Loading a fixed line trimmer head is relatively simple and quick. First, you want to make sure you have the appropriate size replacement line and that your power is turned off. If your trimmer is newer, it will likely have an auto-feed spool head.
If so, you need to unthread the knob at the center of the head and release the line spool. Once the spool is released, remove any remaining line. If your trimmer does not have an auto-feed spool, you can simply cut a length of line to the correct length, usually around 10-15 inches, and wrap the line around the head counterclockwise from the center hole.
Do this several times until the line is wrapped around the head tightly. When done, secure the line with a piece of tape and then thread the knob or spool back into place. When finished, turn your power back on and use your trimmer as normal.
What types of line trimmer heads are there?
There are several types of line trimmer heads available, each of which has its own benefits and drawbacks:
Bump Heads: Also known as auto-feed heads, these are the most common type of trimmer head. The head consists of a spool that contains the line and a spring-loaded bump knob. To feed more line out of the head, you simply bump it against the ground.
These are the easiest to use and the most reliable type.
Flexible Heads: Flexible trimmer heads fit onto the stem of the trimmer and then the line feeds out through a hole in the top. Instead of a physical knob or spring, they contain an internal mechanism that automatically feeds out the line when it’s needed.
This type is gaining in popularity because they’re very convenient.
Blade Heads: These trimmer/edger heads usually attach to the bottom of the wand and feature a metal blade that spins quickly to cut weeds and heavy brush. This type of head is extremely powerful, but it can be dangerous to use and maintain, so be sure to read the manual for safety guidelines.
Fixed Heads: Fixed heads are the least common type and are best suited for lighter jobs. They place the line at a fixed length, allowing you to adjust the length without having to change out the spool.
It’s easy to use and great for trimming light grass and weeds.
What are the two basic types of string trimmers?
There are two basic types of string trimmers: the corded electric trimmer and the cordless electric trimmer. Both achieve the same basic result: cutting grass and weeds around hard-to-reach places. Both require an adequately charged battery or an external power cord to function.
Corded electric trimmers have a power cord that must be plugged in to an electrical source, such as a home outlet or power generator. These trimmers are typically easy to set up and have a longer battery life than their cordless counterparts.
They are, however, limited in the range of motion that can be achieved, due to the need to stay connected to a power source.
Cordless electric trimmers are powered by a rechargeable battery. This type of string trimmer is generally easier to maneuver and allows for greater freedom of movement as the user does not need to remain connected to a power source.
However, this type of trimmer has a relatively short battery life and can be challenging to replace or recharge when the battery runs out.
Can you put a speed feed head on a Stihl trimmer?
Yes, you can put a speed feed head on a Stihl trimmer. The Stihl SpeedFeed trimmer head is designed for easy, hassle-free reloading of pre-cut trimmer line without having to open the trimmer head. To reload the head, you simply insert a new spool of trimmer line into the head and twist the spring-loaded head to secure the spool.
The SpeedFeed head is compatible with most Stihl curved and straight shaft trimmers, including the FS 44, FS 55, FS 56, and FS 70. It is also compatible with the KM 56 and KM 90 Kombi Motors. To ensure compatibility with your Stihl trimmer, refer to the trimmer’s owner’s manual.
The speed feed head can increase efficiency and reduce down time when replacing trimmer line.
How do you string a universal head trimmer?
When stringing a universal head trimmer, the process can be broken down into the following steps:
1. Assemble the head trimmer by attaching the string trimmer line, cutting guard, and trimmer head cover. Ensure all screws and/or nuts are securely in place.
2. Cut the string trimmer line to the desired length, based on the size of the head trimmer. Generally, the size of the trimmer line should be 10-14 inches for smaller head trimmers, and 15-20 inches for larger head trimmers.
3. Place one end of the trimmer line into the hole in the side of the head trimmer, and then wind the line tightly around the trimmer, ensuring it is evenly spaced.
4. Secure one end of the trimmer line into the trimmer head with a small piece of tape.
5. Once the line is wound, firmly press the head trimmer cover back on.
6. Finally, assemble the cutting guard and fit it over the trimmer line.
And that’s all there is to stringing a universal head trimmer!
