Setting up your Coleman swimming pool is an easy process that requires some basic tools and supplies.
1. First, you’ll need to assemble the frame and walls of the pool. Depending on the size and model of your Coleman pool, the setup instructions may be different. Refer to the Coleman manual for specific instructions for your exact model.
2. After the frame and walls are properly assembled, you’ll need to install the pump and filter. If applicable, connect the pump and filter to the wall of the pool according to the instructions given.
3. Fill the pool with water until it reaches the desired depth indicated in the manual. Note that it may take several minutes for the pool to fill completely.
4. Once the pool is full, you can begin to add the required chemicals for water sanitation. Sanitizing chemicals can be bought from your local pool supply store. Make sure to read the instructions on the chemical packaging before beginning to add them to your pool.
5. Finally, set up the pool’s safety ladder or other safety equipment according to the instructions provided. With your safety equipment installed, your pool is now ready for use.
Be sure to perform safety checks regularly, including carefully checking pH levels, replacing the filter regularly and treating the water with chemicals as needed to prevent any bacteria or fungus growth.
Always follow the instructions in the Coleman manual to make sure your pool is safe and sanitized.
How do you assemble a Coleman above ground pool?
Assembling a Coleman above ground pool is a straightforward process with the right preparation and the proper equipment and supplies. The first step is to determine where to place the pool in your yard.
Make sure that the area is level and clear of any debris. If you need to clear the area, use a rake or shovel to smooth and flatten the ground.
Next, unroll the Coleman pool liner and spread it out on the ground. Make sure that it’s smooth and even with no wrinkles. Following instructions included with the pool, assemble the wall and frame. Secure the wall to the frame using the appropriate hardware and tools.
Then, lay the pool liner on the wall and frame. If a liner pad is included with your pool, lay it down first. Secure the liner in place using the clips that come with your pool. Make sure that the liner is pulled tightly and evenly to prevent wrinkles.
Once the liner is secure, attach the skimmer and return fittings. Refer to the manufacturer’s instructions for proper installation. Fill your pool with water and once it’s full, add water treatment chemicals as directed by your pool’s manufacturer.
After that, attach the filter system and pump, if your pool came with one. Plug in the pump and allow the water to circulate for 24 hours for maximum effectiveness. During this time, adjust the water level as needed to ensure that the water covers the skimmer and return fittings.
Finally, install the ladder and other pool accessories. Now that the pool is assembled, you’re ready to enjoy the cool waters of your Coleman above ground pool.
Should I put sand under my Coleman pool?
Using sand under your Coleman pool is a great way to provide a level and cushioned surface to prevent liner damage and provide extra support. It also helps create a more even base and decreases the risk of underground water pockets, which can cause the liner to sag.
Before you place sand underneath the pool, make sure that the ground is smooth and free from sharp objects or rocks that could puncture the liner of the pool. Additionally, the sand should be spread as evenly as possible before you lay out the pool liner.
It should also be placed at least four to six inches thick for adequate cushioning for the bottom of the pool. It is important to note that placing sand underneath the liner does not replace investing in a pool pad since the sand will eventually be absorbed into the ground.
Finally, make sure the sand is not made with limestone or shell gravel, because this can cause the water in the pool to become cloudy or discolored.
What can I put under my Coleman above ground pool?
When setting up your Coleman above ground pool, it is important to consider what you are going to put underneath it. You will want to make sure you have a strong, secure and even surface to support the pool and its contents.
Depending on the size of the pool, you may need to reinforce the surface underneath it to withstand the weight of the water and swimmers. The best material to put under the pool will depend on your individual circumstances and the best option for you.
For example, as a short-term solution, you may choose to use a tarp or some other flat material as a protective barrier. This can protect the ground beneath the pool from dirt and debris, while also providing a smooth base layer.
For a little more stability, you can use a layer of plywood or treated lumber. A thicker sheet, such as a ¾-inch sheet of plywood, can be attached directly to the pool to help spread the weight of the pool and its contents.
