Removing a tub drain catcher can be a challenging task, but with the right tools and some patience, it can be done. First, you’ll need to locate the drain cover. It is usually located underneath the stopper lever, at the side of the tub.
In most cases, the cover can simply be lifted up, revealing the drain stopper and screw. If the cover is stuck, you may need to use a screwdriver to pry it off.
Once the drain cover is removed, you’ll need to break the seal around the drain stopper. This can be done with a pair of slip joint pliers or a lock ring pliers. Carefully grip the outer edge of the drain stopper and twist it counterclockwise.
Once it’s unscrewed, you should be able to pull the stopper out and remove the tub drain catcher.
If you’re still having trouble, you may need to try other methods such as using a coat hanger or a drain key. These tools have a hooked end that can be used to reach into the drain and try to catch the catch the drain catcher.
However, if the catcher is too deep in the drain, you may need to use a plumbing snake to reach in and grab the catcher.
Once the drain catcher is removed, you should be able to unscrew the drain stopper and complete the installation of the new tub drain. It’s important to remember to use lubricant such as plumber’s putty or silicone caulk when installing any new fixtures to ensure a tight fit and avoid any leakage.
Why can’t I unscrew my bathtub drain?
It is possible that you are unable to unscrew the bathtub drain due to several reasons. It could be that the drain has a threaded top, making it difficult to remove. These types of drains are often secured with a steel ball locking mechanism, which requires specially designed tools to be removed.
It is also possible that the drain is corroded or inflexible, making it difficult to unscrew. In some cases, mineral deposits have built up on the threads, making them too hard to work with. If this is the case, you will likely need to use a professional plumber to remove the drain and replace it.
Finally, it may be that the drain has been glued or sealed in place, either by the manufacturer or by an installer. In this case, it will require a professional with experience in plumbing to safely remove the drain without damaging the pipe, sealing, or the surrounding area.
What are the different types of bathtub drain stoppers?
The different types of bathtub drain stoppers include the Lift and Turn, the Push and Pull, the Trip Lever, the Pop Up, the Toe Touch, the Rotating Ball and Flip-It, the PresFlo, the RollerBall, and the Bottle Trap.
The Lift and Turn drain stopper is in the shape of a knob, where the knob is lifted up to close and then twisted to open. The main advantage of this type of stopper is that it is often the simplest and easiest to install.
The Push and Pull stopper is a variation of the lift and turn, where you push to open and pull to close. It also often includes rotating a knob to close.
The Trip Lever stopper is another easy to install option. It features a lever located near the drain area and has minimal water loss.
The Pop Up stopper is typically manually operated and is beneficial because it doesn’t require the bathtub to be filled with water to create the seal. However, it is the most susceptible to clogs and leaks.
The Toe Touch stopper is a hands-free option and features a foot pedal that has to be pressed down to close.
The Rotating Ball and Flip-It stopper is a two part system that has a ball and a spring that allows you to turn the ball to open or close the stopper.
The PresFlo stopper is air-operated, meaning it uses water pressure to open and close the bathtub drain.
The RollerBall stopper functions like a pop-up stopper but with a roller to c lose the drain.
The last type of stopper is the Bottle Trap drain stopper. This is the most complex bathtub drain stopper, as you have to assemble a number of pieces and have a fairly deep basin in order to install.
However, it functions without the need of a stopper lever, as the water pressure keeps it closed.
How do I know what type of bathtub drain I have?
In order to determine which type of bathtub drain you have, you will need to inspect your drain carefully. In most cases, these drains will be stamped with a size and type, however you may need to look for a manufacturer’s logo to identify the type of drain it is.
Generally, the most common types of bathtub drains are lift-and-turn style drains, push-button drains, trip lever drains and twist-and-lift drains.
Lift-and-turn style drains feature a stopper assembly with a knob at the end that is turned up to open the drain| or turned down to close the drain. A push-button drain is a twist-style drain that is released by pressing down on the button to open the drain.
Trip lever drains will have a lever on one side of the bathtub and will open the drain by pushing down or using the lever to lift the stopper out of the way. Finally, twist-and-lift drains will be opened and closed by turning the stopper assembly in a clockwise or counter-clockwise direction.
Once you have determined which type of bathtub drain you have, you should be able to find a drain replacement specific to your bathtub’s type.
How do I change a bathtub stopper?
Changing a bathtub stopper is a relatively simple process and can usually be done without needing to call in a plumber.
