One way is to use fence ties or metal tension bands. Fence ties can be easily threaded through the chain links and tightened down with a screwdriver. Metal tension bands, on the other hand, are held in place by a tensioning tool and are generally used on heavier duty chain link applications.
Another method that can be used to connect chain link panels is by using steel cable and turnbuckles. These are typically used to connect two sections of fence that are farther apart, with the cable going through the core of the fence posts and the turnbuckles connecting to the fence ties at the top and bottom.
Lastly, if you are building a permanent installation, you can weld the panels together for a strong and secure assembly.
How do you replace a chain link fence top pole?
Replacing a chain link fence top pole is a relatively straightforward process. First, you’ll need to remove the old pole by loosening and removing the clamps that attach the pole to the posts at either end.
Be sure to save the bolts and clamps for re-use. Once the old pole has been removed, you should measure and cut the new pole to the correct length. Fit the end of the pole into the bracket on one of the posts, then install and tighten the clamps to secure it in place.
Repeat the process with the other end of the pole, tightening the clamps once the new pole is fitted in place. Finally, you’ll need to re-attach the fence wire to the top of the pole, then check the tension of the wire to make sure it’s in place.
If necessary, you can adjust the tension of the wire until the fence is in the desired position.
Does chain link fence require top rail?
Chain link fencing typically requires a top rail — this is a horizontal rail that sits atop the fence posts and can either be inserted in its own post pockets, or fastened to the individual posts with appropriate hardware.
In some cases, the top rail is not necessary, such as if the purpose of the fence is simply to enclose an area, rather than deterring climbing. In other cases, adding a top rail can offer greater stability or heightened security.
When considering a top rail, think about the purpose of the fence and the expected load it will be taking; a heavier-duty option may be necessary for a fence line along a busy roadway, for example.
Do chain link fence post need to be in concrete?
Yes, chain link fence posts should be set in concrete. Firstly, concrete is a very durable material, meaning it will stay in place much better than alternative methods. Secondly, because chain link fencing is designed to be durable enough to survive this type of installation, it’s necessary for the posts to be embedded in an adequately strong material for the fence to remain intact.
Thirdly, the concrete will help keep the post from shifting or wobbling due to wind or other natural elements that could potentially cause damage. This is beneficial for added stability, as well as for the aesthetic appeal of the fence.
Lastly, embedding the posts in concrete makes it easier for the posts to be moved, as the concrete acts as a protective barrier between the post and the ground.
How do you install a double chain link gate?
Installing a double chain link gate is a relatively straightforward process, but it is important to take all the necessary precautions when dealing with tools and materials. Here is what you need to do:
1. Start by digging a shallow trench adjacent to the opening of your double chain link gate. The trench should be dug deep enough to accommodate the gate and the post hardware.
2. Measure the distance between the posts and mark where the posts are going to be installed.
3. Install the posts into the trench and make sure they are secure. If necessary, use concrete to secure the posts.
4. Secure the gate hinges to the post. Make sure that the hinges are properly aligned, as this will ensure that the gate opens and closes properly.
5. Hang the double chain link gate from the hinges, making sure that the links are facing in the same direction on both sides of the gate.
6. Secure the gate to the post by using nuts, bolts and screws. Make sure all connections are tight.
7. Once the gate is installed, use a tension bar to adjust the tension of the gate so that it can open and close properly.
8. As a final step, check the gate to make sure everything is secure and the gate opens and closes the way it is supposed to.
By following these steps, you should have no trouble installing your double chain link gate.
Can you replace a section of chain link fence?
Yes, you can replace a section of chain link fence. The process of replacing it will depend on the size and layout of your fence as well as how it is currently secured. Generally, the process would involve cutting the damaged section with bolt cutters and then removing it.
It is important to wear protective equipment when cutting the metal, to ensure safety. After the old section is removed, the new section of part can be fitted in its place. Having the old post and fittings on hand is beneficial for proper positioning of the new section.
You can then secure the new section securely with the necessary hardware and connecting pieces. To protect the metal from corrosion, you can apply a galvanised protective coating before installing. Once the fencing is secured, you are done.
How do you measure a top rail chain link?
To accurately measure a top rail chain link fence, you will need to measure the entire length of the rail that encloses the top of the fence. To do this, you will need an accurate measuring tape. Begin by placing the measuring tape at the beginning of the top rail, and make sure that it is taut and lined up along the rail.
Make sure to measure the entire length of the rail, including any bends or changes in direction. Once you have the full length of the top rail, record the measurement and then move onto the next section if necessary.
It is important to measure each rail precisely to ensure a proper fit and installation when the fencing is complete.
How is chain link rail measured?
Chain link rail is measured by counting the number of fence line posts plus one, then measuring the distance between each post. The total linear footage of the chain link rail is then determined by adding up the distances between each post.
Typically, a chain link fence will include a top rail, which is the main visible line of the fence when viewing from the outside. Additional rails or “truss” wires are often added for extra height or strength.
