When lubricating your Blendtec blender, you should first unplug the appliance and remove the jar from the base. You’ll then want to locate the lubrication valve on the base beneath the motor. The valve can usually be found easily as it will be labeled.
Depending on the model, you may need a medium-size Phillips head screwdriver to turn the valve counterclockwise.
Once you’ve located the valve, you can insert the lubricant into the Blendtec base. The lubricant may come in the form of aerosol spray, oil, grease, or a tube. Pay attention to the instructions on the packaging your lubricant came in, as some may require being heated or placed in the refrigerator beforehand.
Once the lubricant is in the Blendtec base, turn the valve clockwise to seal it. Then, plug the appliance back in and, using the pulse setting, run the motor for 30 to 60 seconds. This will help to evenly distribute the lubricant and make sure it gets everywhere it needs to be.
Finally, remove the jar again and place a few drops of the lubricant on the blades, saying sure to coat them completely. Once done, put the jar back on the base and you’ll be all set.
How do you clean a Blendtec blender jar?
Cleaning a Blendtec blender jar is fairly straightforward and easy to do. The first step is to unplug the blender and let it cool if it has been used recently. The jar should then be placed on a protected counter/surface, and the lid and clear plastic touch-pad panel should be removed.
Then, fill the jar with warm, soapy water and allow it to sit for a few minutes before scrubbing with a soft sponge or long-handled brush. After cleaning, empty the jar and rinse it with warm water. Finally, reassemble the lid and clear plastic touch-pad panel and press ‘Clean’ on the blender touch-pad to activate a self-cleaning cycle.
The blender jar should now be cleaned and ready for another use.
Why does my Blendtec smell like burning?
If your Blendtec is smelling like burning, it could indicate several issues. First, you may be using an ingredient or combination of ingredients that are too thick or too gritty. If the ingredients you are blending are too thick they can cause excessive heat and friction, leading to a burning smell.
Additionally, the motor could be malfunctioning, or in need of a new belt. If either of these are the case, it is best to contact the Blendtec warranty department for assistance. Finally, it is also possible that some food residue has collected and is burning in the motor as you use it.
If this is the case, you should be able to stop the cycle, turn off the Blender, and use a damp cloth to wipe away the residue.
It is important to always adhere to your Blender’s guidelines regarding the intended use of ingredients, so as to avoid any damage to the motor or create any potential fire hazards. If the burning smell continues after cleaning and the Blender is still within the warranty period, it is best to contact the Blendtec warranty department.
Does Blendtec have a lifetime warranty?
Yes, Blendtec does provide a lifetime limited warranty on all blenders that are purchased directly from Blendtec or an authorized retailer. The lifetime limited warranty covers residential use for the entire life of the blender container or jar.
The lifetime warranty covers manufacturing defects, but it does not cover normal wear and tear. Additionally, the warranty does not cover misuse or abuse of the blender. If you have any problems with the blender, they should be reported to Blendtec within the warranty period.
If you need to return the item, you will be given instructions and must attach a copy of the proof of purchase. Once the product is received, it will be inspected and, if necessary, repaired or replaced, at Blendtec’s discretion.
Does Starbucks use Blendtec or Vitamix?
No, Starbucks does not use Blendtec or Vitamix for its coffee blends. Instead, Starbucks has chosen to use a line of grinders, roasters and other equipment from companies like Ditting, Mahlkonig, and Bunn.
These machines are specifically designed to produce the precise grind, roast and flavor that Starbucks has come to be known for. The Mahlkonig EK43 grinder has become an iconic symbol of Starbucks quality, as its precise grinding technology allows for an even and consistent espresso extraction with every pour.
Additionally, all of their brewing equipment is thoroughly tested and inspected by the Starbucks Quality Assurance Team. This ensures that each cup produced, whether in-store or via one of the many delivery services, will be of the same undeniable Starbucks quality the world has come to expect.
Can a Blendtec be repaired?
Yes, a Blendtec can be repaired. Depending on what type of problem you are experiencing, there are different methods that can be used to repair it. If it is a matter of replacing a part, you can either contact the manufacturer or find the part and replace it yourself.
If the motor or other components have stopped working entirely, you can take the blender to a certified technician to diagnose and repair the issue. It is important to note, however, that many repairs are not covered under warranty so you may be responsible for the cost of the repair.
How do I claim my Blendtec warranty?
In order to claim your Blendtec warranty, you will need to contact their Customer Care department. You will need to provide the serial number from your product, along with the date of purchase and the name of the original purchaser in order to file a claim.
To contact Customer Care, you can either call them at 1-800-BLENDTEC (1-800-253-6383) or submit a request on their website. On the website, you will need to register an account in order to submit a support ticket.
