Hiding fireplace cables can be done in a few simple steps. Firstly, you should make sure your cables are safe and up to code, using the appropriate UL-listed electrical items. If you have an existing mantel, a great option is to use cord covers, which come in different styles and colors to match the look of your fireplace.
If your mantel is too short to allow for cord covers, you may want to try wrapping the cables in cloth tape, which can provide a neat and discreet look. You could also run the cables through the wall if you’re comfortable with basic electrical wiring and have a conduit system in place.
Finally, it’s often quite easy to hide cables between floorboards or behind mouldings to neaten up the look of your fireplace.
How do you hide the wires on a brick fireplace?
Hiding the wires on a brick fireplace can be achieved with a few easy steps. Firstly, all exposed wires should be carefully examined and disconnected if possible. Once all the wires have been safely disconnected and moved out of the way, the best option for keeping them out of sight is to purchase a cord concealer kit.
These kits come in a variety of sizes and colors and are designed to create channels through which the wires can be placed and hidden beneath the surface. If doors are to be installed around the fireplace, the wires can be threaded through the door frames, so they are safely concealed.
For aesthetic purposes, the doors may be painted to match the existing color of the fireplace. Alternatively, fabric panels can be installed to hide the wires while still allowing access to the fireplace.
Adhesives designed specifically for brick surfaces can be used to attach the fabric panels to the wall. A final option is to use a plug-in wire box, which is designed to act as a receptacle for the wires to be hidden from sight.
As always, when it comes to dealing with wiring, it is best to leave the job to the professionals for the safest result.
How can I hide my wires from showing?
Depending on the type of room and the amount of effort and money you are willing to put in.
If you don’t want to spend a lot, some simple solutions include using floor or cord protectors to conceal wires, zip ties and twist ties to keep them neat and tidy and wrapping them in decorative fabric or ribbon if they will not be moved around often.
You can also find ready-made wire covers, such as plastic or fabric tubes, to contain your wires, which can come in various sizes, colors, and designs.
If you’re willing to invest more, you should consider wiring channels, where you can conceal all your wires in recessed walls and ceilings, or even in walls or furniture. You can also purchase trunking, which are long, thin channels with flexible covers that can fit around any corners and contours, to hide your wires while protecting them from dust, dirt and wear and tear.
Finally, if you are handy with a drill, you can add a false wall by connecting two pieces of plywood and creating a secret compartment to store your wires. This is a great option if your cables run along one wall and the cables don’t need to be easily moved.
Regardless of which option you choose, taking the time to find solutions for hiding your wires is not only aesthetically pleasing – it can also prevent accidents, improve airflow, and declutter your space.
How do you hide wires when mounting?
When mounting wires, it is important to hide them in order to keep your walls safe and looking neat. This can be done in several different ways.
Firstly, you can run the wires through the wall. This involves cutting small holes in the wall, running the wires through the cavities and then using wall plates or boxes to hide the wires. This method requires careful planning and must be done with caution to avoid damaging the walls or other property.
Another option is to paint the wire in the same color as the wall. This helps to blend the wire in and make it hard to spot. This method is often easier and safer than running the wire through the walls, but it does require additional paint.
Finally, you can also use metallic conduits and piping to cover up the wire. This is a great way to make sure the wires are secure and protected, as conduit is designed for this purpose.
No matter which method you choose, make sure you read the instructions and comply with local regulations. With the right precautions, you can easily hide wires when mounting.
How do you hide electrical cords on hardwood floors?
Hiding electrical cords on hardwood floors can be a challenge, but there are several strategies you can use depending on the layout of your home and how much hassle you are willing to put into the project.
For example, if you want to invest in long-term solutions, you can use outlet extensions to make your electrical cords reach farther, and tuck them behind furniture, under carpets or rugs, or under vacuum- and waterproof covers.
You can also use paintable cord concealers to hide cords along baseboards and other hard to reach places.
If you are looking for more aesthetic options, consider using cord channels which allow you to rest the cord against the floor and paint with a matching color. You can also use velcro strips and wall clips, which are perfect for suspending cords from the wall above the floor.
Hiding your cords can be easier and more aesthetically pleasing for the eye once you consider the options.
Where do you put cable box for wall mounted TV above fireplace?
For a wall mounted TV that is positioned above a fireplace, it is typically best to place the cable box behind the TV. This helps to reduce clutter and keeps the cords well organized. If it is not possible to place the cable box behind the TV, it is best to place the box as close to the TV as possible.
