If you are looking to hide a surge protector, the best way to do this is to use a floor cord cover. This is a raceway that is designed to conceal cords, cables, and wires along the floor. It is usually made of plastic, vinyl, or metal and can be painted to match the wall or floor color.
It can easily accommodate large surge protectors and a variety of cables, helping to keep your space looking neat and organized. To install this, you will need to measure the length of the cords you need to hide, cut the floor cord cover to size and lay it out, running it along the floor to the outlet.
It’s important to make sure it isn’t so tight as to cause strain on the cords, or so loose that it can be a tripping hazard. Once in place, you can then plug in the surge protector and plug the other cords into to it.
This can help to keep your electronics, wiring, and cords protected from damage due to power surges, while also keeping your living space looking nicer.
Can a surge protector go in a drawer?
Yes, a surge protector can go in a drawer, though it is not the recommended method of storing it. Much of the efficacy of a surge protector depends on air movement, particularly when it has been used, and placing it in a drawer would block the air circulation.
Even with the draw open, the electronics in the surge protector will still be exposed to more heat than is ideal, which could reduce its life expectancy. Surge protectors come in many shapes and sizes and it’s important to find one that fits with the size of your draw space.
Opting for a smaller surge protector, if needed, is often recommended, as it will provide the optimal air movement. Additionally, place the surge protector away from other items, so as to ensure adequate airflow and keep the temperature around it at a low level.
Can you cover a power strip with a blanket?
No, it is not recommended to cover a power strip with a blanket. Doing so could create a fire hazard as the blanket will block ventilation, causing the power strip to overheat. Furthermore, it could prevent the power strip circuit breaker from tripping if it overheats, further increasing the risk of an electrical fire starting.
Additionally, you may cause an electrocution risk if you or someone else touches the blanket and an exposed wire at the same time. For these reasons, it is not recommended to cover a power strip with a blanket.
Do surge protectors need ventilation?
Surge protectors do not necessarily need ventilation. However, like any electronic device, heat management is important. A surge protector can generate long-term heat, which can eventually cause the device to short circuit.
Therefore, leaving room in a surge protector setup or installation to allow proper ventilation can help keep the device safe and operational for a longer period of time. Ideally, the surge protector should be set up in an area that has plenty of airflow and ventilation.
This will help ensure the surge protector doesn’t get too warm and increase its chances of lasting longer. Additionally, it’s important to check the specifications of any surge protector to make sure that it’s rated for the voltage requirements and capacity needs of your setup.
What should you never plug into a surge protector?
It is important to understand that surge protectors are not intended to, and should never be used to, protect all types of electronic equipment. Surge protectors are designed to only protect devices that are sensitive to sudden increases in power, such as computers and home entertainment systems with multiple components.
Therefore, it is important to never plug the following items into a surge protector:
1. Appliances: Appliances, such as refrigerators, washers and dryers, should never be plugged into a surge protector, as they may draw too much power and overwhelm the protector.
2. Power tools: Power tools, such as circular saws or drills, should never be plugged into a surge protector due to the large amounts of power they can draw.
3. Space heaters: Space heaters consume too much power to be protected by surge protectors, and should be plugged directly into a wall outlet.
4. Motorized equipment: Motorized equipment, such as electric lawn mowers or pool pumps, should never be plugged into a surge protector due to the potentially high power loads they can draw.
Can a power surge damage a furnace?
Yes, a power surge can damage a furnace. A power surge can carry excessive voltage, which can overload the furnace’s circuits and cause an electrical short. This can lead to sparks and melting, damaging the components of the furnace.
If your furnace has been affected by a power surge, it is important to have an HVAC specialist inspect it to determine the extent of the damage and the necessary repairs. The specialist may replace faulty components, such as wiring, capacitors, relays, and contactors, and may even replace the entire furnace.
It is important to have the furnace repaired right away, or else it could become a fire hazard or completely shut down.
Is it worth getting a whole house surge protector?
