If your Oculus Go controller isn’t working as expected, there are a few troubleshooting steps you can take to try and fix it.
First, try restarting the Oculus Go headset:
1. With the headset still on your head, press and hold the-power button on the side of the headset until you hear a beep.
2. Release the power button.
3. Once the restart is complete, open the Oculus app on your phone, go to “Settings,” and make sure the controller is still connected.
If the controller is still not working, you will need to re-pair it with the headset:
1. Ensure that the Oculus Go is turned on, and that your phone’s Bluetooth is enabled.
2. In the Oculus app, select “Settings” -> ”Controller” -> “Pair Controller.”
3. Find the controller on your phone’s Bluetooth scan and select it to pair.
4. Once paired, your controller should be working again.
If the controller continues to not work, you may need to consider replacing the controller or contacting Oculus Support for further help.
How do I reset my Oculus controller that won’t connect?
If your Oculus controller won’t connect, you can reset it by following these steps:
1. Turn on your Oculus headset and launch the Oculus app on your PC.
2. Open the Settings menu and select Devices.
3. Select Configure Rift.
4. Select the Controllers selection.
5. Select the Reset or Reposition option.
6. Follow the on-screen instructions to reposition and reset your controller.
7. Once the reposition or reset is complete, the controller should reconnect to your Oculus headset.
8. If the controller still won’t connect, try restarting your PC and Oculus headset before repeating steps 1-6.
Why is my Oculus Go not working?
It’s difficult to offer a definitive answer without additional information about the nature of the problem or your setup, but some common causes for Oculus Go not working include the following:
1. Hardware Issues. If you haven’t used your Oculus Go in a while and the headset appears to be unresponsive, it could be due to hardware issues. Check the headset’s cable connections to make sure they’re properly secure, and try resetting the device.
2. Software Issues. It’s also possible that there are software updates that need to be installed on the Oculus Go. Try going to the Oculus Support website and check for available software updates and follow the instructions to complete the installation.
3. Internet Connection. Poor network connections can lead to loading issues, lagging, and general disruptions. Check that your device is connected to a secure and stable Wi-Fi network and try restarting your router and internet connection.
If none of the above solutions fix the issue, contact Oculus Support for further assistance. They should be able to provide more specific advice on how to get your Oculus Go working again.
What controllers will work with Oculus Go?
Oculus Go works with three types of controllers: the Oculus Go Controller, Xbox Controller and, if you’re using the optional headset adapter, the Oculus Rift controllers.
The Oculus Go Controller, which comes with the headset, looks similar to a remote control and works with most VR experiences on the Oculus Go headset. It has a trigger button and a touchpad that track the position of your finger or thumb and allow basic control of the headset and apps.
The Xbox Controller is a great option if you’re looking for a more robust controller with traditional gaming controls. It features a standard four-button layout and two analog sticks, as well as a directional pad and trigger buttons.
The Xbox Controller also connects to the Oculus Go headset via Bluetooth.
If you’re using the optional Oculus Go Headset Adapter and have an Oculus Rift, you can use the Oculus Rift Touch controllers to play games on your Oculus Go. These touch controllers feel more natural and immersive compared to the other controllers, and will definitely provide a more realistic gaming experience.
Does Oculus Go still work?
Yes, Oculus Go still works. Released in 2018, the Oculus Go is a standalone virtual reality headset with 3DOF tracking technology, which tracks rotational movement of your head. It features a comfortable design, a high-resolution fast-switch LCD display, and integrated spatial audio.
With up to 64GB of internal storage, you can use it to download and install over a thousand apps, games, and experiences. Furthermore, with its compatibility with the Oculus Mobile SDK, developers can quickly and easily create new content for the Oculus Go.
Additionally, it comes with a hand-held remote control and two built-in motion controllers that support additional use cases. As of 2021, the Oculus Go remains a viable and popular choice for immersive VR experiences.
Does Oculus Go have Bluetooth?
Yes, the Oculus Go does come with Bluetooth. It is Bluetooth 4.1 with support for LE wireless headsets. The Oculus Go has been designed to be completely cable-free, so the Bluetooth connection is used to enable wireless headsets for audio.
It also has an integrated audio adapter for headphones, should you prefer to use cables. The Oculus Go also supports NFC, which can be used to quickly pair the headset with supported phones.
Will Oculus Go work with gear VR controller?
No, Oculus Go does not work with Gear VR controller. Although both headsets are from the same manufacturer, Oculus, they are different models and each has its own controller. Gear VR headset uses a handheld controller while Oculus Go headset uses a built-in controller that is connected directly to the headset.
Oculus Go headset also uses a different tracking system than Gear VR in order to monitor user movements.
How do I reconnect my Oculus disconnected controller?
If your Oculus controller becomes disconnected during use, the first step is to check your battery. If the battery is low, empty, or dead, use a USB cord to charge the controller before attempting to reconnect it.