To begin, find the trip lever plate located on the side of your tub. This is the piece of metal that holds the trip lever handle in place. Unscrew the screws that are holding the plate in place, then carefully remove the plate.
Behind the plate, you’ll see a linkage that connects the trip lever and the stopper. You’ll need to disconnect this linkage, in order to change the stopper.
Once the linkage has been removed, use a pair of channel lock pliers to unscrew the stopper body from the overflow pipe. Once the stopper has been removed, take it to the local hardware store to find a new one that matches.
Once you have the new stopper, use the pliers to reattach the stopper to the overflow pipe.
Finally, reattach the linkage, trip lever plate, and handle. Begin by attaching the linkage back to the overflow pipe. Then, attach the trip lever plate and handle back onto the side of the tub. Make sure all of the connections are secure, then give the lever a few test pulls to make sure it’s working properly.
With that, your bathtub stopper should now be changed.
How do you remove a spring loaded tub stopper?
Removing a spring loaded tub stopper can be a tricky process, depending on the type of stopper you have.
First, check the top of the stopper for a screw or small tab. If present, remove the screw or tab to access the screw below. Unscrew it and set it aside.
Grab the knob on the top of the stopper and unscrew it counterclockwise. Then, with one hand on the stopper, put the other hand beneath and unscrew it. Set the knob aside.
Once the knob and screw have been removed, lift up on the stopper. You should then be able to access the rubber gasket beneath. Push the gasket down, allowing it to go out far enough that the stopper can lift up.
Once the stopper is lifted up and out of the drain, the spring assembly should come out with it. Pull out the spring assembly and discard it.
In most cases, that should complete the process of removing the spring-loaded tub stopper. After discarding the components that you’ve removed, you can now install your new tub stopper following the same process in reverse.
How do you use a push and pull drain stopper?
Using a push and pull drain stopper is quite simple. First, place the drain stopper over the drain and make sure it is centered and secure. Next, locate the stopper stopper’s operating lever or knob.
If it is a knob or lever, push or pull it to either open or close the drain. If it is a piston or toggle style, this can be done by pushing down or pulling up the stopper. When it is time to remove the stopper, simply pull it out of the drain by the stopper handle.
After use, make sure to clean the stopper and the drain before re-inserting the stopper in order to prevent clogs or other plumbing issues.
Are shower drain stoppers universal?
No, shower drain stoppers are not universal. Since shower drain stoppers need to fit proper plumbing connections, there is no one size fits all solution. From pop-up stoppers that manually lift up and down, to stoppers with trip levers that can activate a drain plug.
Each of these types come in a variety of sizes and styles that are designed to fit different plumbing sizes and heights. The easiest way to determine which type of drain stopper you need is to remove an existing type and find the manufacturer’s name.
Once you have the make and model, you can look for compatible replacement stoppers from the same company.
What size is tub drain stopper?
The size of a tub drain stopper typically depends on the type of tub drain you have. There are three common sizes of drain stoppers:
1. Standard Stoppers — Usually sized at 1-1/2 inches and are compatible with most tub drains.
2. Oversized Stoppers — These are typically 2-3/8 inches and are common in jacuzzi tubs, garden tubs and other oversized tubs.
3. Mini Stoppers — Smaller than the standard size and are used in Bathroom and Pedestal Sinks.
When purchasing a drain stopper, it’s important to measure your drain hole and match it to the proper stopper size. If you’re not sure of the size, bring a piece of your old stopper to the store to ensure you get the exact fit for your tub.
Is it easy to change a tub drain?
It depends on what kind of tub drain you need to replace. If the tub drain is old, corroded, and generally in bad shape, it can take longer and be more challenging. On the other hand, if the drain is relatively new and in good shape, it can be quite easy to change.
The first step to changing a tub drain is to make sure all the necessary tools are present. This usually includes a screw driver and/or wrench, a pair of pliers, a tub drain remover, and a new tub drain.
After gathering all the required tools, the old drain can be unscrewed and removed. Once the drain is out, it’s important to inspect the surrounding area to make sure there are not any problems or leaking pipes.
If everything looks okay, the new drain can be inserted into the hole and secured using the screwdriver or wrench. If the process is done correctly, the drain should fit perfectly and leak-proof.
Are all bathtub drains the same size?