Yes, it is definitely worth investing in a whole house surge protector. These systems are designed to protect your entire home from power surges, providing you with invaluable peace of mind. A whole house surge protector is installed at the breaker panel, which is where all the electricity comes into your house.
This will then monitor any potential surges of electricity and divert it before it reaches any of your electronics, appliances, and other electrical components within your home.
Whole house surge protectors come in different varieties and are able to offer varying levels of protection. For example, basic protection is able to protect your entire house from a direct lightning strike, while upgraded models will protect against multiple strikes, as well as high surges caused by things such as downed power lines.
Additionally, investing in a whole house surge protector can offer various other benefits, such as extending the life of your electrical components. This will in turn save you money in the long run, as you won’t have to purchase replacements so often.
Overall, getting a whole house surge protector is definitely worth the investment. These protectors provide valuable peace of mind, as well as a whole host of other benefits, making it a wise choice for anyone who wants to ensure that their home remains safe and secure.
How do you hide a power strip yourself?
If you want to hide a power strip yourself, there are various options you can choose from. One popular choice is to build a box around the power strip to hide it. To do this, you’ll need some basic supplies such as a piece of ¼-inch plywood, a saw, screws, a drill, and paint.
Cut the plywood to size and then assemble the box around the power strip, using screws to secure it in place. Once it is fully assembled, use a drill to carefully make a hole for the cord to come out of the box.
Finish up by adding some paint or wood stain for an attractive look.
Another option for hiding your power strip is to install it in the wall. You’ll need to find an appropriate spot where the power strip can be flush with the wall, and then use a drill and screws to attach it.
This is a great option if you don’t want to use a box and if you have some basic handyman skills.
If you don’t want to hide your power strip, but still want it out of the way, you can use a taller power strip to store things on top of it. This will keep your power strip safe and tidy while also allowing you to store items above it.
Whichever option you choose, it’s important to make sure the power strip is in a safe and accessible location so you can use it easily.
How can I hide my surge protector under my desk?
It is possible to hide your surge protector under your desk, depending on the type of desk, clearance and surge protector size that you have. Firstly, you will need to measure the size of your surge protector and the clearance under your desk to ensure that it will fit.
There are a few techniques that can be used to hide the surge protector.
If there is enough clearance, you could use a surface mount power strip that holds the surge protector firmly against the underside of the desk. If your desk has legs, you can create a channel under the desk to hide and secure the surge protector.
This can be done by attaching small wooden or metal boards to the underside of the desk. Alternatively, you can use zip ties to secure the surge protector between the legs of the desk.
You can also purchase a surge protector power strip that comes with mounting brackets to allow you to mount the protector onto the underside of the desk. If you have very limited space, you could consider mounting the power strip directly to the wall and running the cables up and under the desk to keep them out of the way.
Whichever approach you take, make sure that the surge protector is firmly secured and the cables are held neatly and securely in place to avoid any safety risk.
How do you hide computer cords in the desk in the middle of the room?
One way to hide computer cords in the middle of the room is to use cord covers. You can find cord covers in a range of sizes and finishes, like painted and unpainted wood, plastic, and metal. Cord covers can be easily installed on the wall or floor to contain the cables, offering a tidy and efficient solution.
You can also use Velcro strips, zip ties, or furniturize cable clips to organize the cables and keep them out of the way. If you don’t want to invest in a cord cover, you can also use a cord organizer, which is a box-like device that is designed specifically to house and protect cords.
Finally, you could install cable trays. These allow cables to be placed in a suspended tray near the ceiling. This is especially helpful if you need to run cables out of the way of other furniture.
How do I hide the cables on my computer setup?
The simplest option is to use cable clips or ties to manage the cables. This involves securely fastening the cables together, either behind the desk or under it, in order to keep them organised and out of sight.
Alternatively, you could use an adjustable cable management sleeve or trunking to effectively route the cables behind the setup, providing a more aesthetically pleasing approach. If you have some handyman skills and some extra time, you could also install an in-wall or shallow recessed cable management box that would help keep the cables concealed from sight.
