Attaching a dado blade to a DeWALT table saw is easy to do. First, you must ensure that the saw’s riving knife is compatible with the dado blade by checking the saw’s instruction manual. A dado blade can be two inches wider than the arbor or the diameter of the saw blade.
Once the compatibility of the dado blade and saw arbor has been established, the process of attaching the blade to the saw is easily done by following the steps below:
1. Unplug the saw to ensure safety.
2. Remove the throat plate of the saw and set aside.
3. Unscrew the arbor nut with an arbor wrench and then carefully remove the saw blade.
4. Place the dado blade on the arbor of the saw with the teeth pointing in the direction of the arbor rotation.
5. Place the arbor washer evenly and then hold the dado blade in position.
6. Begin screwing the arbor nut until it is tight enough, but not too tight so that it won’t strip the threads of the arbor.
7. Plug the saw back in and check to make sure the dado blade is secure before you begin cutting.
By following these steps, you can easily attach a dado blade to a DeWALT table saw. It is important to always ensure safety by taking proper precautions, such as unplugging the saw before attaching the blade.
Additionally, make sure that all parts of the saw and dado blade, such as the arbor washer and arbor nut, are secure, and that the dado blade is properly aligned with the saw’s arbor.
Can a DeWALT DWE7485 use a dado blade?
Yes, a DeWALT DWE7485 table saw can use a dado blade. It comes with a 8-1/4″ dado throat plate and anti-kickback pawls to help maintain control when using a dado blade. This model is also equipped with an extremely precise markings and cutting range.
It can be used with standard blades, as well as dado blades ranging up to 13/16″ in width. The DeWALT DWE7485 table saw makes precise clean cuts in all materials and is a great tool for cutting dados, rabbets, and tenons.
What is the difference between DWE7480 and DWE7485?
The DWE7480 and DWE7485 from Dewalt are table saws with similar features. Both have a 15-amp motor, rip capacity of up to 24”, and a dust collection port. However, the main difference between the two models is that the DWE7480 has a 10” blade while the DWE7485 has an 8 ½” blade.
This difference in the size of the blade makes the DWE7480 more capable of cutting thicker pieces of material, however it is also more difficult to control and needs more power to run which shortens the battery life faster.
Additionally, the DWE7480 is lighter than the DWE7485, weighing in at 57 lbs, while the DWE7485 is slightly heavier at 60 lbs. Therefore, the DWE7485 is slightly better for more experienced woodworkers, while the DWE7480 is more suited for beginners due to its increased maneuverability and power.
How important is dado blade?
A dado blade is an essential woodworking tool, as it is used for making cuts and grooves in wood. The most common use for a dado blade is to create recessed shelves and dados in cabinetry and other furniture pieces.
It can also be used to make accurate rabbets, chamfers, grooves, and tenons. With the precise cutting angles of a dado blade, a variety of shapes can be quickly and accurately removed from boards and sheets of wood.
Overall, a dado blade is a very important tool when it comes to completing all kinds of woodworking projects. Not only does it allow you to create a variety of shapes and cuts, but it also makes these cuts with precision and accuracy.
In addition, the time it saves compared to hand-devised methods makes it a must-have tool for any woodworker.
What DeWALT table saw can take a dado blade?
The DeWALT 10-Inch Compact Job Site Table Saw (DW745) is capable of taking a dado blade up to 6” in diameter. This saw offers a 15-Amp motor and a 24-inch rip capacity, making it ideal for a variety of tasks.
It also has an on-board storage system for convenience and a dust extraction port to help keep your work space clean. Additionally, the DW745 comes with a push stick, miter gauge, 10-inch 24-tooth carbide blade, and other accessories.
With its lightweight design and portability, you can take it anywhere you need to make your dado cuts. The saw is designed to offer maximum performance and durability, so you can be sure it will get the job done right every time.
What size blade does a DeWALT DWE7485 take?