If the pool is to be in place for a longer period of time, you may want to consider using concrete pavers or interlocking deck tiles. These can be laid directly on an appropriate substrate, and are strong enough to support the weight of the pool, as well as its contents.
It is important to note that even the best types of materials may not offer enough support and stability for the pool if not used in conjunction with other materials, such as gravel. Gravel should be used underneath the pool, between the substrate and the layer of material used directly beneath the pool, in order to provide strong support, additional stability and proper water drainage.
How do I level my ground for a pool without digging?
Leveling the ground for a pool without digging is possible but requires a bit of preparation and additional materials. To begin, you’ll need to use a heavy-duty rake to remove any large rocks, sticks, or other debris from the area where you plan to install the pool.
You’ll then need to use a flat-blade shovel to scrape the surface of the ground until it’s relatively flat. If there are any large dips or bumps in the ground, you’ll need to use a compactor or tamper to flatten them out.
Once the ground is dull, you’ll need to find a suitable material to create a base. Sand works well for this, as it’s easy to spread and settle into any nooks and crannies. You may also opt to use gravel as a base material.
Once the base is in place and leveled, you can then begin the installation of your pool.
Do I need blocks under pool legs?
Yes, you need blocks under pool legs in order to keep the pool stable and secure. Pool blocks provide extra support to the area beneath the pool, which is important when you’re running electricity to your pool pump, or when you have people in the pool.
They also stop the pool from sinking into the ground, or shifting when the ground beneath moves.
Pool blocks are typically made of a heavy, durable material like concrete or plastic. Depending on the type of pool you have, the size of blocks required may vary. It’s important to ensure that the blocks used are of proper size and weight so that your pool remains level and secure.
In addition to providing stability and support, pool blocks also help protect nearby structures from pool-related damages. They act as a buffer between the pool and other structures such as houses, fences, and trees.
To ensure optimal protection, install the pool blocks a few inches away from the nearby structures.
Pool blocks are an essential component of any pool setup, so make sure you get the right ones to keep your pool stable and secure.
What sand is to put under a pool?
For safety, it’s important to put sand beneath your above-ground pool to provide a soft, even surface. It also provides cushioning, reducing potential damage due to accidental impacts. The type of sand you use should be coarse, such as river sand or masonry sand.
Do not use play or beach sand due to the small grains of sand, as they may clog up the pool filter or liner.
Before beginning the project, be sure to measure the area where the pool will go and purchase the correct amount of sand. Generally, 4-6 inches of sand is recommended for above-ground pools. To more evenly cover the ground, you should spread out the sand, then use a rake and tamper to compact it.
This will help minimize the likelihood of settling and can make the sand easier to level.
Once it is compacted, use a level to ensure the surface of the sand is even. This is important for the integrity of the pool’s frame, as well as for safety. Once you are satisfied with the evenness, you can begin assembling the pool, typically following the instructions provided.
Sand provides a safe, even surface for the construction of above-ground pools, so be sure to install it properly to ensure an even playing field and a safe pool environment.
How many gallons of water does a Coleman 16×10 pool hold?
The Coleman 16×10 pool holds 1,018 gallons of water when filled to the top. However, it’s recommended to not fill the pool to the brim, as it can cause overflow or overflow damage. It’s advisable to fill the pool to 90-95% of its capacity, which would be about 917-967 gallons of water.
In addition, it’s important to note the make-up or source of water for the pool, as localized water may be harder or softer, necessitating chemicals or other materials to counterbalance the water hardness and make it safe for swimming.
How many gallons is a Coleman Power Steel Deluxe Series?
