To put a new line on a Craftsman trimmer, you will need to remove the old line first. To do this, turn off the trimmer and remove the spool. Take out the line and then rewind the spool following the direction marked on the spool.
Make sure to wind the line in tightly, but not too tight. Once you’ve rewound the line, cut it off and tie it off to the notch in the spool. Now, insert the spool back into the trimmer and tighten the screws.
After this, you’re ready to use your trimmer with the new line. Enjoy!.
How do you attach a strimmer line to a Black and Decker?
Attaching a strimmer line to a Black and Decker Grass Trimmer is a straightforward process. Before beginning, make sure your trimmer is turned off and the trimmer spool is completely empty.
Step 1: Open the trimmer spool cover. This can typically be done by pushing on the spool cover and turning it in an anticlockwise direction.
Step 2: Place the trimmer line onto the spool and wind it in the same direction as shown. Generally, this is done clockwise, although it may depend on the specific model of trimmer you have. Wrap the line firmly, but not too tightly, across the spool in a diagonal pattern.
Ensure that the ends of the line are even with each other.
Step 3: When done, pull each end of the line through the side holes of the spool cover and then close the cover.
Step 4: Replace the cap on the trimmer and you’re done.
Why is my gas Weed Eater not starting?
If your gas Weed Eater is not starting, the problem could be due to a number of different factors. First, make sure to check your fuel mixture is correct and that you are using fresh fuel. If that is not the issue, the next step is to take a look at the spark plug.
Make sure it is clean, free of debris, and properly connected to the ignition system. If the spark plug looks fine, next check the air filter. A clogged air filter can cause issues with starting the Weed Eater.
If the air filter looks clean, ensure that the carburetor is adjusted to the correct settings. Finally, if all of the above checks out, you may need to perform a compression test to check for an internal engine problem.
If the compression test shows a problem, the Weed Eater may need to be serviced or replaced.
How do you wind weed eater string?
Winding the string on a weed eater is an important part of regular maintenance. Making sure that you stay on top of this task will help to keep your weed eater running in optimal condition. The following steps cover how to wind weed eater string.
Before you start, you will need the following materials:
– Weed eater
– String spool
– Philips screwdriver
Once you have these materials, you can start the process of winding weed eater string.
1) Turn off the weed eater and unplug it from the power source.
2) Take off the protective shield on the trimmer head. This can be done by unscrewing the nut with a Philips screwdriver.
3) Separate the string spool from the trimmer head.
4) Take off the old string from the string spool and disposed of it.
5) Bend about 8-10 cm (3-4 inches) of the new string around the string spool with one hand. Make sure the string is tightly wound and there are no gaps.
6) Use the other hand to wind the string onto the spool, clockwise. Keep winding the string until there are about 2 cm (0.7 inches) of space between the string and the spool.
7) Cut one end of the string from the spool and attach it to the nodule at the centre of the spool.
8) Install the spool back into the trimmer head.
9) Secure the trimmer head with the nut that you removed earlier.
10) Pull on the string until it is taut.
And that is how you wind weed eater string!
Who makes Weed Eater brand?
The Weed Eater brand is currently owned and operated by the MTD Products Inc. This company is based out of Valley City, Ohio and is one of the leading manufacturers of outdoor power equipment across the world.
MTD has over 90 years of experience in the power equipment industry and has been producing the Weed Eater brand for over 50 years. The Weed Eater brand specializes in producing all types of string trimmers and blowers for residential and commercial use.
Their products come in a variety of styles and sizes and are designed to fit different budgets and needs. To ensure the highest level of quality, all Weed Eater products are made in the USA, except for a few specialty items.
With a commitment to continuous product improvement and customer service, Weed Eater is dedicated to providing their customers with a complete weed control solution.
Who manufactures Troy-Bilt string trimmers?
Troy-Bilt string trimmers are a popular choice for small lawns, and they are manufactured by MTD Corporation, an American manufacturer of outdoor power equipment. Headquartered in Valley City, Ohio, MTD has been in business since 1932 and produces a wide range of products, including Troy-Bilt systems.
Troy-Bilt produces gas and electric string trimmers, all of which are backed by a two-year limited warranty. The products are durable, reliable, and affordable, making them a great choice for homeowners who are looking for a reliable way to clean up their lawns.
Where are Stihl string trimmers made?
Stihl string trimmers are made in Virginia Beach in the United States, as well as in Germany, China, and Brazil. The assembly of Stihl trimmers is done in the Virginia Beach facility, with parts coming from their U. S.
and worldwide suppliers. Stihl is committed to manufacturing their products efficiently in order to ensure that customers have the best product available. Their German and worldwide suppliers produce components for Stihl trimmers made in the U. S.
, ranging from spark plugs to trimmer drive shafts. This strategy of sourcing from all around the world helps Stihl to keep prices competitive while providing their customers with the highest quality trimmers.
Is ECHO as good as STIHL?
Overall, both Echo and Stihl are excellent outdoor power equipment manufacturing companies, and they both have reliable products. Comparing the overall quality and reliability of Echo versus Stihl is difficult because they both put out high-quality products.
Generally speaking, both Echo and Stihl use high-grade materials and components in their products, and both companies have a great reputation for standing behind their products.
When it comes to mowing and hard landscaping, Echo and Stihl have a lot of comparable options. Whether you’re talking about trimmers, cultivators, brush cutters, chain saws, blowers, or edger/trimmers, both companies provide durable and reliable products.
However, many people prefer Stihl for sleek, lightweight designs that make it easier to get into tight spaces and handle fatigue in tough jobs.
Echo offers a wider variety of products than Stihl, so users looking for more specialized tools might find Echo to be a better fit. Echo also has a short warranty period compared to Stihl, so Stihl might be a better option for those seeking a longer warranty.
Additionally, many people prefer the convenience and reliability of the Stihl service network for repairs, troubleshooting, and parts.
Considering all of this, it’s difficult to definitively say if Echo is better than Stihl, or vice versa. Ultimately, the best option for you depends on your specific needs, budget, and preferences.
Is Husqvarna made in China?
No, Husqvarna is not made in China. Despite the fact that many people believe Husqvarna is made in China, they are not. They are actually owned by the Swedish company Husqvarna AB, which is headquartered in Sweden.
The company has been in existence since 1689, and produces a variety of outdoor power products, from lawn mowers to chainsaws. They have operations in many countries, including the United States and Canada, but their main manufacturing operations are located throughout Europe.
Who makes Kobalt trimmer?
Kobalt trimmers are manufactured by STIHL Inc. , a German outdoor power equipment company founded in 1926. Founded by Andreas Stihl, the company produces a wide range of outdoor power tools, including trimmers, blowers, edgers, and mowers.
All of their products are designed to be lightweight and easy to use, and are built to last. STIHL is currently one of the world’s leading brands when it comes to outdoor power tools, and their Kobalt line is no exception.
The Kobalt brand offers high-performance cordless and electric trimmers as well as products with autocut heads, allowing for speedy and accurate trimming. The company also produces cordless blowers, edgers, and mowers of varying sizes, making it the perfect choice for any outdoor power equipment need.