The DeWALT DWE7485 cordless table saw takes a 10-inch blade. This blade fits blade arbors with a 5/8-inch diameter and can be as thick as 3/32-inch. The DeWALT DWE7485 should be used with a blade that has 24 teeth for optimum performance, though you may be able to use blades with fewer teeth depending on what type of material you are using.
The DeWALT DWE7485 can be used with any type of blade and saw combination that includes a 10-inch blade and 5/8-inch arbor. Be sure to use the proper blade size, quality and teeth count to get the best results when working with the DeWALT DWE7485.
What replaced the DW745?
The DeWalt DW745 has been discontinued and replaced by the DeWalt DWE7480 10-Inch Compact Job Site Table Saw with Site-Pro Modular Guarding System. This saw has a 15-Amp motor that is capable of spinning the 10-Inch 24-Tooth carbide-tipped blade at 4,800 RPM for smooth, precise cuts.
It also has a powerful rip capacity of 20 inches, allowing you to make broader cuts with more ease. The DeWalt DWE7480 also features an integrated dust collection system to keep the work environment cleaner and reduce the risk of airborne particles spreading.
Additionally, it has an onboard storage system to conveniently store power cords, blades, wrenches, miter gauges and other accessories. Moreover, the Site-Pro Modular Guarding System allows for quick and easy tool-free adjustments as you move between jobs.
Overall, the DeWalt DWE7480 10-Inch Compact Job Site Table Saw is a great replacement for the DW745.
How much does a Dewalt table saw weigh?
The weight of a Dewalt table saw varies depending on the model. For example, the DW745 Compact Job Site Table Saw weighs 45lbs, while the DW746X 10″ Compact Job Site Table Saw weighs 60lbs. The much larger 10-inch Table Saw with Rolling Stand (DW7491RS) weighs 85 lbs, while the larger 12-inch Table Saw with Rolling Stand (DW7491X) weighs a whopping 100 lbs.
Does the DeWALT dwe7485 accept dado blades?
Yes, the DeWALT DWE7485 does accept dado blades. This saw is equipped with a blade guard assembly that removes for easy and secure dado blade installations. The dado blade can be fitted using the included arbor and your choice of a DEWALT or other quality dado blade.
The tool has a maximum cutting width of 13/16″ with a stacked dado blade. With a stacked dado blade, the dwe7485 can make rabbets and dadoes up to 13/16″ wide in a single pass, making it an ideal power tool for a variety of carpentry and woodworking tasks.
It also has the advantage of being able to work with a wide range of sizes, from a standard 7-1/4” blade to a dado blade up to 8” in diameter. With a maximum depth of cut of 2-1/8”, the DWE7485 can also handle a variety of cuts, from shallow dadoes to deep grooves.
How many teeth should a dado blade have?
The number of teeth a dado blade should have depends on the material and types of cuts that need to be made. A dado blade with fewer teeth will make coarse cuts, while blades with more teeth will provide a cleaner and more precise cut.
For materials like plywood, particleboard and other softer materials, 24 to 48 teeth should be sufficient. Harder woods such as oak usually need a dado blade with 60 to 80 teeth. In some cases, a dado blade with more than 100 teeth may be necessary to make a nice, smooth finish.
To reduce the chance of tear-out when making a dado cut, the blade should have a minimum of 8 teeth per inch. Very thin, delicate materials, such as veneers, will require a dado blade with fewer teeth to avoid damaging the wood.
What can I use instead of a dado blade?
If you don’t have a dado blade, you can use a circular saw to make a rabbet or dado cut. Start by setting the depth of your saw blade to the width of the dado cut you need. Then use a straight edge, such as a combination square, to mark a line on your workpiece.
Clamp a straight edge along the marked line, so that the edge of the saw blade follows it. Make sure that the saw blade is above the surface of the workpiece. Then make several shallow passes, gradually increasing the depth of the cut, until you reach your desired depth.
This method may require a bit of practice to master, so be sure to take all necessary safety precautions.