Making piping for seat cushions is a moderately straightforward process that just requires a few specialized tools and materials. It involves cutting the fabric for the piping and then joining the fabric edges together around a cord.
To start, you will need to cut the fabric for the piping. To do so, you need to take into account the width of the cord that you will be using, as well as the amount of fabric that you want the finished piping to have.
Typically, the fabric should be cut to a width that is double the width of the cord you are using, plus 1/2 inch. Once you measure and cut the fabric, use an iron to press a 1/2-inch hem on each side of the cut fabric.
When you fabric is cut and hemmed, you should sandwich the unwound cord in between the two hems and pin it in place using straight pins. The next step is to sew the piping together. You may either use a zipper foot or cording foot to sew the fabric around the cord.
If you are using a machine, simply lower the presser foot, and follow the edge of the piping to the other side, stitching it shut.
Once the piping is to the other side of the cushion, you will need to cut off the excess fabric and secure the end. You can do this by turning the fabric diagonally, folding it over itself and stitching over the edge.
Once you have completed this process, you can insert your piping into the existing cushion and enjoy a beautiful, decorative finish to your furniture piece.
How do you make your own piping?
Making your own piping can seem like a daunting task, but with the right materials and a few basic sewing skills, it is fairly straightforward. To start, you will need some cotton or poly-cotton fabric, scissors, a sewing machine, straight pins, and bias tape to use as binding.
You will also need thread to match the color of your fabric.
Once you’ve collected your materials, the process of making your own piping can begin. First, you’ll need to cut the fabric into a strip at least two-times the width of the piping. Next, press the edges of the strip inwards to make a crease in the center.
Then, take the bias tape and fold it around the creased fabric strip, making sure the folded edges of the tape and fabric match up. You’ll then need to pin this folded assembly together so it can be stitched; the bias tape should be extending about one-fourth of an inch on the outside of the fabric.
Sewing the piping is the next step. Place the assembly in the sewing machine and use a zigzag stitch to seal the binding and fabric together. This will ensure that the finished piping looks neat and attractive.
Finally, trim the excess fabric from the outside edge of the piping and you’re done!.
Making your own piping can seem intimidating at first, but with a few sewing skills and a bit of patience, it’s entirely possible to create attractive piping for all of your home projects.
What size piping cord should you use for cushions?
The size of the piping cord you should use for cushioning depends on the size and shape of your cushion project. Generally, a 1/4 inch-wide cord will work well for most standard-sized cushion projects.
If the cushion is large and/or contains complex tufting, you may need a wider cord, such as a 3/8 inch-wide cord. When selecting your cord, make sure it is strong and durable to ensure that your cushion will last for many years.
Additionally, be sure to select a color that complements the design of your cushion project.
What is Cording called in upholstery?
In upholstery, cording is the process of creating a tailored and decorative trimming for an upholstery project. It involves hand-sewing lengths of fabric and trim, such as nylon, cotton, or jute cording around the edges of a piece of furniture.
This is done to add a decorative and finished look to furniture pieces, or to hide the edges of newly-reupholstered pieces. This process requires precise attention to detail and a good level of skill.
Once completed, the desired effect of the cording should be even and symmetrical, following the shape of the piece. Upholstery tools, such as a curved needle, seam ripper, tweezers, and curved scissors are usually used to achieve the desired effect.
Is welting the same as piping?
No, welting and piping are two different techniques that are used in upholstery. Welting is a long, narrow band of fabric that is sewn along the seams of a cushion or other upholstered piece. The welting is decorative and is traditionally a contrasting color or texture to the main fabric.
Piping, on the other hand, is a strip of fabric that is rolled and then sewn into a seam or cushion edge. It has a similar purpose to welting, but its shape and the way it is attached is different. Also, it’s typically a heavier, more durable fabric than welting, like leather or a thicker fabric, so it can create a stronger edge to the upholstery.
How do I figure out how much fabric I need for a seat cushion?
In order to determine how much fabric you need for a seat cushion, you need to take the following steps:
1. Measure the cushion. You will need to measure the length, width, and depth of the seat cushion.
2. Determine how much fabric you will need. To determine how much fabric you need, you can use a formula. Multiply the length, width and depth of the cushion together and then multiply that total by two.
This will give you the total square footage of fabric needed for the seat cushion.
3. Allow for seam allowances. When purchasing or cutting fabric for a seat cushion, it is important to remember to allow for seam allowances. Generally, an extra 2-4 inches should be allowed for adequate seam allowances.
4. Consider any patterns or designs. If the fabric you are using for your seat cushion has a pattern or design, make sure to consider this when purchasing or cutting fabric. Consider both the pattern and design repeat, as well as the positioning of the pattern or design when purchasing or cutting the fabric.
By following the above steps, you should be able to accurately figure out how much fabric you need for a seat cushion.
How much does it cost to reupholster 6 dining room chairs?
