Installing a cabinet valance is a fairly simple process that can be done quickly and easily by almost anyone. To begin, you will need to gather your supplies, which should include the valance itself, a power drill, screws and spacers.
Additionally, you may want to grab some sandpaper in case you need to do any resurfacing of the cabinet before you start attaching the valance.
On the underside of the valance, mark the spots that correspond to the areas you will be drilling in. Once you’ve made these marks, carefully line up the valance with the cabinet, making sure the screw holes line up directly with the cabinet.
It’s crucial to make sure the valance is perfectly aligned before screwing it in.
Once your valance is perfectly aligned, carefully drill the screws into the cabinet and into the valance. Since cabinets can be fragile and vary in thickness, it’s best to use the included spacers to ensure that the valance isn’t too loose or too tight.
You may want to opt for longer screws if your cabinet is thicker than normal or installing on a wall. Once all of the screws are in place, your valance should be firmly attached to the cabinet.
It’s also important to note that depending on the type of material your valance is made of, you may need to use a different type of drill bit than the one used to screw the valance. For example, if your valance is made of metal, you may need a special larger drill bit.
If you’ve followed the instructions properly, your newly installed cabinet valance should be a beautiful addition to your home. With a little patience and care, the installation process should be a breeze.
Do you need a valance for under cabinet lighting?
No, you do not need a valance in order to install under cabinet lighting. However, if the light will be in an area that is exposed to people, a valance can be beneficial to help hide and diffuse the lighting, providing a more attractive look.
Valances can also help protect against glare and reflections on hard surfaces, such as countertops, as well as adding a decorative touch to the room. As such, if aesthetics and/or glare control are of particular concern, then a valance may be a suitable choice.
Otherwise, under cabinet lighting can be just as effective and attractive without one.
What is kitchen light valance?
A kitchen light valance is a decorative piece of wood or metal that is installed above the window or sink in a kitchen. It is used to add both decorative and functional elements to the kitchen, as it can be used to conceal a light fixture or provide a soft ambient light in the room.
Light valances come in a variety of styles and sizes and can be configured to fit any size window or sink. They are usually painted white or light colors to match the walls and surrounding decor, and can be installed as part of a custom kitchen remodel or simply hung as an accent piece.
What is the trim on top of a cabinet called?
The trim on top of a cabinet is referred to as a ‘crown moulding’. Crown moulding is an ornamental trim used to give cabinets and other furniture a more decorative and luxurious look. Crown moulding can be chosen based on the decor of your home, and is usually made from wood, plastic, or metal.
It is generally mounted directly to the wall above the cabinets, adding an interesting detail to the design and helping to bring the room together. Crown moulding is easy to install and can be found in a variety of shapes, sizes, and materials to fit any design style.
How do I finish the top of my kitchen cabinets?
When it comes to finishing the top of your kitchen cabinets, there are a number of options available to you. Depending on the look you’re going for, you may choose to paint, stain, or even wallpaper the top of the cabinets.
If you want a more traditional look, painting is a great option to give the cabinets a fresh clean look. If you prefer a more modern look, you can use stain or even wallpaper to give the cabinets a unique pop of color and texture.
Be sure to use quality materials and techniques when tackling this project, as the results will determine just how good the cabinets will look. You may also want to consider adding crown molding along the top of the cabinets for a more finished look.
Overall, with a bit of imagination and the right materials, you can easily create a beautiful finish for the top of your kitchen cabinets.
How do you cover gap between kitchen cabinets and ceiling?
Covering the gap between kitchen cabinets and the ceiling can be accomplished in several different ways. One way is to trim out the gap with narrow pieces of decorative trim. This can be stained and varnished to match the cabinets.
Crown molding is a type of trim that is often used for this purpose. Another option is to install a false ceiling directly above the cabinets. This can be finished with plaster or drywall and painted to match the cabinets.
Lastly, you can cover the gap with fabric or wallpaper to create a nice design element. As with the other options, be sure to choose a color or pattern that complements the existing kitchen design.
What trim goes at top of kitchen cabinets?
The trim at the top of kitchen cabinets can vary, depending on the overall style of the kitchen. Generally, a lined trim or edge molding is used along the top of the cabinets. This trim can come in a variety of shapes, sizes, and styles, such as a flat piece of wood, or a more decorative piece with curves or contours.
It is typically installed so that it is flush or slightly overhangs the cabinet faces, providing a finished and refined look. Light rail molding — a slender piece of trim — is often added between the upper and lower cabinets.
It provides a subtle yet elegant way to unite the design of the two sets of cabinets. Finally, a crown molding — an ornate type of trim — is installed along the upper cabinets at a slight angle to make the wall appear taller.
Crown molding is typically used to make a grand statement in more formal kitchen designs.