Another option is to use a surge protector power strip with a rotating, swiveling, or flathead plug in order to reduce the number of cables visibly running across the floor. Finally, you can opt for a wireless connection to your computer system, which would help reduce the overall amount of cabling required.
Can a TV be fixed after power surge?
Yes, a TV can typically be fixed after a power surge, though it depends on the severity of the surge and the television itself. If the surge was small, a technician may be able to replace a few components that were damaged by the surge, and the TV will work as normal.
If the surge was more severe, it may require additional parts to be replaced or the entire logic board may need to be replaced. If the surge caused physical damage to the TV, then it may not be possible to repair it.
It’s important to speak with an experienced technician to get an accurate diagnosis of the TV’s condition and an understanding of how much it may cost to fix it.
How do I protect my TV from surge?
The best way to protect your TV from a power surge is to install a surge protector. Surge protectors are like an extra layer of protection for your appliances and electronics, such as a TV. They help to protect your television from a power surge by diverting it away from the equipment, helping to reduce the amount of voltage that reaches your TV.
Surge protectors also help provide added protection for devices connected to the TV, such as streaming devices, game consoles, and other devices that make up your TV experience. Additionally, surge protectors with individually-switched outlets are a good idea to help protect only the devices that are on, allowing you to prevent any electricity leaks when those devices are not in use.
Lastly, keep in mind that surge protectors should be tested regularly to ensure that their protection is working correctly.
What type of surge protector is for TV?
The type of surge protector that is best suited for a television is a type called a MOV (Metal Oxide Varistor) surge protector. This type of surge protector is designed to absorb excess electrical spikes quickly and safely, minimizing the risk of damage to the television.
It is usually built in to power strips and multi-outlet surge protectors, as well as some surge-protecting wall outlets. MOV-based surge protectors may also feature integrated circuit fuses for extra protection.
It’s recommended to look for surge protectors that are UL 1449 rated to ensure the best protection.
Do Samsung TVS have built in surge protection?
Yes, Samsung TVs do have built-in surge protection. All Samsung Smart TVs come with a surge protector built into the power cord, so you don’t have to worry about buying an external surge protector for added power protection.
The built-in surge protector reduces the risk of over-voltage, which can damage the TV’s internal hardware and cause physical damage. Additionally, Samsung TVs have a safety shut-off feature that automatically cuts the power to the TV in the event of a voltage surge.
This ensures your TV is safe even if the power jumps or spikes unexpectedly.
How can you protect your TV from lightning?
Protecting your TV from lightning requires a few mindful steps to ensure its safety during a storm. Physically unplugging the TV from its power source is the first and most important step. If the TV is connected to a wall outlet, pull the plug gently from the outlet in order to avoid any unnecessary shock hazards.
Disconnect any external devices from the TV, as well, such as game consoles, DVD players, and cable boxes. Each of these may be vulnerable to a power surge if hit by lightning. It’s also wise to unplug any antennae, if you have them, to prevent an electric shock from traveling through the antennae and into the television.
Additionally, you can use a surge protector to safeguard your TV from potential damage due to a lightning strike. This can give your TV an extra layer of protection, as the surge protector will absorb any excess voltage and help prevent a power surge.
Alternatively, you can also use a good quality UPS (Uninterruptible Power Supply) and a lightning arrester connected to your electricity line, but this requires professional installation.
Finally, if there is no way to protect your TV from lightning, you should keep all people and pets away from the TV during a storm. This will prevent injury should the worst occur and your TV be affected.
How many joules do I need for TV protection?
The amount of joules you need to protect your TV depends on the type and size of TV you own, as well as the surge voltage range of the surge protection that you select. On average, a standard HDTV should be protected by a surge protector with 1000-2000 joules of protection.
For 4K Ultra HD TVs, the minimum surge protection should be 2500 joules. If you have a particularly expensive or delicate TV, look for a surge protector with 3000-5000 joules of surge protection. It is also important to make sure you select a surge protector with the proper voltage rating for your area.
In the United States, most homes have a 120-volt electrical system, so look for a surge protector with a surge voltage rating of 400 Joules or more.