Attaching an overlay hinge generally involves four steps:
1. First, you need to prepare the door and jamb to accept the hinges. For example, if the door has an existing knob set, you’ll need to remove it and any associated trim, patch the hole, and sand away any rough spots.
You’ll also need to make sure the door is cut to the proper size, and is properly aligned with the jamb and frame.
2. Next, you’ll need to mark the hinge locations on the jamb. Generally, the lower hinge should be located about one-third of the way up the door’s height, and the upper hinge should be located about two-thirds of the way up the door’s height.
Additionally, you’ll need to make sure the hinges are all level, so you may need to mark the jamb with a straightedge.
3. Once the locations are properly marked, you’re ready to install the hinges. Using a screwdriver and the screws that come with the hinges, secure the hinges to the jamb. Make sure the hinges are secure and level before proceeding.
4. Finally, you need to attach the door to the hinges. Place the door against the jamb, and make sure it’s aligned with the hinges. Then, use a screwdriver and the screws that come with the hinges to secure the door.
You should also make sure the door is level before tightening the screws. Once you’ve secured the door, you’re ready to install the knob set, trim, and other accessories.
How do you adjust soft close cabinet hinges that won’t close?
If your soft close cabinet hinges won’t close properly, there are several things you can try to adjust them. First, ensure that all of the hinges are in the correct position and tightly secured to the frame and cabinet doors.
Then, try adjusting the tension on the hinges. This can often be done by tightening or loosening the screws located on the hinge. You may be able to find these screws on the ends or sides of the hinge.
If the tension adjustment doesn’t work, you should check the alignment of the door and the cabinet hole or holes that the hinge attaches to. You may need to loosen or tighten the holes slightly in order to properly align the door.
If further adjustment is needed, try gently tapping the hole or hinge with a hammer to loosen or tighten it. Lastly, if the hinge is too tight, slightly sand the area around the hinge to reduce friction and give the door more room to close more smoothly.
Why is my soft close hinge not working?
Your soft close hinge not working may be due to a few different possible causes. Firstly, it is important to ensure that the hinge has been correctly fitted as this could be the cause of your issue. Additionally, the hinge could have worn down internally, meaning the soft close mechanism no longer works as effectively as it should.
Finally, debris may be blocking the hinge, preventing it from smoothly closing. To fix this, you should try removing and cleaning the hinge by using a dry cloth to wipe away any dirt or dust. If this does not work, then it is possible that the hinge needs to be replaced in order to restore it to full working order.
Are Franklin Brass and liberty the same company?
No, Franklin Brass and Liberty are not the same company. Franklin Brass is a consumer products brand owned and operated by the Brainerd Manufacturing Company, which is headquartered in Indiana. It was founded in 1975 and offers products such as cabinet hardware, switch plates, bathroom accessories and more.
Liberty is a brand owned by the Master Lock Company, which is based in Illinois. Liberty offers a variety of home decor products such as knobs, pulls, hooks and decorative wall plates. Liberty also provides cabinet locks, door locks and security products.
Both companies provide products that enhance homes and businesses and offer a wide variety of quality and stylish products.
Is Brainerd hardware good quality?
Brainerd hardware products have consistently been known for their lasting quality. The brand has a reputation for using high-grade materials that stand the test of time, while designs are often both stylish and timeless.
In addition, much of the hardware is backed by a lifetime warranty, so you can be confident in knowing that you will receive a product made of premium materials. With Brainerd hardware, you can trust that you’re getting a product built to last, making it a great choice for homeowners looking to invest in durable hardware for their homes.
Where is liberty cabinet hardware made?
Liberty Cabinet Hardware is made in a variety of locations around the world. Their brass and zinc die-cast products are produced in either China or Taiwan and then shipped to their warehouse and distribution centers in North Carolina, USA.
Their innovative soft-close technologies and wood cabinet knobs and pulls are created in their Buffalo, New York facility. Liberty Cabinet Hardware is committed to providing quality parts and products to their customers all over the world, and this commitment is demonstrated in the crafted products that are produced in each of their facilities.
Is Richelieu a good brand?
Richelieu is a good brand because their products are reliable, well-made, and come in a variety of styles and finishes. They have a wide selection of cabinet hardware, including knobs and handles, drawer slides and guides, wall hooks and organizers, and many other items.
Quality is a hallmark of Richelieu products — they use strong materials and sturdy construction, so their hardware stands up to everyday use and is highly reliable. And their style offerings are vast, so you’re sure to find something that will fit your decor.
All in all, Richelieu is an excellent brand that produces excellent products.
Is Liberty Hardware a good brand?
