Making lined rod pocket curtains is a great way to make your home appear more inviting, and achieving the custom look of professionally finished curtains can be easily done.
The materials you’ll need for making lined rod pocket curtains include fabric for the main panel, fabric for your lining, curtain rods, and thread. Measure out the length and desired width of your panels and then add six extra inches to both measurements.
This is because the extra inches are needed for the rod pockets, hem, and seam allowances.
Next, cut out your fabric according to the measurements you’ve taken. It’s recommended that the lining fabric should measure one inch narrower than the main fabric. After the fabric is cut out, you can sew together the lining and main panels on the long side with a half-inch seam allowance.
Once the seams are sewn, press them open with an iron. Place the lining onto the main fabric and finger press the seams on the top edge. The top edge will become the rod pocket, so turn it over so the wrong sides are facing together.
Sew the top half-inch seam allowance with a straight stitch. Once the pocket is done, hem the two short ends using a matching thread.
Finally, use a hand sewing needle to thread the rod through the pocket. Hang the curtains on the rod, and your lined rod pocket curtains are complete!
How do you put a lining in a curtain?
To put a lining in a curtain, you need to first measure the window to the exact size and make the curtain lining to the same size. Choose lining material that is the same or similar weight as the fabric of the curtains, such as silk satin or light cotton.
Begin sewing the lining onto the back side of the fabric with a sewing machine. Make sure that the top of the lining is lower than the top hem of the curtains to create a pocket. Finish the first side of the lining, then move on to the other side.
Pin the sides of the two fabrics together, thread the sewing machine with matching thread, and sew along the edges of the curtain. Once the pockets are complete, turn back the fabric away from the lining and press it with an iron.
Use the same stitching around the rod pocket on the back of the curtain. Turn back the pocket a few inches from the top hem and press. Finally, hang the curtains back onto the rod and enjoy!.
How do you convert pinch pleat to rod pocket?
To change a pinch pleat curtain to a rod pocket, you will need the following supplies:
• Curtains (with pinch pleat heading)
• Measuring tape
• Pen
• Sewing machine
• Thread
• Sewing scissors
First, measure the width of your curtain. Then, measure and mark a rod pocket line on your curtain. This should be about an inch above the pinch pleat header.
Next, sew your marked line using the sewing machine. Make sure to back stitch the beginning and end of the line in order to secure it.
After the rod pocket line is sewn, cut away the excess material that extends beyond the line using a pair of scissors.
Now, hem the remaining sides of your curtain, starting with the bottom edge. Then, sew a hem to the top of the rod pocket line. This will give your curtains a cleaner, finished look.
Finally, insert the curtain rod into the freshly-made rod pocket and hang the curtains in the desired position.
And that’s it. You’ve just successfully converted a pinch pleat heading to a rod pocket perfectly.
Can you use drapery pins on rod pocket curtains?
Yes, you can use drapery pins on rod pocket curtains. These are specially made pins that are designed for use on rod and pole pocket curtains. They have different sizes to fit onto different size rods.
They also have a variety of finishes, such as antique brass, rubber, and chrome, and are sturdy enough to securely hold your curtains in place. To use these pins you need to fit them onto the rod pocket at the top of your curtains, making sure they are secure.
Then attach the curtains and rods to the wall or ceiling, and hang them in the desired position. Finally, add your tiebacks, if desired, and enjoy your beautiful drapes!.
Can you take pleats out of curtains?
Yes, it is possible to take pleats out of curtains. This typically requires the use of an iron, although some people may use a steamer. When ironing out pleats, it is important to make sure the fabric is not exposed to too much heat or it could become damaged.
After the pleats are out, you may need to touch up any creases left behind in order to make the curtains appear neat and even. Depending on the type of fabric, you may need to turn the curtains over and iron or steam on the reverse side to avoid damaging the surface of the curtains.
It is also important to use a low heat setting when pressing the curtains in order to protect the material. Once you have removed the pleats, hyou may need to adjust the hemline and re-fold the curtains.
How do you make curtains look expensive?
Making curtains look expensive is relatively easy and can be achieved in a few simple steps.
First, use a good quality fabric. Fabrics such as velvet, silk, and linen will all give off an expensive look and feel. Using any of these heavier fabrics will also add weight and texture to the curtain, for an even classier look.
Second, opt for a richer colour that suggests extravagance or luxury. Strong, dark neutrals such as navy and olive as well as metallics can all lend a higher-end look to curtains.
Third, sew or iron on trims and curtain decorations to give the curtain an extra luxurious appearance. Adding tassels, rope ties, and pom-poms will complete the look and bring a touch of sophistication to the curtain.
Finally, consider the type of hardware used to hang the curtains. Opt for sleek and modern curtain rods made of metals like brass, or pick curtain rings that feature interesting designs or prints. Installing the right hardware will make all the difference in the overall expensive look of the curtain.
How much narrower should curtain lining be?
The width of curtain lining should always be narrower than the width of the curtains. Generally it is recommended that curtain lining should be between 4 – 6 inches shorter than the curtain size. However, this may vary based on the look or effect you are trying to achieve; for example, for heavier curtains it may be desirable for the curtain lining to be wider than 6 inches narrower than the curtain.
It is also advisable to check the length of the lining before purchasing, as it may need to be trimmed to the right length if not already sewn to the correct size.
Do I need to line my curtains?
No, it is not necessary to line your curtains, however, doing so may offer several benefits. Lining your curtains can protect them from fading caused by direct sunlight. It also prevents air drafts, which helps reduce energy costs for heating and cooling.
It can improve the drape and look of your curtains as well. Additionally, lining makes the curtains fuller and heavier, offers additional sound insulation, and is an extra layer of protection from dust.
When lining your curtains, be sure to check the manufacturer’s instructions for the type of fabric you are using. Some fabrics may require special care or different types of lining. Ultimately, the decision to line or not to line your curtains comes down to your personal preference.
How do curtain liners work?
Curtain liners are an added layer that helps to add insulation, reduce noise, and darken a room. Some curtain liners are white or off-white and provide a thermal layer for windows and doors. Other curtain liners are made of thicker fabrics and colors that block out even more light and noise.
Additionally, some curtain liners may be lined with a material that repels water, adding another layer of insulation and protection.
When used with curtains, the liner provides an extra layer that helps absorb sound, keep the room cool or warm, and darkening the room. It can also help to protect the curtains from fading as the material is thicker than regular curtains, thus blocking out more of the sun’s rays.
Some curtain liners are slightly sheer, allowing some light to diffuse through the fabric while still providing some coverage.
To install a curtain liner, it is simply hung behind the regular curtain rod, using the same type of curtain rings and drapery hooks used with standard curtains. Many curtain liners come with a rod pocket, allowing them to be attached to the rod with a grommet or snap close system.
The curtain liner can then be pulled to the side when desired.
Can you sew curtain panels together?
Yes, you can definitely sew curtain panels together. Depending on the type of fabric you have, you would either use a sewing machine or hand sew them together. If you are using a sewing machine, you will need to pick the correct stitch setting for the type of fabric you’re using.
If you’re hand-sewing the panels, you may want to do either an overstitch or backstitch. Make sure you check if the panels are the same size and if any of them have a pattern that should match up. Once you have the panels together, you may want to use an iron-on hem tape to hem the edges of the panels.
This will give them a nice, finished, tailored look.