Hanging a curtain valance is a simple and elegant way to update the look of a window and fill it out with a decorative, tailored top treatment. Here are the steps to follow for a successful installation:
1. Measure your window width and add 3 to 4 inches to each side of your window, then purchase the necessary length of your curtain valance.
2. Find the center point of the curtain valance and mark it with a pen, making sure that it will be centered above the window.
3. Install the curtain rod according to the instructions that come with it, typically 3 to 4 inches above the window frame.
4. Fit the curtain valance onto the rod and use drapery pins or clips to secure it in the center.
5. Tighten each side of the valance by using drapery pins or wall hooks.
6. Make sure the valance hangs evenly along each side. You might need to adjust it until you’re satisfied with the way it looks.
7. Hang the corresponding curtains and tie them into the valance with tiebacks or a ribbon, if desired.
8. Once you’ve adjusted the curtains and drape, you can enjoy your newly updated window.
How far apart should valance be from curtain?
When hanging curtains on a curtain rod, it is generally recommended to leave a space of 4 to 7 inches between the curtain and the valance. This will ensure that the valance does not overweigh the curtain and that both look proportionate and balanced once hung.
However, this measurement may vary depending on the size of the window, the length of the drapery panels, and the type of valance you are using. If you are using a shorter or tailored valance, you may opt to hang it closer to the curtains (about 2-3 inches).
Longer or fuller valances may look best when they hang a bit lower, around 4-5 inches apart from the drapes. Ultimately, it is all up to your personal preference.
How long should a valance be for a 72 inch window?
For a 72-inch window, a valance should be at least 15 inches in length, however, to achieve a polished look and festive flare, a valance length of 25 to 30 inches is ideal. The length of the valance should be at least one third of the overall window width, which for a 72-inch window should be 24 inches.
If the window is in a high traffic area, you may want to go for a longer valance for a more dramatic look and feel. Additionally, fabric weight will also play a role in the overall look of the valance.
Typically, for a more tailored, finished look, heavier fabrics with a bit of fullness due to pleats or stitches should be used.
How long is the average valance?
The average valance typically measures approximately 15 inches in length. The height, or “drop,” can vary depending on the specifications given, but generally the drop is between 12 and 18 inches. For a traditional valance that hangs on rod pocket holders, the drop can be tailored to fit any window size, while a tailored or tab top style will have a pre-determined length and width.
The length of a valance can also be adjusted by layering one or more fabrics of varying lengths, or by adding pleats, buttons, or ruffles for more added detail.
How big should a valance be?
The size of a valance can depend on a few different factors, such as the size and style of the window, the size of the room, the effect you are trying to achieve, and more. Generally, a valance should completely cover the top portion of the window, but should not extend any lower than 4-5 inches over the frame.
This ensures that the window opening is still visible and the light can still enter the room. If you are trying to achieve a layered look with a valance, then several inches of overlap would be needed.
It is also important to consider how the valance will fit with the overall look of the room and window. For example, if you have narrow windows, a long and wide valance would be too overwhelming. Additionally, if the length of the window is short, then a valance that is too long can make the window look disproportionate.
As a general guideline, the length of the valance should be 1.5 times the width of the window for the best overall look.
How much fabric is needed for a valance?
The amount of fabric needed to make a valance will depend on several factors, such as the size of the window, the valance’s style, and the desired fullness. As a general rule of thumb, you should plan to purchase enough fabric to cover five times the width of the window.
For a more tailored valance, you should purchase enough material to cover seven times the width of the window. Additionally, you may need to buy more fabric to accommodate additional design details, such as pleats, hems, and trims.
It’s also important to factor in the fullness of the valance when determining how much fabric you’ll need. Typically, most valances are made with a fullness of 1.5 to 2.5 times the window width. For example, if the window is one yard wide, you’ll need 1.5 – 2.
5 yards of fabric for the valance.
Overall, calculating the amount of fabric needed for a valance takes a bit of trial and error. For best results, it’s important to take accurate measurements of the window, know the desired style of the valance, and plan for additional elements like hems and pleats.
If in any doubt, it’s always best to buy a bit extra just in case.
How are valance returns calculated?
Valance returns are calculated by comparing the market value of an asset to the current cost of the asset. If the market value is higher than the cost, the investor has gained a positive return. This capital gain can be calculated using the following formula: Valance Return = (Current Market Value – Cost of Investment) ÷ Cost of Investment.
