actively searching for a compatible device such as another speaker, your phone, or another device with Bluetooth capability.
When the blue light is flashing, you need to follow the pairing instructions in your device’s user manual to connect your device to the Anker speaker. Depending on the device, you may need to enable Bluetooth or turn on Wi-Fi to make the connection.
Once the devices are paired, the blue light should stop flashing.
If the blue light does not stop flashing after trying to pair the devices, you may need to reset the speaker by pressing the power button for several seconds until the light turns off. You can then use the pairing instructions from the user manual to try pairing the devices again.
How do I turn on Anker Soundcore?
Turning on the Anker Soundcore is fairly simple. To begin, make sure that your device is adequately charged. To check this, connect the device with the included cable to an appropriate USB power source.
Once the battery indicator is lit up, the device is ready to use.
Next, press and hold the power button on the side of the speaker for one second. You will see a white indicator light that will turn off after two seconds. At this point, the Anker Soundcore should be in standby mode and ready to receive audio input signals.
To pair the device with another Bluetooth enabled device, press and hold the power button for about six seconds. The indicator light will then blink blue to signify the device is attempting to pair. On the other device, select the Anker Soundcore from the list of Bluetooth devices.
Once connected, you should be able to transmit audio.
The volume on the Anker Soundcore can be adjusted by pressing the volume up/down buttons on the side of the device. There is also an on/off switch on the rear of the speaker. This can be used to turn off the device when it’s not in use.
How do you do a party cast?
Hosting a party cast can be a great way to stay connected with friends and family all over the world. Below, we outline the steps to setting up and hosting a successful party cast.
1. Choose your platform: The first step to hosting a successful party cast is selecting the best video call platform for your needs. Popular video conferencing programs include Zoom, Facetime, Skype and Google Meet.
Consider the maximum number of people your platform can accommodate and choose one that will easily allow everyone you want to join to join in.
2. Invite your guests: Once you’ve chosen the platform, create an invite that includes the log-in information, and send it to your desired guests. Depending on your platform, you may be able to create a direct link that you can easily share as well.
3. Decide what you’ll do: Now it’s time to figure out the fun stuff—what you and your guests plan to do! Whether you hold an at-home movie night, play virtual party games, or simply chat and catch-up, the possibilities are endless.
For movie night, set a voting system ahead of time and decide on a selection everyone can watch on their own. For virtual games and activities, you can create a Kahoot trivia game or stream a workout session together.
4. Prepare for the event: Once you’ve decided what kind of event you’ll be hosting, it’s time to get ready. Check that your audio and video equipment is in working order, charge your laptop or device, and make sure your living space is presentable and comfortable for everyone.
5. Show up and have fun!: On the day of the party, have everyone join the group at the designated time and let the fun begin! Have a great time catching up with your loved ones and make sure to take some photos or videos.
Party casting can be incredibly rewarding and a great way to stay connected during times of physical distancing. With the right planning and preparation, hosting your own party cast can be a great success!.
How do I stop my Bluetooth speaker from disconnecting?
The best way to stop your Bluetooth speaker from disconnecting is to make sure it is close enough to the device it is paired with in order to maintain a strong connection. Modern Bluetooth technology allows devices to be connected up to a few meters away, but depending on the walls and other obstructions the connection can still weaken over time.
Keep the device and speaker within a few feet of each other more consistently to reduce the chances of the connection breaking.
If you are using your Bluetooth speaker with a laptop or phone, you should also check to make sure that the device has the latest version of its Bluetooth drivers and firmware. Many times, outdated drivers can cause connections to drop more frequently than expected.
Similarly, make sure the Bluetooth speakers themselves are up to date with their firmware as well.
Finally, check for any interference from nearby Bluetooth devices. Bluetooth operates on the same frequency as some wireless mouse and keyboards, and if placed too closely together the radio waves between two devices can interact and cause disconnects.
Move any wireless items out of the way and away from the speaker if you believe that is the cause.
Why does my Bluetooth randomly disconnect?
There could be any number of reasons why your Bluetooth connection is randomly disconnecting. While it is difficult to pinpoint an exact answer without further investigation, some of the most common causes of poor Bluetooth connections include interference from other wireless signals, power and battery issues, being out of range, and device compatibility issues.
Interference from other wireless signals: Bluetooth transmits data wirelessly over a 2.4 GHz frequency, and if there is too much wireless activity in the same space it can cause interference with the Bluetooth connection.
Wireless networks, cordless phones, and microwaves can all cause this issue.
Power and battery issues: Low battery or a poor power connection to the device can have an effect on the connection.
Being out of range: Bluetooth has a limited range, usually up to 30 feet. If the device you are trying to connect to is too far away, it may cause the connection to drop.
Device compatibility issues: If the device you are trying to connect to isn’t compatible with your Bluetooth settings, this can also cause the connection to drop.
If your Bluetooth connection continues to randomly disconnect, it is recommended that you contact the manufacturer of your device for further support and advice.
Why does my JBL Bluetooth speaker keep turning off?
The first is that you may be unintentionally turning it off with a remote control or other device. It’s also possible that the batteries in the remote control are running low and need to be replaced.
Additionally, if there is a power issue or if your device is connected to a weak or intermittent power source, this could cause the Bluetooth speaker to reset, resulting in it turning off. You could try switching to a different power source or checking the power cord and surge protector for any issues.
Lastly, it’s possible that if you’ve had your Bluetooth speaker for a while, the software may need to be updated. You could try downloading any available software updates from JBL’s website.