Yes, Liberty Hardware is a good brand. Liberty Hardware has been providing high quality products for over sixty years. They have a wide selection of products ranging from door hinges, cabinet pulls, and knobs for the kitchen and bathroom, to cabinet locks and decorative hooks for a variety of home decorating needs.
They offer excellent customer service, a broad selection of products, and a wide variety of finishes to choose from. Their products have a lifetime guarantee to ensure satisfaction, even if the finish wears off.
Liberty Hardware has earned a reputation for producing quality and reliable products that are sure to last. They are also known for their innovative designs and modern products that bring a touch of style and class to any home.
In addition, their products are reasonably priced and available in both retail and online stores, making it easy to find exactly what you need for your home improvement project. So, whether you’re looking for a decorative cabinet knob or a functional door lock, Liberty Hardware is a great option you can trust.
Can you buy directly from Richelieu?
Yes, you can buy directly from Richelieu. Richelieu is a leading distributor of specialty hardware and complementary products for renovation, decoration, and design. They have an extensive selection of products available for purchase, including furniture and cabinet hardware, decorative accents, architectural and door hardware, accessories for sliding, folding, and pocket doors, and much more.
Products can be purchased directly from Richelieu’s retail and online stores. When shopping online, customers are able to browse and purchase products with their credit cards or their PayPal accounts.
Additionally, Richelieu offers their Trade Program, which enables businesses to create customized accounts and receive discounts on larger orders. With their Trade Program, businesses are able to enjoy benefits like exclusive pricing, access to new product releases, friendly customer service and more.
How do I buy Richelieu products?
To buy Richelieu products, you will first need to find an authorized Richelieu dealer in your area or online. You can search for Richelieu dealers near you by visiting the Richelieu web site and using the Dealer Locator tool.
Once you have found a Richelieu dealer, you can contact them to inquire about the product you are interested in, as well as any specific ordering conditions that apply. You can also find and purchase Richelieu products online at major retailers, such as Walmart and Home Depot, as well as other online retailers.
To order through one of these retailers, simply locate the product you are interested in, select the appropriate item number and choose the option to buy now. Finally, you can also order Richelieu products directly from the manufacturer.
To do so, visit the Richelieu web site and fill out the online ordering form or contact their customer service team to place an order over the phone.
What happened to the French battleship Richelieu?
The French battleship Richelieu was a 35,000-ton battleship, built for the French Navy in the 1930s. She was originally designed as part of a battleship pair, along with her sister Dunkerque. However, her construction was stopped during the Battle of France in 1940.
After the fall of France, Richelieu was seized by the British forces and subsequently used by the Royal Navy during the war. She was involved in the Battle of Dakar in 1940, where she engaged the Vichy French battleship Strasbourg, resulting in the sinking of Strasbourg.
She also served as the flagship for Force H during the Mediterranean campaign, providing cover for Allied landings in French North Africa.
In late 1943, Richelieu was returned to the French Navy, who then assigned her to the Far East Fleet to join the battle against the Japanese. During this period, she took part in several major operations, including raids on Sabang and the Battle of Surigao Strait.
Finally, on May 9th, 1945, Richelieu was attacked and damaged during an air raid by Japanese aircraft. Subsequently, she was scuttled off the coast of Vietnam by the French Navy. Although the battleship was damaged beyond repair, her crew was saved.
Richelieu lies at the bottom of the South China Sea until this day.
What is the use of a butterfly hinge?
A butterfly hinge is a type of hinge that is commonly used on doors, cabinets and windows. It is a surface-mounted hinge that attaches to two sides of an opening, allowing it to open or close. The butterfly shape of the hinge helps to spread the weight it is carrying across the two ends, making it stronger and easier to open.
It is usually made from heavy-duty materials such as steel or cast iron and is often sold in pairs.
The main use for a butterfly hinge is to provide a secure and reliable way to open and close an opening. This type of hinge offers an ideal solution for places that need relatively light yet strong door and window hinges.
Due to its design, it can also be used on heavy doors and windows, providing more support and stability without the need for an additional strength-bearing material.
Additionally, butterfly hinges are a favored choice because they are low profile and often come in a variety of styles that can easily match the aesthetic of the space. They are also incredibly easy to install and require minimal effort to maintain.
For these reasons, butterfly hinges are an excellent choice for many homes and businesses.
What are the 4 styles of hinge called?
The four styles of hinges are known as butt hinges, flush hinges, spring hinges, and specialty hinges. Butt hinges are by far the most common type of door hinges. They consist of two rectangular shaped plates connected by an axle or pin and they allow the door to swing in both directions.