For example, if an investor purchased a stock for $10 and it is now worth $15, the Valance return would be (15 – 10) ÷ 10 = 0.5, or a 50% return on investment. Valance returns can also be calculated over a period of time, and may include other types of investments such as bonds, mutual funds, derivatives and real estate.
To calculate Valance return over a period of time, the formula is: Valance Return = (Ending Value-Beginning Value) ÷ Beginning Value. This formula can be applied to any type of investment to see how much value it has gained over a period of time.
Can you use a valance with curtains?
Yes, you can use a valance with curtains. Valances are a decorative addition to curtains that add a formal and stylish look to a window treatment. They usually hang a few inches above the top of the window and are usually made of light fabric, allowing for the curtains to still be the main focus.
Valances come in a variety of styles, patterns, and textures so you can pick a set of curtains to fit with the valance of your choice. Valances can also act as a place to hang tiebacks and decorations and are a great way to bring a bit of character to your window.
Can you hang valance and curtain on same rod?
Yes, you can hang valance and curtain on the same rod. Having two pieces on the same rod gives the window a complete and more polished look, as the two pieces work together to block light and provide extra privacy.
To hang the valance and curtain together, simply slide the curtain onto the rod and then place the valance above it. Make sure the fabric of the curtain and the valance are similar in color, texture, and pattern, as this will give the room a cohesive look.
Do you need a double curtain rod for a valance?
A double curtain rod can be used to hang a valance, but it is usually not necessary. A single curtain rod with rings is often sufficient for hanging a valance alone. However, if you want to hang a sheer panel behind the valance for a layer effect, then a double curtain rod for two layers of curtains is recommended.
It will help separate the two fabrics and create a more finished look. Additionally, some fabrics with fullness may be heavy for one curtain rod and using two could distribute the weight more evenly.
If you are using a double curtain rod for a valance, it is important to select curtain rods of similar size and style. This will allow both layers of curtains to hang evenly and create a cohesive look.
Where should valance rods be placed?
Valance rods should be placed approximately 2-3 inches above the top of the window trim. This will help to create a finished look for the window, as the valance will be slightly elevated rather than resting directly on the trim.
To measure the correct height above the window, mark a point 2 inches above the top of the trim and place the hooks 2-3 inches above this point. The rod should rest right at that mark. Make sure that you secure the rod brackets into the wall securely before placing the rod on them, as the weight of the valance can be considerable.
What kind of rod do you use for a valance?
The type of rod you use for a valance depends on the material and style of your valance. A traditional style valance typically requires a metal rod, as a metal rod is strong enough to hold the weight of the fabric and will not sag over time.
If you have a light-weight fabric or a more contemporary style valance, you can opt for a wooden rod, which will provide a more decorative touch. When selecting a rod for your valance, you may need to consider several factors such as the size of the window, the size of the valance, the style of the room, and your budget.
Ultimately, the best rod for your valance will depend on the design and materials you choose.
What is a double curtain rod called?
A double curtain rod is commonly referred to as a double traverse rod or a double rod. It is a combination of two curtain rods that are connected together with one adjustable center bracket allowing two sets of drapery to be hung from one window in a single installation.
Double traverse rods typically come with adjustable rod widths so you can customize your window treatment to fit the exact width of your window. This type of window treatment is especially common for larger windows, as it gives you a stylish way to hang two different sets of drapes or curtains.
The double rod installation also allows you to hang heavier curtains in one window treatment, as the balanced support provided by the double rod is stronger than a single curtain rod.
What should the height of the valance be?
The height of the valance should be based on the size and style of the window, as well as the type of valance you plan to hang and the room’s décor. For example, a popular choice is the café valance style, which hangs approximately one-third to one-half the window’s height and is suited for smaller windows.
The swag style valance is longer than the café style and typically looks best when the height of the valance is approximately two-thirds the height of the window. The ascot style valance is slightly longer than the swag style, making it a good choice for larger windows.
The height of this type of valance should be approximately three-fourths the window’s height. Additionally, if the windows are used for other purposes, such as in a kitchen, you may want to hang the valance slightly higher than those guidelines so it does not interfere with the function of the window.
Ultimately, you should consider what looks best for your window and the décor of your space.