The Shark Navigator DLX is a powerful and versatile vacuum that requires proper maintenance and periodic deep cleaning to ensure it remains in good working order. To effectively deep clean your Shark Navigator DLX, follow these steps:
1. Start by emptying the dust bin and checking for any debris that may have become lodged in the dust bin filter. If any debris is present, use a washing machine to clean the filter.
2. Carefully detach the dust-compartment from the vacuum and use a soft brush to scrape off any dirt or debris from the walls and the floor of the compartment. Vacuum any remaining debris from the compartment using the Shark Navigator DLX.
3. Once the dust compartment has been cleaned, check the filter for dirt or debris and if necessary, replace with a new filter.
4. Next, clean out the hose and its attachments using a canister of compressed air.
5. Finally, inspect the roller brush for hair and lint, and use a pair of scissors to trim any embedded items.
After completing the above steps, your Shark Navigator DLX should be thoroughly cleaned, hygienic and ready to use again. For ongoing maintenance, it’s recommended to empty the dust bin regularly and wash the filter at least once every month.
Does the Shark Navigator DLX have a HEPA filter?
Yes, the Shark Navigator DLX does have a HEPA filter. This vacuum is equipped with a lifetime filter that captures and traps 99.9% of dust and allergens as small as 0.3 microns. It also comes with a dust cup, crevice tool, and pet multi-tool, making it the perfect vacuum for a home with pets.
The filter is easily accessed and cleaned, so maintenance is minimal. This vacuum also is equipped with Swivel Steering and Advanced Cyclonic Technology which make it easy to maneuver around tight space and furniture.
The Shark Navigator DLX is ideal for those who have allergens and pets in their home, as it can capture even the smallest of particles and provide you with long-lasting, powerful cleaning.
Are Shark HEPA filters washable?
Yes, Shark HEPA filters are washable. They have a washable design and can be used many times. However, there is a limit to how many times a filter can be washed before it needs to be replaced. The best way to clean a Shark HEPA filter is to remove it from the vacuum, then rinse it off in warm water and let it air dry.
Do not use soap or put it in the dishwasher. After drying, the filter should be inspected and any damage should be noted. If the filter is heavily soiled or damaged, it should be replaced.
Where is the Shark HEPA filter?
The Shark HEPA filter is typically located at the front or back of the vacuum, depending on the exact model you have. Generally, the filter will be positioned near the motor. You may need to remove side panels or the dust canister to access the filter.
If you are having difficulty locating the filter, consult your vacuum’s manual for specific directions for your particular model. It may also be helpful to consult an online user guide, as many of these filter locations may also be easily found in diagrams.
When should I replace my Shark Navigator HEPA filter?
Your Shark Navigator HEPA filter should be replaced when the filter starts to look dirty or clogged with dust. To tell if your filter needs replacing, you can check the indicator light on your vacuum.
If it is blinking or is red, then your filter needs to be changed. Usually, manufacturers recommend replacing your filter every 3 to 6 months depending on how frequently you use your vacuum. If you clean often and use your vacuum for long periods of time, then you may need to replace your filter more regularly.
It’s also important to clean your filter at least every other month, to ensure that it is working properly and to improve vacuum performance.
How do I clean my Shark Navigator Lift Away filter?
To clean your Shark Navigator Lift Away filter, you will need to follow four basic steps.
1. To begin, remove the filter from your vacuum. Turn your vacuum off and disconnect it from the electrical outlet if you haven’t done so already. Unscrew the filter cap and carefully lift the filter out, making sure to keep it upright to avoid spilling any dirt or dust.
2. Next, separate the filter and the foam filter. The foam filter is the part that filters dust and dirt, while the filter is the part that captures dust and air particles.
3. Once these two parts are separated, you can easily remove the dirt and dust from the filter and foam. Take the filter parts to a sink and use warm water and a mild detergent to wash them. Gently massage the filter and foam with a soft brush to loosen any stubborn particles.
4. Finally, after the filter and foam are properly washed and dried, return them to the vacuum cleaner. Secure the filter and foam back in place and then screw the filter cap on tightly. Your Shark Navigator Lift Away filter is now clean and ready for use.
Why is my Shark Navigator losing suction?
Your Shark Navigator could be losing suction for a number of reasons. It’s important to first identify the source of the problem before troubleshooting. First, check if the dust cup is full. If it is full, empty it to maintain optimal suction power.
Check to make sure the dust cup is properly sealed and the filter is properly installed. Additionally, check whether the brushroll, belt, or beater bar is clogged with hair, lint, and debris. If it is, clean out the dirt and debris to improve suction power.
You can also clean out the hose and vacuum port with a brush to prevent clogs. Finally, ensure that all of your vacuum’s parts are functioning correctly. If not, replace any broken parts. Lastly, check your owner’s manual for further instructions on how to properly maintain and clean your vacuum.
Where is the HEPA filter on Shark lift away?
The HEPA filter on Shark Lift Away vacuums is located in the debris chamber that is attached near the dust cup of the vacuum. To access the filter, remove the dust cup and gently pull the chamber away from the vacuum.
The HEPA filter should then be visible towards the bottom of the chamber and can be removed by gently pulling it off. It’s important to note that when cleaning or replacing the HEPA filter, you should avoid using water or any other liquid, as this could damage the filter or the vacuum itself.
How often should Shark HEPA filter be replaced?
Generally, Shark HEPA filters should be replaced every 3 to 6 months for full-sized Shark vacuums, and every 6 months for the smaller size. However, it can vary depending on the specific usage and type of vacuum.
If the vacuum is used frequently, on a daily basis and with a high workload, the filters may need to be replaced more often. Additionally, if the filter has visible dirt, dust, and debris, this can also indicate that it will need to be replaced soon.
Overall, in order to maintain maximum performance and suction power, it is important to regularly check the filter and replace it as needed.
Can I clean shark air purifier filter?
Yes, your shark air purifier filter can be cleaned. It is important to clean your air purifier filter regularly to make sure it’s working effectively and efficiently. Making sure to follow the manufacturer’s instructions, your first step should be to check the filter type, as some may require replacement instead of cleaning.
Depending on the type, you should use a damp cloth or vacuum cleaner with a hose attachment and soft-brush nozzle to clean the filter. Additionally, you should not use any harsh chemicals, detergents, or soaps as these can damage the filter and reduce its effectiveness.
When cleaning is complete, make sure to allow the filter enough time to dry before placing it back into your air purifier. This will ensure it is working properly and, ultimately, improve the air quality in your home or office.