How do you put strimmer wire on a petrol strimmer?
Putting strimmer wire on a petrol strimmer is a relatively easy process. First, you’ll need to gather the necessary materials: the strimmer wire, a pair of pliers, and safety glasses. Once you have all the materials, you’ll need to start the process by shutting off the strimmer and unplugging it.
Next, you’ll need to remove the cutting head from the strimmer and set it aside.
Now you can begin to thread the strimmer wire into the cutting head. You’ll want to insert the wire as far as it can go, making sure that it doesn’t catch on the ridges inside the head. You can do this by rotating the wire while pulling it with your pliers.
Once you have the wire in the head properly, you can reattach it to the strimmer shaft.
Once the cutting head is reattached, you’ll need to start winding the strimmer wire around the spool in the cutting head. You’ll need to go around the spool at least three times for it to be properly secured.
Make sure to make your circles as even as possible, making sure the wire is never too tight or too loose against the spool. Once the wire is properly wound around the spool, you can take the pliers and firmly pinch the ends of the wire in place.
Finally, you can now reattach the wire cover to the cutting head. You’ll now be ready to use your petrol strimmer with the newly attached strimmer wire.
Is all strimmer wire the same?
No, all strimmer wire is not the same. Different types of wire are available for different types of strimming, depending on whether you need a light, medium, or heavy-duty model. You can choose between plastic or metal strings, as well as various lengths and diameters.
Most models feature a universal design that fits most brands of strimmers. The type of wire you need is largely dependent on the size and toughness of the vegetation you are trying to strim. Plastic strings are generally best for lighter use, while metal strings are better suited for tougher, more stubborn weeds.
Additionally, if you are using your strimmer in a rocky, uneven terrain, you may want to opt for metal wire as it is less likely to break or unravel due to any collisions. Ultimately, it is up to you to decide which type of wire best suits the purpose for which you are using your strimmer.
Why does my strimmer line keep unraveling?
There could be a few different reasons why your strimmer line keeps unraveling. The most common reason is if your line is old and worn, or if you have the incorrect size of line for your strimmer. If your line is too thick or too thin for the spool, it won’t be able to spool properly, resulting in it coming undone.
Alternatively, it could just be that your head spool is loose, resulting in the line coming undone when you start using the strimmer. It is also worth checking your line for any kinks or knots that could be causing it to be pulled from the spool more easily.
If none of these are the problem, it likely means the spool’s tension is off, meaning it needs to be adjusted or replaced.
How do I change the wire in my Bosch strimmer?
Changing the wire in a Bosch strimmer is a fairly straightforward task, but it is important to note that the configuration and assembly of individual models can vary. Before attempting to replace the wire, you should consult the instruction manual or user guide for your specific model.
To replace the wire, the following steps are generally applicable:
1. Disconnect the Bosch strimmer from power source, and ensure that the strimmer head and any other safety guards are disengaged.
2. Remove the spark plug cap to prevent accidental starts.
3. Unscrew the outer housing from the lower section, if necessary.
4. Remove the old wire from the cutting head, and discard it.
5. Measure the length of replacement wire against the retailer’s specifications.
6. If a cutting head is in place, unscrew it and replace the old wire, being careful to position the new wire correctly in the head.
7. Securely tighten the cutting head when done positioning the wire.
8. Trim the excess wire according to the strimmer’s manufacturer instructions.
9. Reattach the outer housing, and reattach the spark plug cap.
10. Follow all safety procedures before reconnecting the strimmer to the power source.
By following these steps, you should be able to successfully and safely replace the wire in your Bosch strimmer.
Are Straight Shaft Trimmers better?
Whether a straight shaft trimmer is better than a curved shaft trimmer depends on several factors. The most important factor is the type of work that you plan to do with it. Straight shaft trimmers tend to have more power than curved shaft trimmers and offer more versatility for larger areas, like mowing lawns or cutting tall weeds.
The longer length of the straight shaft also helps to reduce fatigue on the user’s arms, shoulders, and back when working for longer periods of time. On the other hand, curved shaft trimmers are lighter and more maneuverable, making them a great choice for smaller areas and more detailed work, like precision edging and trimming.