Next, select the controller you are attempting to reconnect within the Oculus app. To do this, open your Oculus app and click the “Devices” tab in the sidebar. Then, select the controller you wish to reconnect and tap the “Reconnect” option.
Finally, ensure that the controller is properly paired with your Oculus headset. To do this, put the headset on and make sure it is turned on. The controller should appear in your headset’s view, and the app may prompt you to click the small circular button located at the top of the controller.
If this is the case, press and hold the button until the controller is connected and your Oculus App displays “Controller Connected”.
Once the controller is properly paired and connected to your headset, you should be able to use your Oculus system normally.
Can I set up Quest 2 without controllers?
No, you cannot set up Quest 2 without controllers. The Oculus Quest 2 is designed to work with Oculus Touch controllers. The Quest 2 comes with a pair of these controllers, so you will need them to set up and use the headset.
The Oculus Touch controllers allow you to control the headset and navigate through menus and VR applications. Without them, you won’t be able to use the Quest 2 properly.
Can you control Oculus from phone?
Yes, you can control Oculus from your phone. The Oculus mobile app can be downloaded from the Apple App Store or the Google Play Store. Once installed, the app allows you to browse through the Oculus content library, purchase items, and customize your Oculus settings.
You can also control your Oculus experience while in VR. For example, you can adjust your Guardian boundary, cast your Oculus Home or apps to another device, and access other settings such as accessibility options.
You can also view and manage your Oculus account information and access Oculus support within the app.
How do I factory reset my Oculus 2?
To factory reset your Oculus 2, please follow the steps below:
1. Start by powering off the Oculus headset.
2. Connect the headset to your computer—or a wall outlet if you’re using the
Oculus Link cable—using the included USB-C cable.
3. Press and hold down the power and volume buttons on your headset at the same time
for 10 seconds or until the reset process begins.
4. When the reset process is complete, your headset will power off.
5. Now disconnect your headset from the USB-C cable, you can now turn it back on and you
will be prompted with a setup tutorial that will take you through re-configuring your
headset.
6. Once complete, the headset will now be reset to factory settings.
How long does the Oculus Go last?
The Oculus Go has a battery life that can last up to 2.5 hours depending on the type of activities you are performing, such as playing virtual reality games or streaming videos. When using the Oculus Go for basic activities such as app navigation and general use, it can get up to 3.
5 hours of battery life. If you power down the Oculus Go completely when not in use, the battery can last up to 2 weeks. In addition, the device powers down after long inactivity to further extend its battery life.
Why does my Oculus Go have a black screen?
The most likely cause is that the headset is not set up properly. To check if this is the issue, make sure you have followed the instructions for properly setting up the Oculus Go headset.
Additionally, it is possible that the screens in the headset are malfunctioning. If this is the case, you should consider reaching out to Oculus customer service. They may have additional information on resolving the issue.
Finally, there could be an issue with the power supply. Try connecting the headset to the charger and see if the black screen persists. If it does, the issue may be caused by a defective power cable or adapter, a damaged power jack, or a malfunctioning charging port.
In these cases, you may need to get a new cable, adapter, or charging port.
Why is my VR light purple?
The most common reason why your VR light may be purple is because your device needs to be restarted. Restarting the device can help reset the hardware and software components, allowing it to effectively re-calibrate and operate correctly.
Depending on the device, you may need to power it down completely and unplug it, or reset by holding down the power button.
Other reasons why your VR light may be purple could be due to technical issues caused by problems with the hardware, software, or circuitry. If the issue persists after restarting the device, it’s best to contact the manufacturer for assistance.
They may be able to identify the issue and offer a resolution.
Why is Oculus turning on and off?
Oculus turning on and off could be caused by many things, including a faulty power supply, broken or loose cables, or software and driver issues. If the Oculus is often turning on and off suddenly, it is important to troubleshoot for a potential issue.
First, make sure the power cable is securely plugged in, both in the Oculus and the wall outlet. Ensure the HDMI and USB cables are securely plugged into both the computer or console and the Oculus headset as well.
Unplug and replug these cables if necessary. If the problem persists, reboot your computer, console, and/or router to ensure all operating software is running optimally.
If the issue persists and the Oculus is turning off and on continuously, avoid using the headset until the issue can be identified and resolved. Take a straightforward look at the hardware components, cable connections, and power supplies to make sure they are all functioning properly.
If you are unable to identify the source of the problem, contact Oculus customer support to troubleshoot the issue further.
Does Oculus have warranty?
Yes, Oculus does have a warranty for their products. All of their Oculus headsets and devices come with a limited one-year warranty, which covers all defects in the materials or workmanship of the product, and some accidental damage.
The warranty includes free parts and labor, but not shipping. If you have an additional warranty, it may extend the period of coverage and/or provide other additional benefits. It is best to refer to Oculus’s warranty page for further details.