Many times, a shelf or mantel can be used to hold the cable box. If the cable box cannot fit on a shelf or mantel, consider mounting the cable box on the wall near the TV. It is important to consider how the cords for the cable box can be tucked away or decorated to make them look more organized and aesthetically pleasing.
Additionally, make sure to use the appropriate cables that can withstand extreme temperatures from the fireplace.
How do I hide the wires to my wall mounted TV UK?
Hiding the wires to your wall mounted TV in the UK is a relatively straightforward process. The easiest way to do it is first to gather all the wires and secure them in one bundle with some twist ties.
Once all the wires are gathered together, cover them with a plastic trunking, using a sharp craft knife to trim the sizes accordingly. Trunking is available at most hardware stores, and will fit snuggly around the cables.
You can then use some cable staples or clips to hold the trunking in place against the wall. You can also use cable trunking with brushes to hide the cables and keep your wall looking neat and tidy. For an even neater finish, you can use some conduit pipe, which is plastic or metal piping with slots that allow you to thread the cables through and conceal them.
You can even paint the pipe to match your wall colour for a seamless finish.
How do you hide wires from fireplace without cutting wall?
In order to hide wires from a fireplace without cutting the wall, the first thing one should consider is using a mantel. This not only hides the cords, but creates a finished look as well. If a mantel is not an option, wire corner organizers can be used to route the wires to the side.
This allows the cords to be kept out of sight. One could also consider mounting the tv to the wall, as this will eliminate the need for any wires to appear in the first place. In terms of hiding unsightly cords, cable covers or cord covers can be used.
These track-like covers can be installed along the baseboard, floor, or wall and have a slit in the top to loop wires through as a way of concealing them. Black pliable rubber covers provide an easy yet aesthetically pleasing way to hide wires.
Lastly, battery powered equipment is also an easy solution to the issue of cords. This eliminates the need for any wires at all. Overall, there are several clever ways to hide the cords from a fireplace without having to cut the wall.
How high should a 65 inch TV be mounted above a fireplace?
When mounting a 65 inch TV above a fireplace, the ideal height should be eye level when you are seated in front of the fireplace. For most people, this would be around 42 inches above the fireplace mantel.
A height that is too low will cause neck strain and may also obstruct the fireplace when it’s in use. A height that is too high will also force you to crane your neck and could strain your back when you watch for long periods of time.
Generally, it’s best to mount the television between 28 to 36 inches about the mantel for comfortable viewing or use an articulating mount which allows for the TV to be adjusted for the best angle.
Can you mount a TV on a brick fireplace?
Yes, it is possible to mount a TV on a brick fireplace. However, since bricks are not especially sturdy and can become loose over time, it is important to take the necessary precautions. Start by finding a spot on the fireplace that doesn’t have any mortar and cut into the brick in order to make a flat surface for the mount.
Then, use masonry anchors to secure the mount in place. Drill pilot holes into the brick, insert the anchors, and tighten the screws until they’re secure. Be sure to check that the mount is installed correctly and can support the weight of the TV before you hang it on the wall.
After the TV is mounted, use an electrical box or an outlet to power the device. Before powering on the TV, double check that none of the wires are exposed or frayed.
How do I hide cable box and use remote?
Hiding a cable box and using the remote can be done in a number of ways. The easiest and most convenient way is to use a piece of furniture designed specifically for concealing electronics. TV stands and entertainment centers often feature closed compartments and shelves for concealing cable boxes and other components.
If you do not have access to such a piece of furniture, you can also use other methods such as case covers, boxes, and curtains.
You will first want to place the cable box in a strategic location. Keep in mind that you may need access to the ports on the back of the box, so placing it behind furniture or in an area that is not accessible may not be a practical solution.
If you have chosen to use a piece of furniture to conceal the box, you may need to drill holes in the back for cable connections. Make sure all wires are securely connected and routed.
If you have chosen a more unorthodox method such as covering the box with a box or curtain, you will also need to ensure that the item is securely attached. For example, if you have chosen to use a box, hot glue or Velcro is a great way to ensure it stays in place.
Once you have the box safely and securely contained, you can use the remote to control the box. You may need to direct the remote directly at the box or use an infrared extender, depending on what type of box you have and the materials you have chosen to conceal it.
Ultimately, you want to aim the remote at the box in the same way you would if it were not covered.