No, bathtub drains are not all the same size. Depending on the type, size and shape of the installed bathtub. The most common sizes of bathtub drains on the market are 1 ½”, 1 ¼”, 1 1/8”, 1” and ½”, although there are more specialized sizes available for certain types of tubs.
Depending on the setup, some tubs may need an adapter to fit the proper size drain, or two drains of different sizes to accommodate a two-part drain system. The best way to ensure that the bathtub drain will fit correctly is to consult a professional who can measure the drain opening and recommend the correct size of drain for the installation.
Can you replace the drain in a bathtub?
Yes, it is possible to replace the drain in a bathtub. The process may vary slightly depending on the type of bathtub and drain you have, but overall the steps are fairly straightforward. Generally, you would first need to turn off the water supply and take the cover off of the drain.
Once the cover is removed you can unscrew the drain from the pipes below and remove it from the bathtub. Next, you will need to attach the new drain to the pipes, using a sealant or gasket if necessary.
Once the new drain is securely in place, you can test it to make sure it is securely connected and that there are no leaks. Then, you will need to turn the water back on and plug the drain, so that when the bathtub is filled, the water will be able to flow freely through the new drain.
Finally, after confirming that everything is working properly, you can put the cover back on the drain and you should be done.
How much does it cost to replace a tub drain?
The cost of replacing a tub drain will depend on several factors, such as the type of drain you are replacing and the cost of labor. Generally, you can expect to pay somewhere between $150 and $300 for the parts and labor, but this can be higher or lower depending on the type of drain and complexity of the job.
For example, replacing an old tub drain may require further repairs like patching up a tile or replacing a deck, which can raise the cost. Additionally, if you’re replacing a more complex drain like a bath-shower mixer or a pop-up drain, that may increase the cost as well.
Lastly, if you need to hire a professional plumber to complete the job, the cost of labor can range anywhere from $50 – $150 or more depending on your local area.
How do you replace a tub waste and overflow?
Replacing a tub waste and overflow is a relatively easy process. To start the process, gather the necessary materials for the repair. This includes a new tub waste and overflow, a drain rod or plumbing snake, a screwdriver, pliers, a bucket, and some rags.
Once you have all the necessary materials, you should first shut off your water supply to ensure that you don’t cause further damage. Then, remove the old tub waste and overflow. This can be done by removing the screws that hold it in place.
Once the screws are out, you can remove the tub waste and overflow.
Next, you can install the new tub waste and overflow. This is done by lining up the tubes and connections and attaching them with the screws. Tighten the screws evenly to ensure that the part is secure.
Finally, use a drain rod or plumbing snake to clear any clogs that may be in the line. Carefully feed it into the drain to break up the clog without damaging the pipes. After the clog is cleared, you can turn the water back on to double check that everything is working properly.
Replacing a tub waste and overflow may take up to a few hours. However, it is a relatively simple job and does not require too much effort. With the right materials and the proper know-how, it can be done relatively easily.
What is standard bathtub plug size?
The standard bathtub plug size is usually 1-1/2” or 11/2” (1.5 inches) in diameter and is usually a two-hole plug. This size and style generally fits many bathtub drains. However, it’s important to measure the diameter of your own drain before buying a new plug to ensure that it fits.
There are also other bathtub plug sizes available and various shapes and styles, so make sure to compare the measurements of each drain plug available before purchasing one.
How do you measure for a new bathtub plug?
Measuring for a new bathtub plug is fairly easy. You will first need to measure the hole in the bathtub itself, so that you can determine the size plug you need. If you are replacing an existing plug, you can measure the plug to determine its diameter and thread size.
If you’re installing a new plug, you can use a ruler to measure the hole diameter, or use a tape measure for larger holes. You may also need to measure the depth of the thread for the plug, which you can do with a depth gauge.
Once you have these measurements, you can then select a plug of the correct size. In some cases, you may even have to measure the bathtub drain opening, to ensure that the plug does not block the drain entirely.
Can a bathtub have a 2 inch drain?
Yes, a bathtub can have a drain as small as two inches. However, it is important to note that the size of plumbing fixtures, such as bathtub drains, used in bathrooms is regulated by the local plumbing codes in the area where the installation is taking place.
Therefore, depending on the local regulations, there may be a minimum required diameter for a bathtub drain. Additionally, a two inch diameter drain may not be large enough to efficiently and properly drain a bathtub and as such, a larger diameter drain should be considered when selecting a bathtub.