Ultimately, the best choice for you depends on the size of the area you’ll be working on and the kind of job you plan to do with it.
What’s the difference between straight shaft and curved shaft trimmers?
Straight shaft trimmers and curved shaft trimmers have several differences. Straight shaft trimmers tend to be more durable and have more power than curved shaft trimmers, while curved shaft trimmers are usually lighter in weight and easier to maneuver.
Straight shaft trimmers are more powerful and can handle more aggressive tasks like tackling thick weeds and heavy brush, whereas curved shaft trimmers are better for trimming around the garden, in tight spaces, or for more delicate trimming tasks.
The straight shaft design also allows for more attachments and flexibility for different cutting jobs. On the other hand, curved shaft trimmers are easier to use for extended periods of time because of the lighter weight and curved design, which helps to alleviate strain on the user.
Additionally, curved shaft trimmers also tend to be more affordable than straight shaft trimmers.
What is the most powerful trimmer?
The most powerful trimmer on the market today is the Husqvarna 536LiLX 25cc. This trimmer has a brushless motor that provides up to 1.2 hp and a four-stroke engine that provides maximum torque and power with minimal fuel consumption.
The electric start and one-touch stop make this trimmer easy to use and the rechargeable battery gives it a range of up to three hours. The adjustable handle and telescopic shaft make it easy to adjust and manoeuvre, meaning you can reach the highest and trickiest of branches or shrubs.
The high-powered cutting system has a 25cm cutting swathe and a 0.48mm line that helps clear away branches and brush up to 20mm in diameter. The low vibration system ensures comfort and control whilst using the trimmer.
What trimmer do landscapers use?
Landscapers typically use either a string trimmer or a brush cutter to trim and edge grass, weeds, and stubborn vegetation. With a string trimmer, a length of light, abrasive line is spun rapidly around the head, cutting the vegetation in its path.
This is an effective way to trim grass and relatively thin weeds, and is often used to edge along borders and walls. A brush cutter uses a metal blade, typically in the shape of a three‑point star, to cut through tougher and thicker vegetation such as brambles and weeds.
However, as they are more powerful machinery they must be used with extreme caution. Many landscapers also have the option or a handheld or self-propelled lawn mower if they have a large area to cut.
Which hair clipper gives the closest cut?
The WAHL Professional 5-Star Cord/Cordless Magic Clip Clipper is widely considered to be the best hair clipper for delivering a close cut. This clipper provides increased accuracy and control with a special crisp cutting blade technology, allowing professional barbers and stylists to easily create sharp, perfect lines.
It features a zero-overlap 2161 blade, making it perfect for detailed designs, hassle-free fades, and quick touch-ups. It also offers adjustable taper control to deliver a personalized cut experience and make it easy to go from a fade to detail work with just a few simple clicks.
The clipper is equipped with Lithium-ion battery technology, providing up to 90 minutes of cordless run time per charge. Additionally, it is designed for comfort and maneuverability, making it a great choice for all-day use.
Which is trimmer?
Comparing the two tools, a trimmer is more lightweight, portable, and easier to operate than a lawn mower. Trimmers are often smaller and weigh less than lawn mowers, so they are much more convenient to store and transport from place to place.
Plus, they are easier to maneuver because they are designed to use in tight areas and around landscape features.
Trimmers also require less power and noise, making them much more eco-friendly than gas-powered lawn mowers. A standard string trimmer can usually be operated with just one hand, so they are safer to use than heavier and more dangerous lawn mowers.
Lastly, they are designed to trim grass and small vegetation, while a lawn mower is designed to cut the entire length of the grass.
Do trimmers give a close shave?
Yes, depending on the type of trimmer you have, you can experience a close shave. Hair trimmers usually feature adjustable grooming combs that allow for various cutting lengths, but usually the shortest comb setting will give a close shave.
Traditional wet shaving with a razor will provide a much closer shave than a trimmer, but trimmers are preferred in certain cases where very short hair is desired. For example, they are preferred for haircuts and styling bald fades, as they create a very close and crisp line without the risk of cuts associated with a razor.
Some trimmers even come with a feature to remove the guard completely, which will give an even closer shave.