Once your warranty claim is received, a representative will contact you within two business days to discuss the details of your claim and provide instructions on how to proceed.
What do you do when your blender stops working?
When my blender stops working, the first thing I do is try to troubleshoot the issue. This includes ensuring the power cord is securely plugged in, checking the breaker, and ensuring that all of the components of the blender are correctly installed.
After that, I go through the users manual to rule out any possible fix for the issue. If the troubleshooting steps don’t help resolve the issue, I reach out to the customer service team for the blender’s manufacturer for help.
Depending on their warranty, I may be able to get a replacement part or the entire blender at no cost. If the warranty has expired, I look into how to replace the part or how to purchase a new blender.
Why does my blender not blend?
The most common cause is a lack of power or a malfunctioning motor. Check the outlet to make sure the blender is plugged in securely and there is a good connection. Make sure the power switch on the side of the blender is switched to ‘on’.
You can also try unplugging the power cord and plugging it back in. If the power outlet is working and the blender still will not blend, the motor may need to be checked by a professional.
Other possible causes include clogged blades and a lack of liquid. Check to make sure the blades are not clogged with small particles and the container has enough liquid in it to move the contents around.
If the blades are clogged, try using a wooden spoon or similar tool to dislodge the material and clear the blades.
If none of the above solutions help, it may be time to check the connection between the base and container. Remove the container from the base and check the seal to make sure it has not been damaged or is not obstructed.
Additionally, check to make sure the drive shaft coupler, the part that connects the container and base, is in place and that none of the parts are loose or broken. If the problem persists, you may need to replace the container.
How do I fix Blendtec overload?
First and foremost, if you are experiencing an overload issue with your Blendtec blender, unplug the appliance immediately to ensure safety. This will also ensure that any associated risk of fire or injury is averted.
Once unplugged, take a look at the power cord and blender itself to see if the issue may be a result of the cord or accessories. Ensure that the cord is secured in the wall and that blades or other accessories are securely placed in the blender pitcher and have no holes or dents.
If you find any issues with the cord or accessories, it may be a good time to replace them as other issues may arise in the near future.
If the cord and accessories look to be in working order, you can try placing the blender in “Reset Mode. ” To do this, hold the “Blend” and “4” buttons down simultaneously for at least 4 seconds until the reset is complete.
If this does not work, the overload sensor may have been triggered and will require further troubleshooting or replacement.
It is recommended that you consult your owner’s manual or contact Blendtec directly if you are unsure of how to proceed. It is also best to ensure that you always use your Blendtec blender as intended, to avoid overloading, as this can cause permanent damage to the motor.
Can I put hot liquid in my Blendtec?
Yes, you can put hot liquids in your Blendtec. It is safe to heat liquids up to 195°F/90°C, but it is important to note that in order to do this, you must use the Hot Soup or Juicer cycle. For guidance on using the Hot Soup or Juicer cycle, consult the manual that came with your Blendtec blender.
Additionally, for your safety, never blend ingredients at temperatures above 195°F/90°C without using the Hot Soup or Juicer cycle. Use caution when handling hot liquids and always exercise extreme care when blending hot liquids.
What can you do with a broken blender?
If you have a broken blender, there are several things you could do. First, you should assess the damage to determine the cause of the problem. Depending on the type of blender you have, it’s possible that you just need to replace a part.
Check the owner’s manual to see if there are any parts that can easily be replaced, such as the gasket, blades, or motor. If doing so can fix the problem, you can order these parts online, or buy them from an appliance store.
If the damage is more severe, then you can look into having it professionally repaired. Many appliance repair shops have experienced technicians that can diagnose the problem and make the necessary repairs.
If this is the case, then you will need to take the blender in for service.
Another option is to recycle the blender, if possible. You can search for recycling centers near you that can help responsibly dispose of the blender.
Finally, if you no longer want the broken blender, then you can donate it or sell it. There are many websites and organizations that will take used or broken blenders and put them to good use.
No matter what option you choose, be sure that you take the appropriate safety precautions when disposing of a broken blender.
Can a blender overheat?
Yes, a blender can overheat but it’s not common. If a blender is used more than normal, such as making multiple batches of smoothies or large amounts of soup, the motor can become too hot, causing it to overheat.
When this happens, the blender may stop working and a small amount of smoke or steam may come from the base. If this happens, it is recommended to unplug the blender and allow it to cool off before completing the task.
It’s also important to keep the vent openings on the base of the blender free from anything that can block the air vents, such as spilled liquid or pieces of food. It is also a good idea to not use the blender for too long at a time, and to give it a break every now and then.
Finally, it is best to make sure the blender is firmly plugged into the outlet and is not being used near anything that could be a fire hazard, such as a stovetop.