In order to turn your iPhone 13 back on, you can press and hold the power button (also known as the Side Button) located on the right side of your iPhone for a few seconds. After a few seconds, the Apple logo will appear on the display.
Once you see the Apple logo, you can release the power button. If you have enabled the passcode lock on your iPhone, then you will be asked to enter the passcode on the screen. Once you have entered the passcode, your iPhone will be successfully turned on.
What do you do when your iPhone 13 screen goes black?
If your iPhone 13 screen has gone completely black, the first thing you should do is check to make sure the device itself is still powered on. To do this, press and hold the power button and see if the Apple logo appears or you hear the sound of an alert.
If the phone is still powered on, then the next step is to force restart it. To do so, press and hold the power button and volume down button for about 10 seconds. If the Apple logo appears after doing this, it should boot up and you should see the screen back to normal.
If your iPhone 13 screen still doesn’t turn on and remains black after repeating the above steps, you will need to bring the device to an Apple store or a nearby authorized service provider to have it looked at.
The experts there may be able to diagnose the problem, either by using their specialized tools or having the device run a diagnostic. In the event the iPhone 13 needs repair or replacement, they will then be able to help you obtain the necessary parts to get it back up and running again.
How long does it take a dead iPhone 13 to turn on?
It usually takes between 2-3 minutes for a dead iPhone 13 to turn on. Factors such as the amount of data stored on the iPhone, the age of the device, battery health and other hardware factors can all determine the exact time that it takes to turn on.
Additionally, if the device was completely powered down and not connected to a charging source for an extended period of time, it may take longer for it to turn on. In order to speed up the process, it’s important to have the device connected to a power source when attempting a power up.
If you experience any issues when the device powers on, it’s recommended to take it to an Apple Store or certified repair technician for further diagnosis and assistance.
What do I do if my iPhone is not turning on?
If your iPhone is not turning on, your first step should be to reset your device by pressing and holding the Sleep/Wake (Power) button and the Home button at the same time until the Apple logo appears.
This will turn your iPhone on and may help resolve any technical issues.
If a reset doesn’t work and your device is still not powering up, you may want to try plugging it into a computer or wall charger to fully charge it. If it is already charged, you may want to check the charging port for any dirt or debris, and use a cotton swab to clean it.
If that doesn’t work, you may have a hardware problem and should take your device to an Apple store or authorized repair center to have it checked out. The store will likely be able to diagnose the issue and advise you on any necessary repairs.
What causes iPhone Black Screen of Death?
The iPhone Black Screen of Death (BSOD) is a fairly common issue that affects a wide range of iPhone models. The cause of the issue is difficult to pinpoint as it can range from hardware issues to software issues.
The most common causes for iPhone Black Screen of Death include physical or liquid damage, software glitches or out-of-date operating systems, and corrupted or invalid files.
Physical damage to the device, such as a drop or liquid spill, may cause the iPhone to suddenly stop working, resulting in the black screen. Damage to the internal components of the phone can prevent the software from loading properly.
Software glitches and outdated operating systems often play a role in the iPhone Black Screen of Death. Problems with the iOS itself can result in the phone suddenly dying, leaving the user with a blank screen.
Additionally, viruses and other malware can cause issues with the device, resulting in the black screen.
Corrupted or invalid files can also cause the iPhone to suddenly go black. This can occur as a result of a system crash or after failed attempts to jailbreak the device. Invalid data stored on the phone can cause the phone to freeze or go in a loop, leading to the Black Screen of Death.
In some cases, the BSOD can be resolved easily. A force restart can sometimes fix the issue, although if the problem stems from hardware damage, this will not be of much help. If the problem is caused by corrupted files or an out-of-date operating system, restoring the device as new can often solve the problem.
However, if the problem persists, it may be necessary to take the device into an Apple store for repair.
How do you fix an iPhone that wont turn on or charge?
If your iPhone won’t turn on or charge, there are a few steps you should take to try and troubleshoot the issue.
First, check to make sure the charging port is clean. Visually inspect it and if need be, use a cotton swab and rubbing alcohol to clean away any lint or dust. You can also test a different power source to make sure it’s not a power supply issue.
If the port is clear and you are still not seeing any charge, it may be an issue with your battery. If a battery is completely drained, it won’t come back on right away and you may need to charge it for up to 30 minutes.
