Using the MoJack EZ is a simple process that can help you safely lift and maneuver a riding mower, tractor, or other outdoor power equipment. To start, park your outdoor power equipment on a flat, level surface.
Then, lift it up with the MoJack EZ. Make sure to place the included safety pins into the appropriate place on the of the MoJack EZ before lifting the equipment. When ready to lift, position the MoJack EZ with the four legs on the ground, releasing the locking pins before raising the arms of the MoJack EZ.
Adjust the legs of the MoJack EZ as needed until they firmly contact the frame of the outdoor power equipment, which will provide you with additional support. Next, position the lifting arms onto the lifting points on the outdoor power equipment or mower deck and lower them into place.
After verifying that the arms are securely in place, use the included crank handle to raise the outdoor power equipment to the desired height. When finished, use the included locking pins to secure the arms of the MoJack EZ in place.
To safely lower the equipment, simply reverse the steps. Lastly, when you’ve finished using your MoJack EZ, make sure to properly store it in a safe, dry location.
Where is MoJack made?
MoJack is proudly made in the USA, in the heart of America’s Midwest in Waterloo, Iowa. MoJack, LLC is a privately-owned company founded in 2010, rooted in the Cowboy spirit of hard work, innovation and never settling for less than the best.
MoJack’s mission is to provide artisan-level service and premium quality products that deliver solutions and value to keep their customers smiling. MoJack manufactures a complete line of outdoor power equipment lifts, carts and accessories that are designed and built right in Waterloo, Iowa.
Their products are not only designed to last, but to be easy to use, which is why their popular line of riding mower lifts has been a hit among homeowners and professional contractors alike.
Where are MoJack lifts manufactured?
MoJack lifts are manufactured in the USA. They are made in MoJack’s production facility in Wisconsin to the highest standards of manufacturing quality and safety. All MoJack lifts are powered by Honda® or Briggs & Stratton engines, and their frames are made from steel for maximum strength and longevity.
MoJack’s manufacturing process includes stringent quality testing, from start to finish. They have a full safety testing program in place to make sure their lifts comply with the latest safety regulations.
Their entire production process is regularly audited and reviewed to ensure the highest standards are being upheld. MoJack also offers a full line of accessories and replacement parts for their lifts.
How do you use a lawn mower Jack?
Using a lawn mower jack is a great way to raise your mower for maintenance and repair. To use a lawn mower jack, you will first need to find a flat and level surface on which to place the jack and mower.
Be sure to place protective boards or blocks on the sides of the mower if you are placing it on a hard, paved surface. Make sure the mower is fully off, the parking brake is engaged, and the blades have come to a complete stop.
Place the lawn mower jack on the flat surface and ensure it is secure.
Next, you will want to adjust the jack to fit the width of the lawn mower. Make sure the pins and notches are properly aligned and tightened, and the safety bar is in place. To lift the lawn mower, simply use the jack handle to turn the lever until the jack lifts the mower off the ground.
When the mower is securely off the ground, you will be able to access the underside for maintenance, cleaning, or repair.
Once the maintenance or repair has been completed, you will want to lower the mower back to the ground. To do this, you will need to tilt the jack handles and firmly lower the mower back down. Make sure the safety bar is still in place and the pins and notches are properly aligned and tightened as you lower the mower.
After the mower is fully back on the ground, double-check that the pins and notches are fully secured, and you’re then ready to mow again.
Where do you put the jack on a Cub Cadet?
When using a jack to lift a Cub Cadet tractor, you should position the jack at one of the jacking points provided on the underside of the frame. There are usually two jacking locations; one slightly behind and to the left of the right rear wheel, and the other slightly in front of and to the right of the left rear wheel.
Before you raise the tractor with the jack, you should place a block of wood or metal plate under the jack to provide a stable base that won’t sink into soft ground. Put the jack in position and make sure the saddle is firmly secured against the underside of the frame at the jacking point.
Once the jack is firmly in place, pump the handle and the tractor will start lifting. When it is nearly an inch off the ground, put the jack stands in position, lower the jack and the Cub Cadet will be lifted safely off the ground.
What is a Mo jack?
A Mo Jack is a multi-functional vehicle and equipment lift. It is ideal for outdoor use, as it can maneuver over any type of terrain and can lift a variety of vehicles and equipment up to 6,000 pounds.
Mo Jack is a great tool for commercial or residential use and can provide access to hard-to-reach spaces for a variety of maintenance and repair needs. It features dual-position locking, 360-degree rotation, and hydraulic foot pump operation.
The built-in adjustable extensions can be used to accommodate a wide variety of vehicles and equipment, while the 8000-pound capacity allows you to take on tougher tasks. Plus, it is designed with heavy-duty jacks and superior safety features to ensure the safety of you and your equipment.
The Mo Jack is a perfect tool to have around if you’re in need of some serious lifting power.
What is the hydraulic lift?
The hydraulic lift is a technology used to lift or move heavy loads. It works on the principle of Pascal’s law, which states that “for a given force applied to a confined liquid, the pressure at every point in the container is the same”.
This is made possible by the use of a hydraulic cylinder, a device which utilizes the liquid pressure from a pressurized volume of liquid to generate a force in a direction perpendicular to the applied force.