The cost to reupholster 6 dining room chairs depends on several factors, including the size and type of fabric, the type of furniture, and the labor costs associated with the work. For example, chairs with intricate designs may require more time and fabric to reupholster, while a regular wooden chair may require less.
Additionally, the type and grade of upholstery fabric you choose can dramatically affect the cost. In general, you can expect the cost to range anywhere from $750 to $1500, depending on the type of chair being reupholstered, the complexity of the project, and the type and quality of fabric chosen.
How do I calculate how much fabric I need?
When it comes to calculating the amount of fabric needed for a project, there are several factors that must be taken into account. First, you will need to decide on the size of your desired project. Measure the dimensions and mark out these measurements on the fabric with either a rotary cutter or tailor’s chalk.
Once complete, factor in allowances. Seams will require seam allowances, while hems, collars, cuffs and buttons may need extra fabricated. Try to cut the fabric pieces as close together as possible to reduce wastage.
Finally, you should consider the fabric’s pattern repeat or motif. Depending on the size of the motif and the size of the fabric pieces you require, you may need to make sure that the motifs on the pieces align.
This can make the fabric requirement to be higher than the initial estimation. Once calculations are complete, make sure to double check the measurements and total amount of fabric needed, to ensure the project is a success.
Can you reupholster a chair without taking it apart?
Yes, in certain cases you can reupholster a chair without taking it apart. If the frame of the chair is fully wrapped with a single piece of fabric, then it may be possible to leave the bottom cushion attached and work over it.
This process is known as “drop-in reupholstering”, as the fabric is dropped in over the top of the chair and then stapled in place. However, if the chair is made of multiple pieces of fabric, such as a sofa or loveseat, then it is necessary to take it apart before beginning the reupholstering process.
Taking the furniture apart will allow you to thoroughly inspect the frame and any springs or webbing, replacing any that are damaged. This will ensure the chair is as structurally sound as possible before you begin to add the new fabric.
Additionally, it can be helpful to take apart the chair while reupholstering in order to get into all of the difficult corners that might otherwise be impossible to reach.
Can you easily reupholster a chair?
Yes, you can easily reupholster a chair given the right tools and a little bit of creativity. The meticulous task of reupholstering a chair is made easier if you follow a few instructions. Start by stripping the chair of its old fabric and removing any nails or staples.
To prevent ripping the wood, use a pair of pliers to slowly pull out the staples. Once the old cloth is removed, use a thin material to create the padding and securing it with staple gun. Measure the fabric needed to cover the chair and pin it together to avoid making a mistake.
Once the fabric is cut, use a staple gun to tightly secure it. Finally, trim the excess fabric. To give the chair a finishing touch, add trim around the edges or replace any worn or missing buttons. Reupholstering a chair is an enjoyable creative process that can give an old chair new life.
What is the easiest way to reupholster a seat?
The easiest way to reupholster a seat is to begin by removing the old upholstery, starting with the staples that keep the fabric in place. Once the staples have been removed, carefully remove the fabric from the seat cushion and back piece.
Make sure to take off all the spring coils and framework. Next, use a staple gun to secure the new fabric to the back of the seat cushion and back piece. Then work your way around the perimeter, taking care to keep the fabric tight and free of wrinkles.
Make sure to pull all the fabric taut so that no wrinkles or folds are visible. Once the new fabric is secured to the frame, you’ll need to reattach the spring coils and other framework to the seat. Finally, use a hammer to secure any extra staples that might be needed to keep the fabric in place.
With a bit of patience and some effort, you can easily and successfully reupholster a seat.
Can I reupholster without a staple gun?
Yes, it is possible to reupholster without a staple gun. There are other methods of attaching fabric to furniture, including gluing, tacking with a hand tool, and upholstery gimp. Glue can be used to securely attach the fabric without leaving any visible traces.
Tacking with a hand tool, like hammer-headed tacks and upholstery nails, can also provide a secure attachment. Upholstery gimp is a fabric-covered cord that is wrapped around the perimeter of the furniture and stapled in place.
All of these methods can achieve a secure attachment, but the use of a staple gun for reupholstery will be the quickest and most reliable way to attach fabric to furniture.
What kind of material do you use to reupholster a chair?
When it comes to reupholstering a chair, the type of material you use depends on the look and feel you are wanting to achieve. There are a variety of options to choose from. Common materials used for upholstering chairs include cotton, velvet, nylon, and faux leather.
Cotton is a great choice if you’re looking for something that is durable, comfortable, and easy to clean. Velvet lends a more luxurious touch to a chair and is available in a variety of colors and patterns.
Nylon is a great choice for heavy-use chairs, as it’s more resistant to dirt and wear and tear. Faux leather is a great way to get the look of real leather without the added cost, and it’s also easier to maintain.
Similarly, you can opt to use a performance fabric, which is designed to be resistant to spills, stains, and fading. Depending on the look you’re going for, you can mix and match different fabrics or create a hybrid between two materials.
There are limitless possibilities when it comes to upholstering a chair!.