While it may take some trial and error to find a setup that works for your particular space and equipment, it is possible to use the remote to control a cable box even if it is hidden. With careful placement and the right materials, you can easily conceal and use a cable box remotely in your home.
Is TV above fireplace too high?
Ideally, the optimal viewing height for a television above a fireplace should depend on several factors, such as the size of the television, the distance from the television to the viewers, and the style of fireplace.
Generally speaking, the center of the television should be at eye-level when seated, with the ideal height being between 42-60 inches above thefloor. However, it is important to consider the size of the television you are planning to mount.
Larger TVs require higher mounting heights to prevent people from craning their necks when viewing. The recommended mounting height depends on the size of the TV. For example, a 60-inch television should be mounted at least 63 inches above the floor, while a 75-inch TV should be mounted around 66 inches high.
Additionally, you should keep in mind that the style of the fireplace may also affect the placement of the television. Gas fireplaces usually require higher mounting heights as the flames can be dangerous when placed low.
Furthermore, electric fireplaces provide a safer option, as the flames can typically be placed at eye level with the tv. Ultimately, the best way to decide the optimal height for your TV above the fireplace is to measure the different height options to determine which is most comfortable for viewers.
What do you do with cable box when TV wall mount?
When wall mounting a TV, you will have to adjust the setup to work with the cable box. Because the cable box is typically located lower than the TV, you’ll need an extension or splitter cord that allows the cable to reach from the box to the television.
You may also need to use a power bridge to allow electrical power to reach the cable box as well. Many TV mounts come with a built-in power bridge, so be sure to check that out if you’re looking for an easier setup.
Additionally, most TVs will allow for an HDMI cable to be routed from the cable box to the TV with a few additional cords. Once the cable box is routed through the TV mount, the box can be stored in a cabinet, shelf, a wall mountable bracket, or another suitable space.
Does cable box need to be visible to work?
No, it does not need to be visible to work. The cable box works by receiving and decoding signals from the cable service provider, so as long as the cable box is connected to the power source and the home’s coaxial cable, it should work.
Many people install their cable boxes behind TVs or other pieces of furniture to save space and reduce the amount of clutter in the room. Additionally, some homeowners choose to mount their boxes on their walls out of sight to give the area a more modern and streamlined look.
In order to ensure that your cable box is working properly, it is important to periodically check the connections and ensure the power source is working. If the cable box is not visible it is easier to forget to check on it, so it is important to remember that even though it does not need to be visible, it is still important to check on its status.
How can I get cable in another room without a box?
To get cable in another room without a box, you’ll need to use a splitter or an amplifier. First, locate the coax outlet in the room you wish to access cable in. Then, locate the outlet where your cable is currently connected.
Connect the two cables together using a splitter or amplifier. For a splitter, you will need to connect one cable to the “IN” port on the splitter and two cables to the “OUT” ports in order to make two connections.
For an amplifier, you will need two cables; one to connect to the “IN” port and the other to connect to the “OUT” port. Once you have your connection set up, you will need to insert the coax cable connection into the wall outlet and then connect the other end of the coax cable to the back of your desired TV.
You will then need to perform a channel scan on the TV, with the respective inputs. This should successfully provide cable in your desired room.
Will my remote work through a cupboard?
Yes, your remote should work through a cupboard in most cases. If the cupboard is made of solid wood or has a large metal door, it may interfere with the signal and reduce the range. To test if this is the case, try standing at the same distance from the cupboard as you would normally when using the remote and press a button.
If the remote does not operate correctly, the cupboard may be blocking the signal.
In any case, you can try moving the cupboard or removing the door if this is an option. If the door is necessary, you can also try repositioning your remote control so that it is as close to the cupboard as possible.
Additionally, consider relocating the receiver of your remote, if possible, to be as close to your cupboard as possible.
Finally, if none of these solutions work, you may need to invest in a higher-powered remote that is capable of sending signals through thick walls or cupboards.
Will cable box work if mounted behind TV?
Yes, a cable box will work if it is mounted behind a television. Depending on the cable box, it may need additional support or equipment to ensure it is secure and not collecting dust. Generally, the cable box should be able to detect your television’s signal and switch to it appropriately.
Depending on the cord you are using to connect your cable box, you may need to use a longer one if it is placed too far back. Once the cable box has been properly mounted, you should be able to proceed with setting up and using the box.