Resetting Raycon earbuds is relatively simple.
First, unplug the charging case from the power source and press the reset button located in the back of the earbud case, near the charging ports, using a paperclip or a similar object. Hold the button down for a few seconds and then release.
When you see the LED lights on the charging case turn from blue to red, your earbuds are now in the reset state. This can take up to 10 seconds.
Now, open the charging case, remove the earbuds, and put them back in the case after a few seconds. This will activate the reset process. Once this is complete, the charging case LED should turn back to blue.
Your earbuds are now reset and ready to be used!.
What do you do if your raycon earbuds won’t connect?
If your Raycon earbuds won’t connect, there are several steps you can take to try and remedy the issue:
1. Toggle the Bluetooth connection on your device: Make sure that your device is in discoverable mode and that Bluetooth is turned on. Then, reconnect your Raycon earbuds to the device.
2. Check your charging port: if your charging port is loose or damaged, this could affect the connection. Make sure it’s firmly connected and that there are no loose components in the port.
3. Reset your device’s network settings: Depending on the device, you might need to reset the device’s network settings to connect your earbuds. This will erase any saved networks or pairing information.
4. Perform an update: If you haven’t updated your Raycon earbuds in a while, this could be the cause of the connection issue. Make sure that your earbuds are running the most up-to-date version of the firmware.
5. Reset your earbuds: This will erase all pairing information and reset your earbuds to factory settings.
6. Contact customer support: If you are unable to find a solution after trying the steps above, you may want to get in touch with Raycon customer support. They can help you troubleshoot the issue and potentially provide solutions to get your earbuds connected.
What does it mean when my raycon earbuds flash red and blue?
When your Raycon earbuds flash red and blue, it typically indicates that they have entered pairing mode and are now ready to be connected to another device. The initial pairing process may require both devices (in this case, the Raycon earbuds and the device you wish to pair with) to be close together for a successful connection.
To connect the Raycon earbuds to a device, you can typically open the Bluetooth settings on the target device, find the Raycon earbuds from the list of available Bluetooth devices, and select them to initiate the pairing process.
Once connected, you should be able to hear audio from your device through the Raycon earbuds.
Can you wear Raycons in the shower?
No, you cannot wear Raycons in the shower. Raycons are true wireless earphones and are water-resistant, but not waterproof. Wearing them in the shower could likely cause damage to the protective coating, which would affect the sound quality and possibly even cause a short-circuit.
Additionally, moisture could accumulate in the earbud and cause rusting, leading to reduced sound quality. For extra protection, it is best to keep Raycons away from water and any other liquids.
What do the lights on raycon earbuds mean?
The lights on Raycon Earbuds indicate the status of your device in relation to power, connectivity, and audio playback.
The blue light, located near the right earbud, will flash briefly when your earbuds power on, or light up when you initially pair with your device. On some models, another blue light, on the left earbud, will flash to indicate successful pairing.
The white light, located in the middle of the earbuds, will light up when your device is connected. It will typically be on unless your device is powered off.
When there is an audio signal, a red light near the left earbud will blink, to signal that your audio is playing.
If you notice the lights either flashing steadily or blinking intermittently, it could be an indication that there is an issue with the battery or signal. Try resetting your earbuds by charging them, turning them on and off, or reconnecting them to your device.
If your issue persists, reach out to Raycon’s customer service team for assistance.
Why is only one of my raycon earbuds working?
When only one of your Raycon earbuds is working, it could point to a few possible causes. The most likely cause will be that one of your earbuds has a defective battery or connection, which can happen during shipping or from normal wear and tear.
Another possible cause may be that one of your earbuds has a defective driver. Drivers can experience a wide range of issues and can sometimes be affected by any number of outside factors, including moisture, dust, or just general use.
If you determine that battery depletion or faulty connection is causing your problem, it’s likely that simply charging your earbuds will fix the issue. However, if you suspect that the driver is causing your problem, it’s possible that the earbud needs to be serviced or replaced altogether.
It may be worth taking a look at the troubleshooting guide found on the Raycon website. There’s a wealth of information available including helpful tips and advice, and information on setting up, connecting and reconnecting your earbuds.