Flush hinges are designed to lie flush with the door and door frame, which gives them a low profile. They often feature two wings that are spaced differently and projects from either side of the door frame.
Spring hinges, in contrast to butt hinges and flush hinges, contain a spring mechanism that helps to self-close doors and support heavier doors. Specialty hinges are different from the three mentioned above.
They are generally unique and more decorative, and come in a variety of types and sizes to match different kinds of doors and door openings. Specialty hinges are primarily used to create a decorative element in a home.
What are the different types of concealed hinges?
There are three main types of concealed hinges: semi-concealed, full-concealed, and invisible hinges.
Semi-concealed hinges, sometimes referred to as “half-cranked” hinges, are typically used with doors or cabinetry that require a low-profile hinge. With a semi-concealed hinge, two arms of the hinge can be seen on either side of the door.
The major benefit of these types of hinges is that they can be used with a variety of applications and are relatively easy to install.
Full-concealed hinges, sometimes referred to as “hidden hinges”, are designed to be set in the doorframe when installed. This type of hinge is installed horizontally and is typically not visible from the outside of the door when closed.
Full-concealed hinges offer a nearly invisible mounting option that is a great option for flush-mount doors, as well as for applications where a decorative element is desired.
Invisible hinges, sometimes called “concealed pivot hinges”, are designed to pivot around a single point, allowing the door to swing like a traditional hinged door. Unlike full-concealed hinges, invisible hinges have a visible hinge pin that is visible when the door is closed.
This type of concealed hinge can be used to create a concealed pivot door with a minimal amount of space required.
Can you replace old cabinet hinges with hidden hinges?
Yes, you can replace old cabinet hinges with hidden hinges. Simply unscrew the old hinges from the cabinet door and frame, and attach the new hidden hinges in their place. Depending on the type of hidden hinge you purchase, this may require drilling pilot holes for the screws to attach the hinge to the frame.
Generally, these types of hinges are intended for use with lightweight doors, so if your cabinet door is heavier than usual, you should use heavier duty hinges. When you’ve installed all of your desired hinges, you can adjust their positions to ensure your cabinets open and close properly.
What kind of hinges do I need for a hidden door?
The type of hinges you need for a hidden door will depend on what the door is made of, how heavy it is, and the shape and size of the door. If the door is made of wood and is not overly large or heavy, you can use surface mount hinges.
These are usually sold as a pair, one for each side of the door frame. They’re easy to install since they’re only attached to the top and bottom of the door frame, and they offer an inconspicuous way to hide the door.
If the door is made of a heavier material like steel, or is large and incredibly heavy, you’ll need to use heavy duty concealed hinges. These hinges allow the door to open and close smoothly, while also being more secure than surface mount hinges.
They’re also less noticeable since they’re placed within cavities in the door and frame. Depending on the size and weight of your hidden door, you may need to use multiple heavy duty hinges to properly support the weight.
What is c1 concealed hinge?
The c1 concealed hinge is a type of door hinge that is specifically designed to be hidden from view. Unlike standard door hinges, the c1 concealed hinges are installed on the inside of a door, allowing the frame to remain uninterrupted.
This makes them perfect for applications where a sleek and streamlined look is desired with minimal hardware. The hinges are completely concealed when the door is closed and require special mounting tools to install.
Additionally, the hinges can be adjusted while they are attached to the door using the adjustment screws located on the hinge. This provides easy and precise adjustments without the need to disassemble the door.
The c1 concealed hinge is constructed with a durable steel material and is capable of providing long lasting performance.
How do I know what type of cabinet hinge I need?
To determine which type of cabinet hinge you need, you should first measure the door and the existing hinge you are replacing to get the overall measurement including the hole pattern to match the existing hinges.
If you’re installing a new set of cabinets and don’t have existing doors or hinges to work with, you’ll need to measure the opening and door size and then determine the size of the cabinet hinge that would best fit your needs.
When measuring for a cabinet hinge, you’ll need to measure the distance between the two holes in the cabinet door and the length of the hinge in order to determine the size you need. It’s important to note that if the cabinet door has recessed hinges, you’ll need to measure the distance from the edge of the cabinet door to the center of each hole as well.
Once you have the measurements you need to determine the size of cabinet hinge you need, it’s a good idea to take a trip to your local home improvement store to compare different types to ensure you have the best fit for the space.
When looking for hinges in a store, be sure to look for features such as self-closing mechanisms and non-mortise designs, which make it easier to install the hinges without having to make changes to the door or cabinet.
Once you have the correct type of cabinet hinges, they should be easy to install by following the directions that accompany the product. Be sure to use screws that are the same diameter as the hinge, too, as using screws that are too large can damage the hinges and make them unusable.