The hydraulic lift was patented in 1817 by Joseph Bramah of England. By utilizing a liquid in a confined vessel, Bramah was able to create a greater level of force than could be achieved from a purely mechanical system.
The basic design of a hydraulic lift consists of two closed cylindrical chambers connected by a piston. In the first chamber, liquid is pressurized using a hand pump or motorized pump. This is what pushes the piston up, which in turn pushes the second cylinder up.
Today, hydraulic lifts are used in a wide range of applications, including: automobiles, agricultural equipment, elevators, aircraft, medical equipment, and construction machines. Not only are they able to generate high levels of force, they are also able to be operated remotely, making them useful in difficult to access places.
Can you lift a zero turn by the deck?
No, you should not lift a zero turn by the deck. Zero turns, like riding mowers, are typically designed with a center-of-gravity point below the center of the deck. This allows the machine to stay safely grounded while moving around.
When the center of gravity is lifted higher than the deck, it can cause the machine to become unstable and potentially tip over with dangerously unpredictable results. Additionally, attempting to lift the machine can strain and damage the lift system, hoses, and other critical components.
For safety and longevity it is best to move a zero turn using the towing hooks or other tow system provided by the manufacturer or included as an accessory.
How do you sharpen riding lawn mower blades without removing them?
Sharpening riding lawn mower blades without removing them is a relatively straightforward process. If your mower has detachable blades, you can simply prop the mower up on blocks and use a file or grindstone to sharpen them while they are still attached.
If the blades are not removable, you can prop the mower up and use a handheld power grinder to sharpen them. When sharpening the blades, try to keep the angle of the file or grinder at the same angle as the blade edge.
Be sure to wear safety glasses and gloves when doing this as there can be sparks flying when the metal is excessively ground. Sharpen the blades to a sharp, pointed edge and make sure not to grind too much of the metal away as this can weaken the blades, leaving them prone to chipping or cracking.
Once finished, check the grinding surface for any rough patches and smooth them out if necessary. Finally, reattach the blades and ensure that they are properly secured.
How do you jack up a riding lawn mower with a car jack?
First and foremost, it is important to make sure your riding lawn mower is in a safe and level area. Once you have ensured that the ride lawn mower is placed securely in a level area, the next step is to gather the necessary tools.
You will need a car jack and a couple of blocks or pieces of wood that are larger than the width of the car jack.
Once you have gathered your tools, you need to place a block on either side of the lawn mower so that it is wedged securely between the blocks. This helps ensure that the lawn mower is stable during the jacking process.
Then, place the car jack underneath the grass mower on an area that is easy to access and place the jack on the side of the mower where you want to lift it. After this, start to use the car jack to lift the mower up to the desired height.
To ensure that the mower is stable, you can place the wood blocks under the car jack while the mower is being lifted.
Once you have achieved the desired height, you can then remove the blocks and begin to work on the lawn mower. When you’re finished, it is important to lower the grass mower to the ground in a slow and steady manner before you remove the car jack.
Once the jack is removed and the mower is back at a safe height, you can check to see that the mower is once again level before you use it again.
What automotive lifts are made in the USA?
There are numerous automotive lifts that are made here in the United States. One of the most popular models is the SP-7000 from BendPak, which is a two-post lift. It can lift up to 7,000 pounds and features oversized columns, which adds to its stability and overall strength.
The DF-7000 from BendPak is another two-post model, but is slightly lighter than the SP-7000. Atlas Garage Pro is another popular model, with both two-post and four-post options. The two-post models feature individually adjustable columns, allowing for unique adaptability.
Rotary also offers several different models, including their Mid-Rise and Maxima features. Both models feature a curved uprights, while the Maxima will lift up to 10,000 pounds. Finally, Forward Lift offers a mid-rise scissor lift, which will fit under most low clearance vehicles.
This lift is designed to be portable and requires very little maintenance. Depending on the project at hand, all of these car lifts made in the USA are great options and will help to get the job done.
Are BendPak lifts made in China?
No, BendPak lifts are not made in China. BendPak lifts are designed in the United States and manufactured in Taiwan. The company has created their own high-quality manufacturing facility in Taiwan and has been making their lifts since 1975.
This facility is equipped with advanced machinery, software, and materials to satisfy the highest standards of automotive service equipment production. The result is a product line of reliable and safe lifts that have earned BendPak a reputation for being at the forefront of exceptional service equipment.
Are Rotary Lifts Made in the USA?
Yes, Rotary Lifts are manufactured and assembled in Madison, Indiana, USA. Rotary has been a family-owned business since 1925 and has been making quality vehicle lifts in the USA ever since. Over the years, the company has invested millions in technology that allows them to produce the highest-quality lifts in the world.
Their advanced designs and processes have earned the company their place as the premier lift manufacturer in the automotive aftermarket. With each product, Rotary crafts lifts and other accessories that are designed to last and stand up to rigorous conditions in the shop.
Additionally, every lift is safety tested and approved to meet the highest automotive industry standards. When you purchase a Rotary Lift, you are assured that it was made with the highest-quality materials and designed to meet stringent quality standards.