What is crown molding on cabinets?
Crown molding is a decorative trim typically used to finish the tops of cabinets or other architectural features. It is narrow strips of wood, usually two or three inches wide, and comes in many different shapes and sizes.
The pieces are usually cut from wood, and can be stained or painted to match the existing cabinets. Crown molding can range from simple, rounded type, to intricate carved designs. When used on cabinets, the moldings are usually attached to the upper edge of the box or cabinet frame and to the underside of the cabinet’s top.
The moldings can also add character to the cabinets, and can help to tie them in with the trim or moldings that are already in the room.
How do you attach a valance to a cabinet?
Attaching a valance to a cabinet is a fairly straightforward process and can be accomplished by following a few simple steps. First, begin by removing the existing cabinetry hardware, if any. Then, measure the valance and mark the spot on the cabinet where you want to attach the valance.
Use a stud finder to locate the studs in the wall behind the cabinet. Use screws, spacers, and anchors to attach the valance along the top of the cabinet to the wall studs. Make sure the screws are correctly fastened and will also be secure once attached to the wall.
Finally, attach the hardware back on the cabinet and, if necessary, add additional decorative features like cabinet knobs and pulls. With the valance now in place, the cabinet will look cozy and inviting.
How do you hide LED strips under cabinets?
When hiding LED strips under cabinets, the most important factors to consider are placement of the LED strips, the type of LED strips, and the type of cabinets. First, it is important to place the LED strips where they are hidden from view when the doors to the cabinets are closed.
Consider using surface mounting or adhesive mounting solutions to attach the LED strips to the underside of the cabinet frames or other surfaces.
When selecting LED strips for under cabinet lighting, there are three main types to consider: integrated LED strips, hardwired LED strips, and self-adhesive LED strips. Integrated LED strips are wired directly into the line and linked to the main power source or main fixture.
Hardwired LED strips are connected to a junction box and require professional installation. Self-adhesive LED strips are placed directly on the underside of the cabinet, providing an easy and affordable install with no wiring or extra supplies needed.
For cabinets with a small amount of space that is accessible, narrow self-adhesive LED strips can be used. Alternatively, a strip with a heavy-duty adhesive backing can be applied to a thicker surface.
If the cabinet is large and needs to be illuminated on the underside, an integrated LED strip may be the best option. Installing integrated LED strips require opening the cabinet doors, connecting the LED strips to the mains using the junction box, soldering and taping the connections appropriately, and mounting the junction box or main fixture back inside the cabinet.
Finally, it is important to consider the type of cabinets. Depending on the type of cabinets, different lighting solutions such as undermount, recess, or slimline may be applicable. Slotted j-channel, edge lighting, or corner lighting can be used between surface and recessed cabinets.
Additionally, trimless fixtures with virtually invisible illumination can be used in more contemporary designs.
In summary, the best way to hide LED strips under cabinets is to consider the placement of the LED strips, selecting the type of LED strip that fits the cabinet type best, and selecting the right solution that meets the specific Cabinet needs.
How many under counter lights do I need?
The number of under counter lights you need will depend on several factors. Firstly, you’ll need to consider the size of the area you are trying to light. If you are lighting a small space, 2 to 4 lights should be enough.
If you are lighting a larger area, such as a kitchen, 4 to 6 lights may be needed for proper illumination. You should also consider the level of brightness or illumination that you are looking for. Higher levels of illumination may require more under counter lights for adequate lighting.
Finally, the style of your cabinets and countertops may influence the number of lights you need. Darker colored cabinets may require brightness from additional lights to create the desired effect. To determine the exact number of lights you need, it’s best to consult with a professional.
How do you hide under cabinet lights with a frameless cabinet?
The first step to hiding under cabinet lights with a frameless cabinet is to make sure your lighting fixtures are designed to be installed in frameless cabinets. Many LED and low profile under cabinet lights are designed to be installed without a frame.
Once you have the appropriate fixtures, installation is relatively easy and can be done with a few basic tools.
The length of your cabinet will determine the number of lights that you need to install. If your cabinet is long enough, you may want to install multiple single lights or string lights. If your cabinet is short, then you may opt for a strip light.
Installing multiple lights will provide overall better light coverage for the cabinet.
When installing the lights, make sure to take into account airflow requirements. Since the light will be buried down in the cabinet, you will need to make sure that there is space for the heat to dissipate.
If it is not properly ventilated, the overheat can damage the light or even start a fire.
Once your light fixtures are ready to install, simply mount them to the bottom of the cabinet using the appropriate screws that came with it. Make sure to secure them properly and clip the wires into place.
The last step will be to cover the fixtures with a trim piece to give the cabinet an even appearance.
How do you remove decorative trim from cabinets?