If these resources are of no help and the issue persists, it may be worth contacting Raycon customer service for assistance. Their team of experts can assess the earbud, provide a repair or replacement, and answer any other questions or concerns you may have.
Why is my raycon case blinking white?
Your Raycon case may be blinking white because it needs to be charged. Raycon cases have an LED light indicator that turns red when charging is needed. Charge your Raycon case by plugging it into a USB port or power outlet and wait for the LED light to turn off.
Additionally, if you recently used your Raycon and the light is blinking white, it could be an indication that the battery is running low. So make sure to keep your Raycon case charged to reduce any potential issues.
How do I know if my battery is raycon?
To know if your battery is a Raycon battery, you need to first determine the make and model of your battery. If the battery is a Raycon battery, it will be clearly labeled as such. Otherwise, you can also identify Raycon batteries by their distinctive red and gold coloring.
Raycon batteries will usually have red and gold lettering with the Raycon logo printed on the side. Additionally, you can reach out to the manufacturer to find out if your battery is a Raycon. Once identified, you can then purchase the correct battery charger or other pertinent accessories for use with your Raycon battery.
How can I charge my Raycons without a case?
Charging your Raycons without a case is relatively simple and straightforward. To start, make sure the charging cable is firmly connected to a power source, like a power outlet or an active USB port.
Next, plug the USB-C end of the cable into the port on the side of your Raycons. This port may look similar to a headphone jack, but will be slightly bigger. Once these steps have been completed, your Raycons will begin to charge.
To monitor the battery status, you can view the LED light on the side of the Raycons—it will be green when the battery is full, orange when it is charging, and red when charging is complete. Repeat this process when you need to charge your Raycons without a case.
How long does it take for Raycons to charge?
Raycons take approximately 1.5-2 hours to fully charge, depending on the amount of charge already on the headphones. However, a quick 15-minute charge should give you about 3 hours of listening time.
To charge your Raycons, use the included micro USB cable to connect the headphones to a USB power source, such as a laptop or powerbank. A fully charged pair of Raycons will provide up to 8 hours of playtime.
How long do Raycons last?
Raycons offer long-lasting power when used with an approved charging cable. Depending on usage conditions and components, Raycon earphones can last up to 10 hours on a single charge. To ensure the most battery life, it is important to use the supplied charging cable and turn off the earphones when not in use.
Additionally, Raycons come with an auto shut-off feature that will switch off the earphones after 40 minutes of inactivity. When the earphones are on an especially low charge, it may take up to 3 hours to fully charge.
Regardless, with a full charge and proper usage, Raycons can last up to 10 hours.
Is there a raycon app?
No, there is not currently an app for Raycon. However, Raycon provides a variety of other ways to shop and engage with the company. Raycon’s website features extensive product information and resources, including product reviews from customers.
Raycon also has a YouTube channel, Facebook page, and Instagram account, which all offer tips and updates about Raycon products. Additionally, Raycon Live and Raycon Live Elite are subscription clubs that allow members special access to products, exclusive discounts and offers, free gifts, and more.
Why is my raycon flashing red and blue?
If your Raycon earbuds are flashing red and blue, then it indicates that it is in pairing mode. This means that it will look for a Bluetooth device to connect to. To resolve this issue, make sure that your Bluetooth device is on until the Raycons have successfully connected.
Another thing to check is that you are in the correct location. In order for the connection to work properly, the device should be within 10 meters of the earbuds. You should also disconnect the earbuds from any previous devices they were connected to.
Once everything is correct, you should be able to find the Raycon earbuds in your Bluetooth settings on your device and pair them. If after all these steps it is still flashing red and blue, you should reset the earbuds and try again.
Can you pair 2 different raycon earbuds?
Yes, it is possible to pair two different Raycon Earbuds. You can do this directly from the connected device such as a smartphone or laptop. To do this, first put both of the earbuds into pairing mode.
On each earbud, press and hold the power button for about 3 seconds until the LED light begins to flash. Once both earbuds are in pairing mode, open up the Bluetooth settings on the connected device, then search for each earbud.
Select the earbud you want to connect to your device and wait for the connection process to finish. Once the connection is complete, you should now be able to listen to audio through both earbuds at the same time.