The Coleman Power Steel Deluxe Series is available in several different pool sizes, so the number of gallons it can hold will vary based on the size of the pool. Generally, the Coleman 18′ x 48″ Power Steel Deluxe Frame Pool holds 5,455 gallons of water, the Coleman 24′ x 52″ Power Steel Deluxe Frame Pool holds 8,403 gallons of water, the Coleman 26′ x 52″ Power Steel Deluxe Frame Pool holds 10,097 gallons of water, and the Coleman 28′ x 52″ Power Steel Deluxe Frame Pool holds 11,908 gallons of water.
Who owns Coleman pools?
Coleman Pools is owned by Bestway Group, a privately owned business based in Warrington, United Kingdom. They are the world’s leading designer, manufacturer, and distributor of above ground swimming pools and accessories, air beds and furniture, in-house leisure products, and camping products.
The company was founded in 1994 and has since grown to become an international brand. They have offices in 11 countries and sell their products in more than 80 countries. Bestway Group employs over 1,000 people and has 11 manufacturing and distribution centers strategically located throughout the world.
They are committed to continually developing fun, quality products designed to help people enjoy the outdoors and their leisure time together.
Is Bestway the same as Intex?
No, Bestway and Intex are two different companies. Bestway is an international leisure product provider that provides consumer-friendly airbeds, pool-care products, and other recreational products. Established in 1994, Bestway is now a global leader in the manufacturing and distribution of above-ground pools, airbeds, spas, and other leisure products, as well as a comprehensive range of pool-care products.
Intex is a global leader in consumer inflatables with headquarters in Long Beach, CA. Founded in 1996, Intex provides an extensive range of above ground pools, airbeds, toys, boats, and much more. Intex products are manufactured to the highest quality standards, designed for maximum safety, comfort, and durability as well as for affordability and convenience.
Are Coleman pools made by Bestway?
No, Coleman pools are not made by Bestway. Coleman pools are made by The Coleman Company, formerly known as Coleman Worldwide, which is a company based in Wichita, Kansas that specializes in outdoor recreation products.
Coleman pools are made of rugged 3-layer-dura-tech material that offers superior strength and rigidity. They also come with accessories such as ladders, covers, lights, and filters. Bestway pools, on the other hand, are made of strong yet lightweight Tritech material, making them easier to set up and move around.
Bestway pools also have a wide variety of accessories available.
Where are Bestway pools made?
Bestway pools are manufactured in several countries including China, the United States, and India. Depending on where you purchase the pool from, it is likely that the one you buy was made in the closest country to you; for instance, if you were in the US, you would likely get a pool that was made there.
Many of their products are manufactured by companies in China and India which then send them to be sold around the world. Bestway provides superior quality, affordable products that are strong, durable, and built to last.
They also strive to develop products that exceed international standards of quality, safety, and reliability.
Who makes Intex swimming pools?
Intex swimming pools are manufactured by Intex Recreation Corp. , a subsidiary of Intex Development Co. , Ltd. , a manufacturer of above-ground pools, spas, airbeds, and other durable outdoor products.
Both companies are headquartered in Long Beach, California. Intex pools are sold internationally, in over 100 countries, through a global network of dealers. Intex carries the world’s largest variety of above-ground pool shapes and sizes, so that customers can select the pool that best suits their needs.
The company was founded in 1996, and it has grown to become the worldwide leader in above-ground pool sales. Intex pools are also known for their quality and affordability, offering superior durability without breaking the bank.
The company takes pride in offering quality products and customer service, with a highly-expert team of engineers and technicians on hand to answer questions and make sure that customers are completely satisfied.
With Intex, customers can rest assured that they are getting a high-quality pool that will provide years of summertime fun.
How do I contact Coleman?
The best method would be to visit their website at www. coleman. com. On the website, you will find a “Contact Us” page with a variety of different contact options such as phone numbers, email address, mailing address, and online contact forms.
The website also includes directions for how to contact an authorized Coleman dealer if you have an issue or question that relates to a specific product or piece of equipment. Additionally, you can follow Coleman on various social media platforms such as Twitter, Facebook and Instagram for any questions or updates.