Turning on the Bluetooth on your Doss speaker is simple and straightforward. First, make sure that the speaker is powered on. Then, press the ‘Bluetooth’ button on the side of the speaker, which will cause the Bluetooth LED to blink.
Now you’ll need to pair it with an audio source device – to do this, make sure that Bluetooth is enabled on your device. On your device, look for the Doss speaker in the list of available Bluetooth devices – typically, it will have Doss in the name.
Select it, and after a few seconds your device should be paired with the speaker and you should be able to listen to audio on it.
Why is my DOSS SoundBox not connecting?
If your DOSS SoundBox is not connecting, there are a few possible causes that could be contributing to the issue. The most common problem is that the Bluetooth on your device is either turned off, or not set to be discoverable.
Additionally, the volume of your DOSS SoundBox may be turned down, so make sure that it is turned up. Furthermore, your device may not be close enough to the sound box for the connection to work properly.
Finally, the DOSS SoundBox may require you to turn it off and on again in order to reset the connection. If these steps do not help, there may be an issue with the hardware of the DOSS SoundBox, and you should contact customer support for assistance.
How do I connect my DOSS Bluetooth speaker to my iPhone?
Connecting your DOSS Bluetooth speaker to your iPhone is a relatively easy process. First, ensure that your speaker is powered on, and then put your iPhone into Bluetooth pairing mode. You can do this by going to the Settings app and then tapping on Bluetooth.
From there, you should be able to find the DOSS speaker in the list of available devices. Once you select it, a pairing code should appear on the speaker’s display and you need to enter that same code into your iPhone to complete the connection.
After that, your speaker should be connected to your iPhone and you should be able to start playing music or whatever content you would like to enjoy.
What does the mode button do on a DOSS Bluetooth speaker?
The mode button on a DOSS Bluetooth speaker allows you to switch between different functions. When you press the mode button, you are able to cycle between playback from a Bluetooth source, a 3.5mm Aux line-in connection, a USB connection, and a TF/micro SD card connection.
It also allows you to cycle between different sound EQ modes for improved sound performance. Additionally, for some DOSS Bluetooth speakers, the mode button also allows you to answer and hang up phone calls.
Is there an app for Doss SoundBox?
Yes, there is an app for the Doss SoundBox. The app is available from the Apple App Store and Google Play Store. The app allows you to control the Doss SoundBox from your iOS or Android phone. You can select the audio source, adjust the sound settings, and adjust the equalizer.
Additionally, the app provides Bluetooth connectivity and offers advanced playback functions, allowing you to control your music from anywhere. The app also provides support for streaming music from online services such as Spotify, Apple Music, and Amazon Music.
How do I know if my Doss speaker is fully charged?
To know if your Doss speaker is fully charged, you should check the LED indicator on the speaker. Whenever the LED indicator is solid blue, it means that the speaker is fully charged. If it is still flashing, then the speaker is not yet fully charged.
If the LED indicator is red or off, then the power supply may be disconnected or insufficient. You should make sure to plug the speaker in to a power source and make sure the power source is adequate before attempting to charge the speaker.
Additionally, you can check the battery level by pressing the Volume Up and Volume Down buttons together and then release them. The LED indicator will then show a corresponding number of flashes for the battery level (e. g.
3 flashes for about 30%) which indicates the current charge of the Doss speaker.
Why does my Doss SoundBox keep shutting off?
Possible explanations include: low battery life, a software issue, a hardware issue, a factory reset setting, or a connectivity issue.
If the battery life is low, charging the device will resolve the issue. If a software issue is the cause, downloading the correct drivers from the appropriate website can help. If the device seems to have a hardware issue, consider taking it into a repair shop.
Alternatively, if you suspect a factory reset setting, initially back up all your data, then reset the device to its original settings. Lastly, if it’s a connectivity issue, ensure that the device is connecting properly to the relevant network.
Is the Doss SoundBox waterproof?
No, the Doss SoundBox is not waterproof. This portable Bluetooth-enabled speaker is IPX4 splashproof, meaning it can withstand some moisture or water, but is not completely waterproof. It is not recommended to submerge or completely expose the SoundBox to water as it is not designed to be a waterproof speaker and doing so could cause damage.
How do I reset my Soundbok battery?
Resettingthe battery for your Soundbok speaker can be done in just a few simple steps. First, make sure the speaker is off and unplugged from the wall. Then, locate the reset button on the backside of the device.
It is typically a small recessed button. Once you locate the button, press and hold it for at least 10 seconds, or until you hear a confirmation beep. When you hear the beep, the Soundbok battery has been successfully reset.
Afterward, plug the power cord back in and turn it on. You should now have a fully reset Soundbok!.