If that doesn’t help, then you may need to try a different charger or cable.
It’s possible that the problem may be caused by a software issue, too. If you haven’t had any recent errors or problems with your iPhone, you can try a hard reset. Try holding down the Home Button and the Power Button at the same time until the Apple logo appears on the screen.
If none of these troubleshooting steps resolve the issue, chances are there’s a problem with the hardware of your iPhone and you may need to take it to Apple to have it looked at by a professional.
Why won’t my phone turn on even though it’s charged?
There could be a few possible reasons for why your phone won’t turn on even though it’s charged. First and foremost, you should check the power source and cable to make sure nothing is damaged. If that is not the issue, some other possible causes could be the battery could be completely drained, the charging port may be damaged, the operating system could have been corrupted, or certain settings may have been changed within the software.
You should also consider resetting the phone to its factory settings, as this might help. If that still doesn’t do the trick, you may need to take it to a phone repair shop and take a look at the hardware to identify any issues.
Where is the power button on the iPhone 13?
The power button on the iPhone 13 is located on the right side of the phone. It has been moved from the top of the phone on the iPhone 12 models to the right side on the iPhone 13 models. It is now located along the side of the phone, just below the volume buttons and the mute switch.
To power the device on or off, press and hold the power button until the “Slide to Power Off” screen appears, then slide the switch to the right.
Why doesn’t my iPhone wake up when I touch the screen?
There could be a few different reasons why your iPhone may not be waking up when you touch the screen. The most common culprit is that your iPhone’s Raise-to-Wake feature may not be enabled. If you go to Settings > Display & Brightness, you can toggle the Raise to Wake option on and off to determine if this is the issue.
Another possible cause could be a software issue. It is possible that having a corrupt system file is causing your iPhone to misbehave. You can try restarting your iPhone to see if that resolves the issue.
It’s also possible that your device has a hardware issue, you should check and make sure that your screen isn’t cracked or damaged in any way– as this can interfere with the phone’s touchscreen. Additionally, check the screen for any debris that may be blocking areas of the display.
Finally, if all else fails, you may need to take your device to a technician for repairs. They can rule out any hardware or software issues causing the device to malfunction.
Why won’t my iPhone wake up?
So it may take a bit of troubleshooting to figure out the exact cause.
If your iPhone won’t wake up when you press the Home button or when you connect it to a power source, it’s likely that your battery has drains. If your iPhone won’t wake up when you press the Side button, it’s likely that your battery may have drained completely.
If your iPhone still won’t wake up after connecting it to a power source, it’s possible that the display may be frozen or stuck on a black screen. This could be caused by a software bug or incompatible app.
In this case, you could try a Force Restart. You can do this by holding down the Home and Side button at the same time until the Apple logo appears.
Finally, if your iPhone still won’t wake up after a Force Restart, it may be time to bring your device to an Apple Store or Authorized Service Provider to get it fixed.
How do you restart an unresponsive iPhone?
If your iPhone is unresponsive or frozen, you can restart it by following these steps:
1. Press and hold down the Sleep/Wake button (located on the top or side of the device, depending on model) for several seconds.
2. If nothing happens after about 10 seconds, press and hold down the Sleep/Wake button and the Home button (the circular button located underneath the display) for about 10 seconds until the Apple logo appears.
3. Once the Apple logo appears, the iPhone will start up again, and you can unlock it by entering in your Apple ID password if required.
If restarting your iPhone does not make it responsive, you may need to force restart or reset your iPhone. To do this, press and hold down both the Sleep/Wake button and the Home button until the Apple logo appears.
How do you fix a blank phone screen?
Fixing a blank phone screen can be a tricky task depending on the cause of the issue. If the phone has a removable battery, first try unplugging it, waiting 30 seconds, then replace it and restart the device.
If the phone has a non-removable battery, press and hold the power and volume buttons together for 30 seconds and try to restart the device.
If these methods don’t work, then try connecting your phone to a computer via a USB cable. If the computer can recognize your device, then you may be able to use software or a firmware update to restore your screen.
You can then run a system reset or attempt to flash a new factory image of your phone’s operating system.
If your phone still does not start up, it might be due to a hardware malfunction and you may need to consult a specialist to diagnose the issue. It is also worth noting that performing a factory reset to resolve this issue may erase any data stored on the device.