Removing decorative trim from cabinets is not difficult but there are several steps you will need to take to complete the task. First you will need to determine what type of trim you are trying to remove.
This can be identified by examining the trim for signs of fasteners such as nails, staples, or screws. Once you have identified the type of trim, use a utility knife or a pry bar to gently remove it from the cabinet.
You may need to use a screwdriver to remove attached hardware in order to completely remove the trim. If you are having trouble removing the trim, use a light lubricant such as WD-40 to help loosen the fasteners.
While the trim is being removed, use a hand vacuum or a shop vacuum to remove dirt and debris that may have accumulated under the trim. Once the trim is removed, use a putty knife to scrape away any remaining adhesive.
Finally, use a damp cloth to remove any remaining residue before applying a new trim.
Can you take the trim off of kitchen cabinets?
Yes, you can take the trim off of kitchen cabinets. The trim on cabinets usually serves an aesthetic purpose, though it can also protect the area around the cabinets from water damage. Taking it off is relatively simple, and can be done with some basic tools.
First, use a putty knife to loosen the caulking around the trim and the walls. Place a cloth under the knife so it won’t damage the walls. Then, use a flathead screwdriver to take out the screws on the cabinet that are holding the trim in place.
You may need to use a power drill if the screws are large or difficult to reach.
Once you have taken out the screws, you can gently pry off the trim with a prybar. Be careful not to damage the wood as you remove it. Discard the trim and clean off any residue from the wall and cabinets.
Then, you are ready to reinstall the trim or install new trim.
How do I get rid of Furr?
Furr can be difficult to get rid of once it has attached itself to a surface, but with the right steps and processes, it can be managed and eventually eliminated. The first step to getting rid of furr is to assess the area and determine what kind of furr is present.
If it’s from pet hair, the cause can be tracked down and addressed – such as ensuring pets are brushed frequently. Vacuuming or sweeping is then the next step to remove surface furr, followed by a damp cloth to collect any furr remnants.
Repeat for heavily furred areas and use a lint roller or vacuuming for upholstered furniture. For stubborn furr, or sections which have become deeply embedded, use a pumice stone or fabric brush in a gentle, circular motion to break up the furr.
To prevent furr from recurring, regularly dust, vacuum, and clean fabrics and furniture with a damp cloth. Keeping pet hair in check and using an air filtration system can also help to reduce the amount of furr that recirculates through the house by trapping and collecting furr.
With the right steps, you can be well on your way to controling and ultimately getting rid of furr in your home.
What are Furr downs?
Furr downs are a type of insulation system used in homes and buildings to create a comfortable, warm and energy efficient environment. They consist of fluffed-up batts of fibreglass, rock wool, or cellulose material, which are placed between rafters and joists to create a barrier between the building fabric and the outside environment.
This helps to reduce heat transfer, improving the energy efficiency of the building and the comfort of those who occupy it. Furr downs also act as a fire barrier by keeping any flames that may occur within the fabric of the building from spreading.
In addition to thermal and fire protection, furr downs also help to reduce unwanted noise and reduce moisture levels in a building. They are often used in conjunction with other forms of insulation (such as foil-faced batts and rigid foam sheet) in order to further enhance the performance of the insulation system.
Furr downs are generally easy to install, and are a cost-effective method for improving a buildings insulation performance.
How do you hide an uneven ceiling with trim on top of the cabinet?
If you want to hide an uneven ceiling with trim on top of the cabinet, you’ll need to check the height of the cabinet and the ceiling first. You should measure from the cabinet top to the ceiling. With this measurement, you can determine the size of the trim piece you’ll need to cover the uneven area.
Once you know the size, you can cut a piece of trim to fit.
Before attaching your trim, sand the edges and then paint or stain it for a finished look. Once the trim is painted, you can attach it to the top of the cabinet and the ceiling with either wood glue or brad nails.
After you’ve attached the trim, you can caulk around the edges to create a finished look. Finally, you can touch up the trim and caulking with paint or stain.
This method of adding trim to the top of the cabinet is an easy way to hide an uneven ceiling and update the look of the room.
Why do kitchen cabinets not go to the ceiling?
Kitchen cabinets often do not reach to the ceiling for several reasons. The first reason is practicality: it is sometimes too difficult to reach and clean areas around the cabinets that reach all the way up to the ceiling.
The second reason is aesthetic: having taller cabinets can create an overly crowded and closed-in feeling. The third is the availability of the space. In some rooms, there may be ducts, pipes, roof beams, or other obstacles that can make it difficult or impossible to hang cabinets on the ceiling even if desired.
Additionally, the top of some cabinets may not be sturdy enough to bear the weight of items that are placed too high up. Lastly, some homeowners may not feel the need to maximize their kitchen storage space by having cabinets that extend up to the ceiling.