Each rail should be measured separately, counting the posts and measuring the linear footage of each. Generally, the posts should be no more than 10 feet apart, and the length of the fabric should be at least two feet more than the total distance of the posts to ensure that it is properly secured while keeping it taut.
It is important to measure accurately, as this will ensure that the chain link fence installation is successful.
How long are chain link top rails?
Chain link top rails typically come in a range of sizes, including 6 foot, 9 foot, and 12 foot lengths. When deciding what size top rail will best suit your needs, you will need to measure the distance between the posts and then select the rail that will fit that distance.
If you are using a 5 foot high chain link fence, then a 9 foot top rail will typically work best since it will give you an extra 4 foot of support on each side. If a taller fence is needed, then a 12 foot top rail will likely be the best choice.
It is important to keep in mind that these are only general guidelines, and you may need to make slight adjustments depending on your specific setup.
What size are chain link fence poles?
The size of a chain link fence pole varies depending on the specific type and size of fence being installed. Generally, the standard poles for a residential chain link fence are made from 1 3/8 inches to 2 3/8 inches in diameter.
Anchor posts, which are used to anchor the fence sections to the ground and provide added strength, are made from 2 3/8 inches to 4 inches in diameter. Additionally, posts used for corner, gate, and end sections of the fence are typically larger in diameter than the line posts that are used for the rest of the fence.
The specific diameter of the poles will also be based on the size of the mesh. For example, a 2 inch mesh will typically use a 1 5/8 inch diameter pole and a 2 1/4 inch mesh will use a 2 3/8 inch diameter post.
It is important to choose the correct size pole to ensure the stability and security of the fence.
What diameter are fence posts?
The diameter of fence posts varies depending on the type and size of fence being installed. For example, a 4 foot tall fence might require 4×4 inch diameter posts, meaning the posts are 4 inches by 4 inches.
A taller fence, such as an 8 foot tall fence, might require 6×6 posts, meaning the posts are 6 inches by 6 inches. In general, a taller fence will require posts with a larger diameter. It’s important to refer to local codes and specific fence or gate manufacturer recommendations to determine the size and shape requirements of your fence posts.
What size pipe is used for fencing?
The size of pipe used for fencing will depend on the application and desired use of the fence. Generally, a common size of pipe used for residential fencing is a 1.5 inch outer diameter galvanized steel pipe with a 16 gauge wall thickness.
This size of pipe is lightweight, strong, and often preferred for its cost-effectiveness compared to thicker or heavier pipes. In applications where high security and strength are required, larger pipes are typically used such as 2.375 or 2.
5 outer diameter steel pipes with either a 14 or 12 gauge wall thickness. Additionally, the pipe material may vary depending on the specific application and desired performance, with different types of metals or plastic commonly used.
Do you need a bottom rail for chain link fence?
Yes, a bottom rail is generally necessary for a chain link fence. The purpose of the bottom rail is to provide stability along the bottom of the fence and keep it secure. By adding this rail along the bottom, it will ensure that the mesh fencing stays in place and cannot be easily pushed up or kicked out.
A bottom rail will also prevent the fencing from being damaged by lawn mowers and other objects that may run along the bottom of the fence. Additionally, without a bottom rail the chain link fence may be subject to damage from pets or other animals pushing against it.
It can also add an extra layer of privacy by preventing people from seeing under the fence.
How deep should a fence post be?
The depth at which a fence post should be installed depends on the type and size of the post. Generally speaking, it is recommended to bury wood posts at least two-thirds of their aboveground height.
For example, if the total aboveground post height is 8 feet, you should bury the post at least 5 feet deep. Steel posts, which are heavier and more durable, should be buried at least 33% of their aboveground height.
When determining post depth, consider both the soil type and expected frost line in the area. In most cases, setting posts at the local frost line (the maximum depth of a frozen soil) will provide adequate stability.
For sandy soils, posts may need to be buried one foot deeper than the frost line for additional stability. Similarly, for clay or heavy soils, you may need to bury the post a foot shallower than the frost line.
The frost line can vary from 12 to 36 inches deep depending on the region.
Finally, keep in mind that a fence post should not be flush with the soil because this can lead to rotting and/or underwatering. Fence posts should remain slightly higher than the floor grade of the soil.
All in all, the depth of a fence post can vary slightly based on the materials used, soil type, and expected frost line.
What is a terminal post for chain link?
A terminal post for chain link is a post (or posts) at the very end of the perimeter of the chain link fence. These posts have a different construction compared to the line posts as they are used to affix the end of the chain link fabric or to finish off the installation.
They are installed by setting them in concrete and attaching the top (or bottom) rail and the fabric. Terminal posts come in a variety of heights and are equipped with clamps to securely attach the fabric to the post.
They may be swaged (or tensioned) onto the fabric for increased stability. They may also have additional elements such as post caps, extension bars, fascia plates, and post anchors. Depending on the purpose, terminal posts may be galvanized, powder coated, or vinyl coated to prevent corrosion and ensure a longer lifespan.